• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.401-406
• /
• 2005

The GFSK Transceiver of 400MHz ISM band for data communication is designed and fabricated. To reduce the occupied bandwidth of transmitted signal, the GFSK modulation is selected. The measured results of fabricated transceiver show the data rate of 2400bps at 8.5kHz bandwidth, frequency deviation of less than $\pm$3kHz, sensitivity of -111dBm, SNR of 21.58dB. The fabricated transceiver is satisfied with the regulation of radio wave and has the good performance. This transceiver is well suited for data communication of 400MHz ISM band.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1061-1064
• /
• 1999

UDP has likely been used for real-time applications, such as video and audio. UDP supplies minimized transmission delay by omitting the connection setup process, flow control, and retransmission In general, more than 80 percent of the WAN resources are occupied by Transmission Control Protocol(TCP) traffic as opposed to UDP's simplicity, TCP adopts a unique flow control in this paper, I report new methods to minimize a udp packet loss considering TCP flow control on the real-time application the better performance of real time application can be obtained when they reduce a packet size and FIFO buffer scheduling method competing with TCP bandwidth for the bandwidth and buffering.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.996-1015
• /
• 2016

A common concern regarding cooperative spectrum sensing (CSS) schemes is the occupied bandwidth and the energy consumption during the transmissions of sensing information to the fusion center over the reporting control channels. This concern is intensified if the number of cooperating secondary users in the network is large. This article presents a new fusion strategy for a CSS scheme, aiming at increasing the energy efficiency of a recently proposed bandwidth-efficient fusion scheme. Analytical results and computational simulations unveil a high increase in energy efficiency when compared with the original approach, yet achieving better performances in some situations, and lower implementation complexity.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.211-211
• /
• 2004

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1546-1555
• /
• 2001

Conventionally, in a CDMA system analysis, we assume only a single path within one chip duration. But, in this paper, we assume various number of multipaths within one chip duration according to spreading bandwidth in fixed channel model. Thus we take into account of the effects of autocorrelation and relative phases among multipath components within one chip duration according to different bandwidth, and analyze fading effects. And we derive the pdf of output signal. Then, we derive the average error probability versus the number of users from derived pdf. We use a Maximal Ratio Combining (MRC) RAKE receiver under the JTC channel model which is one of the popular realistic wideband channel models. And we employ hybrid FDMA/CDMA systems to compare the performance of W-CBMA system for the same occupied total bandwidth. Then, we compare and analyze them for different bandwidth based on the number of users as a parameter. From the simulation results for different bandwidth, better performance can be obtained for wider bandwidth system where more resolvable multipath components are available.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.155-162
• /
• 2007

WFQ (Weighted Fair Queuing) is the most popular fair queuing algorithm, but it had the inherent drawback of a poor bandwidth utilization, particularly under the traffic requiring a low rate but tight delay bound such as internet phone, It was recently identified that the poor utilization is mainly due to non optimized latency of a flow and then LOFQ(Latency-Optimized Fair Queuing) to overcome the drawback was introduced, LOFQ was also improved through introducing an occupied resource optimization function and the implementation complexity of recursive resource transformation was reduced with revising the transformation scheme. However, the performance of LOFQ has been evaluated by means of simulation, so that there are some difficulties in evaluating the performance in the terms of the accuracy and evaluation time, In this paper, we develop how to analytically compute the bandwidth utilization in LOFQ.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.277-285
• /
• 2005

In this paper, we propose the occupied bandwidth(OBW) measurement method for effectively measuring the 99 $\%$ OBW at monitoring station. In order to validate the measurement results obtained from the proposed measurement method, the modified adjacent channel power ratio(MACPR) is herein defined as the formula which was suitable for applying to the OBW measurement of 8-VSB DTV signals. It has been found that the MACPR is a good measurement parameter applicable for the proper site selection of monitoring station and the effective OBW measurement of 8-VSB DTV signals should be made for MACPR$\geq$35 dB with 600 measurement trials. The proposed measurement procedure is herein given and proven to effectively be applicable to the OBW measurement of terrestrial 8-VSB DTV signals on the air.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.629-638
• /
• 2007

The methods of bandwidth measurement in the field environments are notified in ITU-R spectrum monitoring(SM) documents. But, these methods for terrestrial DTV and T-DMB are not informed yet. The x-dB bandwidth is the most suitable method fer the bandwidth measurement of terrestrial digital broadcasting signals. So, we proposed the suitable x-dB value for x-dB bandwidth measurement of the digital broadcasting signal that is not notified in ITU-R SM documents. As a result, we derived the x dB value of -12 dB and -8 dB that can be used fer estimation of occupied bandwidth of DTV and T-DMB signals respectively by x dB bandwidth measurement in field environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.198-206
• /
• 2006

The GFSK Transceiver of 400 MHz ISM band for data communication is designed and fabricated. To reduce the occupied bandwidth of transmitted signal, the GFSK modulation is selected. The measured results of fabricated transceiver show the data rate of 2,400 bps at 8.5 kHz bandwidth, frequency deviation of less than ${\pm}3\;kHz$, sensitivity of -107 dBm at SINAD of 20 dB, BER of less than $1.8{\times}10^{-3}$ at -110 dBm input power. The fabricated transceiver is satisfied with the regulation of radio wave and has the good performance.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.165-168
• /
• 2002

As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.