• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.177-183
• /
• 2004

The out-of-positioned small female drivers are most likely to be injured during airbag deployment due to their stature and proximity to the steering wheel and airbag module. In order to investigate the injury mechanisms, some experimental studies with Hybrid III 5% female dummy and with female cadavers could be found from the open literatures. However, the given information from those experimental studies is quite limited to the standard conditions and might not be enough to estimate the airbag inflation aggressiveness regarding on the occupant responses and injury. In this study, a finite element analysis has been performed in order to investigate the airbag-induced injuries. A finite element 5% female human model in anatomical details has been developed. The validation results of the model are also introduced in this paper.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.230-239
• /
• 1999

A virtual prototyping seeks to virtual environment where the development of vehicle models can be flecible as well as rapid and the experiments can be executed effectively concerning kinematics, controls, and behavior aspects of the models. This paper explains a virtual environment used for virtual prototyping of a vehicle. Ut has been developed using the dVISE environment thar provides actions, events, sounds, and light features. A vehicle model including detailed informations about a real-size vehicle. A human model is introduced for odjective visual evaluations of the developed, and then results are illustrated in order to demonstrate the applicability of developed models.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.136-144
• /
• 2013

An extensive real world in-depth crash accident data is needed to make a precise occupant injury risk prediction at crash accidents which might be a critical information from the scene of the accident in ACNS(Automatic Crash Notification System). However it is rather unfortunate that there is no such a domestic database unlike other leading countries. Therefore we propose a numerical method, i.e., crash simulation using a sled model to make a virtual database that can substitute car crash database in real world. The proposing crash injury risk prediction is validated against a limited domestic crash accident data.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.448-458
• /
• 2001

The primary goal of virtual prototyping is to eliminate the need for fabricating physical prototypes, and to reduce cost and time for developing new products. A virtual prototyping seeks to create a virtual environment where the development of a new model can be flexible as well as rapid, and experiments can be carried out effectively concerning kinematics, dynamics, and control aspects of the model. This paper addresses the virtual environment used for virtual prototyping of a passenger vehicle. It has been developed using the dVISE environment that provides such useful features as actions, events, sounds, and light features. A vehicle model including features, and behaviors is constructed by employing an object-oriented paradigm and contains detailed information about a real-size vehicle. The human model is also implemented not only for visual and reach evaluations of the developed vehicle model, but also for behavioral visualization during a crash test. For the real time driving simulation, a neural network model is incorporated into the virtual environment. The cases of passing bumps with a vehicle are discussed in order to demonstrate the applicability of a set of developed models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.489-494
• /
• 2001

This paper develops a finite element model for frontal crash analysis of a large-sized truck. It is composed of 220 parts, 70,041 nodes and 69,073 elements. This paper explains only major parts' models in detail such as frame, cab, floor, and bumper which affect on crash analysis a lot. In order to prevent penetration not only at a part itself but also between parts, all contact areas are defined using type-36, self-impact type. The developed model's reliability is validated by comparing simulation and crash test results. The results used for model validation are vehicle pulses at B-pillar, and frame and deformation of frame and cab. The frontal crash simulation is performed with the same conditions as crash test. And, it is performed using PAM-CRASH installed in super-computer SP2. The developed model whose reliability is verified may be used as a base to develop a finite element model for occupant behavior and injury coefficient analysis.

• 자동차안전학회지
• /
• 제10권4호
• /
• pp.54-59
• /
• 2018

While the advanced trffic environment systems are developed recently, the traffic systems for transportation vulnerable are still under development and their social life are limited as well. In order to the secure their mobility rights, it had been required to set up the particular system for the traffic welfare. One of the significant items is the express bus operation for wheelchair users. Thus, the research of development and operation for express buses with wheelchair users was funded by the Korean government. Before the express bus development for wheelchair users based on the current bus model, this study set up the evaluation method for the bus rollover characteristics to ensure occupant safety using the finite element method. The partial bus model was developed corresponding to the full bus model response under rollover event and the evaluation method based on two model (full bus model and partial bus model) responses is planned to apply the model development of express bus modification for wheelchair users.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1998년도 춘계학술대회논문집
• /
• pp.149-154
• /
• 1998

The design of seat is maintaining to final stable posture. The final stable posture is the seated posture in which the force of the pad and spring supporting the body is balanced with the body weight and the bodydoes not sink anyfurther intothe seat. With poorly designed seated seats, your behind maygradually move forward, or localized pressure may result in congestion of the blood or numbness, making you want to move. Therefore, the final stable posture is not maintained. A number of ideas were used in this study will eliminate this problem. In automobile seat design, primary attention has forcused on providing the occupant with a comfortable seat that has sufficient padding and adjuxtments toaccomodate different sizes and postures of people. First of all, whether the process is design-oriented or technology-oriented, the design concept must be human-oriented. The fatigue-alleviating seats which were the primary purpose of this research were studied with a human-oriented approach.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.590-599
• /
• 2009

In this paper, a method of modeling seat belts on crew seat during dynamic seat testing was studied. The body segments of the occupant were modeled with joints. The joints consisted with various stiffnesses, dampings, and frictions. Three types of seat belt restraint systems were investigated. The analysis for on the injury assessment of helicopter's crew under drop impact was conducted. The effectiveness of the seat belt system for crashworthiness and safety was evaluated. As the results of impact analysis, head, neck and spine of the crew can be easily damaged in the vertical direction more than the longitudinal direction. Based on the verified model, behavior of human body was studied with three-point restraint systems. The displacement and injury level of the 12-point restraint system was the smallest.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.173-180
• /
• 2004

An intensive study was conducted for the crash worthy structural design of the recently developed Korean High Speed Train (KHST). Two main design concepts were set up to protect both crews and passengers from serious injury in heavy collision accidents, and to reduce damage to the train itself in light collision accidents. A collision against a movable 15-ton rigid obstacle at 110 kph was selected from train accident investigations as the accident scenario for the heavy collisions. A train-to-train collision at the relative velocity of 16 kph was used for the light collision. The crashworthiness behaviors of KHST were numerically evaluated using FEM. Analysis results using 1-D collision dynamics model of the full rake consist and 3-D shell element model of the front end structure showed good crashworthy responses in a viewpoint of structural design. Occupant analyses and sled tests demonstrated that KHST performed well enough to protect occupants under the considered accident scenarios. Finally our numerical approaches were evaluated by a real scale collision test.

• 한국유통학회지:유통연구
• /
• 제3권1호
• /
• pp.145-158
• /
• 1998

The selection of proposed sites for the general logistic center of agriculture products would be made the most suitable place by considering the spread of population as real consumers, the prospect of the demand, the expansion of traffic system, the regional, hourly and carring traffic volume and the use of land based urban planning, etc. As the preconsideration, the possible occupant companies have to be selected on the category of business and the district. After posing questions and having interview, several selected regions would be compared and analysed for deciding the most suitable place. The model for the general logistic center of agricultural products must be selected taking key factors approach for choosing key factors at first and referring to many documentary records. And the more, cooperating with the specialists for location selection and making objective questions to concerned companies, the most suitable place is selected by marking high score for the moderate land cost, the low traffic jam, the connection with the back cities and the possible expansion as the general logistic center of agriculture products.