• Smart Structures and Systems
• /
• 제24권2호
• /
• pp.257-266
• /
• 2019

The benefit of data fusion in improving the performance of Higher Order Sliding Mode (HOSM) observer is brought out in this paper. This improvement in the performance of HOSM observer, resulted in the improvement of active vibration control of a piezo actuated structure, when controlled by a Discrete Sliding Mode Controller (DSMC). The structure is embedded with two piezo sensors for measuring the first two vibrating modes. The fused output of sensors is applied to the HOSM observer for generating state estimates, these states generated are applied to the DSMC, designed for the fourth order linear time invariant model of the structure. In the simulation study, the structure is excited at the first and second mode resonance. It is found that better vibration suppression is obtained, when the states generated by the fused output of sensors is applied as controller input, than the vibration suppression obtained by applying the states generated by using individual sensor output. The closed loop performance of DSMC obtained with HOSM observer is compared with the closed loop performance obtained with the conventional observer. Results obtained shows that better vibration suppression is obtained when the states generated by HOSM observer is applied as controller input.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.121-126
• /
• 2018

본 논문은 관측기 기반의 제어기를 이용한 비선형 다개체 시스템의 일치문제를 다룬다. 이를 위하여 기존의 저이득 제어기에 고이득 접근방법을 결합한다. 리아푸노프 방법을 이용하여 제안한 관측기 기반의 일치 제어기가 삼각구조 비선형 시스템의 일치를 보장해줌을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.110-112
• /
• 2007

Output voltage waves of a DC/AC inverter system are likely to be distorted if variable loads e.g. motors or rectifiers exist in the output terminal. This paper designs a disturbance observer-based PI controller for a single-phase inverter system that is robust against load changes. In this paper, we regard the output voltage changes due to various loads as disturbances of the control system, Then we design a disturbance observer for estimation of the disturbances caused by the load current and any other error sources (such as parameter uncertainties and model mismatches etc.). In order to test the performance of the proposed control law, simulation studies are carried out for a single-phase inverter system using SimPowerSystems of Matlab Simulink. Compared to a simple PI control, the disturbance observer-based controller shows enhanced performance in transient responses for step load changes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.45.1-45
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Takagi-Sugeno Fuzzy Model and Sliding Mode Controller $\textbullet$ Observer and Controller Design $\textbullet$ Simulations $\textbullet$ References

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.74-74
• /
• 2000

This paper presents a neural network controller for a rigid-link electrically-driven robot. The proposed controller is designed in conjunction with three neural networks approximating for complicated nonlinear functions. Particularly, the fact, different from conventional schemes, is that the neural network based current observer is used. Therefore, no accurate measurement of the actuator driving current is required. In the proposed controller-observer scheme, the derived weight update rule guarantees the stability of closed-loop system in the sense of Lyapunov. The effectiveness and performance of the proposed method are demonstrated through computer simulation.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.161-167
• /
• 2001

This paper presents an approach to nonlinear engine idle controller and intake manifold absolute pressure(MAP) observer based on mean torque production model. A stable engine idle speed is important in that the unstable engine Idle mode can make engine to drooping or stall state. A sliding fuzzy controller has been designed to control engine idle speed under load disturbance. A sliding observer is also developed to estimate the intake manifold absolute pressure and compared with the actual MAP sensor value. The sliding mode observer has shown good robustness and good tracking performance. The inputs of sliding fuzzy controller are the errors of rpm and MAP. The output is a duty cycle(DC) for driving a idle speed control valve(ISCV).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.74-76
• /
• 2009

In this paper, search method and sliding mode observer are developed for efficiency optimization of induction motor. The proposed control scheme consists of efficiency controller and adaptive backstepping controller. A search controller for which information of input of fuzzy controller is included in efficiency controller that uses a direct vector controlled induction motor. The search controller is based on the "Rosenbrock" method and finds the flux level at the minimum input power of induction motor. Once this optimal flux level has been determined, this information is utilized to update the rule base of a fuzzy controller A sliding mode observer is designed to estimate rotor flux and an adaptive backstepping controller is also used to compensate for mechanical uncertainties in the speed control of induction motor. Simulation results are presented to validate the proposed controller.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1029-1040
• /
• 1993

이 논문에서는 잘 모르는 플랜트에 대하여 TDC를 위한 관측기를 설계하고, 이 관측기와 TDC제어기가 연결된 전체 계의 안정화에 대하여 해석한다. 그리고 이 관측 기와 TDC제어기를 DC서보 모터 시스템에 적용하여, 모터에 가해지는 외란과 내부의 매개변수 변동에 강힌한 재어기를 설계하고 그 성능을 실험한다.

• 전력전자학회논문지
• /
• 제15권4호
• /
• pp.282-287
• /
• 2010

본 논문에서는 영구자석 동기전동기(PMSM)를 위한 비선형 속도제어기와 Takagi-Sugeno 퍼지 기법을 이용한 퍼지 부하 토크관측기를 제안한다. 또한 제안된 비선형 속도제어기와 퍼지 토크관측기가 존재하기 위한 LMI 조건을 유도하고, 제어기와 관측기의 이득 행렬을 계산하기 위한 선형 행렬 부등식(LMI) 매개변수화가 주어진다. 제안된 비선형 속도제어기와 퍼지 부하 토크관측기의 성능을 검증하기 위하여, 모터 파라미터 및 부하 토크 변동 하에서 시뮬레이션 및 실험 결과가 주어졌다.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1154-1158
• /
• 2011

In this paper, we discuss an observer-based fault tolerant controller design for the T-S (Takagi-Sugeno) fuzzy system with exogenous disturbance. To derive robust controller design conditions, we use $H_{\infty}$ design technique. The design conditions are derived in terms of linear matrix inequalities. An illustrative example is provided to show the effectiveness of the proposed methodology.