• 대한교통학회지
• /
• 제23권4호
• /
• pp.17-28
• /
• 2005

우리나라는 건널목 중 약 91.1%가 정거리 방식을사용하고 있으며, 약 8.9%가 정시간 방식을 사용하고 있다. 정거리 방식의 경우 열차의 종류에 따른 접근속도의 편차를 고려하지 않고 단지 최고속도의 열차를 기준으로 한 건널목 대기시간을 차량운전자와 보행자에게 제공한다. 이는 저속 열차의 통과 시 건널목 대기시간이 길어져 차량 운전자와 보행자의 불만을 야기하며 건널목 대기시간이 필요 이상으로 긴 경우 차량운전자와 보행자는 경고를 불신하게 되고 잘못된 판단을 유도하게 되어 사고가 발생할 가능성을 내포하고 있다. 본 연구에서는 철도건널목의 정확한 정시간 방식의 운영으로 철도건널목 사고예방 및 안전성 향상에 기여하고자 한다. 정확한 정시간 방식의 운영을 위하여 초음파 검지기를 이용한 열차 위치추적 및 속도검지 방식을 개발하였다. 초음파 검지기의 설치위치는 본 연구의 범위인 열차최고속도 160km/h와 새마을호의 최고속도 및 가속도 건널목 최소경보시간을 고려하여 선정하였다. 그리고 개발된 열차 위치추적 및 속도검지 방식의 알고리즘에 대한검증은 사고위험성의 문제로 실내에서 간이시험을 실시하였다. 그 결과 본 연구에서 개발된 열차 위치추적 방식의 경우 실제 열차의 위치와 본 연구에서 개발된 알고리즘에 의한 열차 위치는 일치하였으며, 속도검지 방식은 실제 열차의 속도와 개발된 알고리즘에 의한 속도와의 오차가 최대 0.07m/sec인 것으로 분석되었다.

• 한국수자원학회논문집
• /
• 제36권6호
• /
• pp.925-936
• /
• 2003

본 연구는 Clark의 도달시간-집수면적도륵 이용한 유역추적법에 적용되는 등시간도 작성에 있어 GIS기법을 적용하기 위해 포형자료의 공간 모형화를 수행한 것이다. 기존의 수 작업으로 수행했던 하천종단법 및 Clark-kict법, Laurenson법, SCS법 등의 작업을 일관성 및 재현성을 높일 수 있고, GIS기법이 적용 가능하도록 다음과 같이 공간 모형화를 수행하였다. 하천종단법 및 Clark-kict법은 벡터형태의 실제 하천망도 만을 이용하여 실제 하천망도의 흐름방향과 하천망도기 꼭지점을 점사상 커버리지로 변환하고, 이를 주워진 임의의 두 점 사이의 거리를 흐름방향으로 추적하여 거리를 측정할 수 있는 ARC/INFO의 Route_System을 이용하여 작성할 수 있는 방법을 제시하였다. Laurenson법은 벡터형태의 실제 하천망을 정방형격자의 고도행렬로 표현되는 DEM자료에 위치시켜 실제 하천망을 DEM자료에 정의한 Bum DEM(Equivalent DEM)로부터 유역의 흐름방향과 원본 DEM자료의 경사를 래스터(Raster)기반으로 모형화하였다. S.C.S방법은 토지이용조건과 유속을 경사의 함수로 표시한 공식을 적용할 수 있도록 래스터기반으로 모형화하여 적용하였다. 본 연구에서 제시한 공간 모형화 방법별로 등시간도를 작성하고, HEC-1모형을 이용한 모의 유출수문곡선과 실측 수문곡선를 비교하여 그 적합성을 평가하였다. 평가결과 유역의 토지이용조건과 경사를 고려한 SCS방법이 타 방법에 비하여 비교적 합당함을 보여주웠다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1243-1243
• /
• 2001

During two consecutive years, it was developed global calibrations for the prediction of fatty acids on Iberian pig fat. These equations should analyse well samples of that animal fat because of their high accuracy (SECV/sub C16:0/ = 0.26%; SECV/sub C18:0/ = 0.28%; SECV/sub C18:1/ = 0.26%; SECV/sub C18:2/ = 0.15%) and their broad covering composition range. In some cases, when new samples are predicted H (Mahalanobis distance) values higher than 3 (recommended value for agricultural products by the ISI software) are obtained. However, there are not any obvious factors which tells that samples scanned are very different to the spectral mean of the calibration population. Furthermore, these samples are well predicted according to the SEP values. The objective of the present work is to deepen the understanding of the H statistic when analysing animal fats. Three different validation files were predicted with equations obtained from January '97 to April '98. The Set A has spectra of 20 samples not included on the calibration file and scanned in May of 1998. The Set B has spectra of 20 samples included on the calibration file and scanned again in November '99. The Set C contains 150 spectra of one sample representative of the mean values (for fatty acids composition) of the calibration file. This sample was analysed three times per week during June '99 to July '00. The H mean values for the Set A, Set B and Set C were respectively 1.35, 14.39 and 11.71. These anomalous values for the Set B and C make not sense because Set B contains replicate subsamples of the same samples scanned during calibration development and Set C only contains spectra of one sample which represent the mean spectrum of the calibration files. Results will be shown to demonstrate that small day to day variations are responsible of the high H values. When a PCA and LIB file are created with calibration samples and spectra of the Set C modelling day to day variations, the H values for Set A, Set B and Set C were respectively 1.83, 2.16 and 0.93.

• 한국환경보건학회지
• /
• 제44권5호
• /
• pp.480-490
• /
• 2018

Objective: This study aimed to report the level of extremely low frequency-magnetic field (ELF-MF) emitted by portable hand-held fans (HHF) and to discuss the methodologies for determining the health risk of ELF-MF for HHF products. Method: ELF-MF was monitored at eight locations by distances in the vicinity of HHFs. A total of 13 HHF brands on the market were randomly selected. A portable ELF-MF monitor MDEX II was used to measure the ELF-MF level in the range of 40-800 Hz with a resolution of $0.01{\mu}T$. This study also examined the frequency results of a total of 45 HHF products investigated by the Korean Ministry of Science and ICT (KMSICT). Results: ELF-MF higher than $0.3{\mu}T$ was found to be emitted at a distance of less than 20 cm from 12 HHF. ELF-MF emitted from four products was found to exceed the reference level ($83.3{\mu}T$ based on 60 Hz) recommended by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). KMSIT reported that the principle frequency emitted from the HHFs ranged from 54 Hz to 284 kHz, without the level of LEF-MF. Unscientifically, the KMSICT used the reference level by ICNIRP as the chronic level and concluded that all HHFs are safe with a basis of 1.2-36.0% less than the reference level. Conclusion: The HHF emitted much higher levels of ELF-MF than $0.3-0.4{\mu}T$, which is regarded as the reference level for childhood leukemia. The risk of HHF should be examined in terms of whether they can be used by the general public, including children and pregnant woman.

• Journal of Korean Neurosurgical Society
• /
• 제30권5호
• /
• pp.586-591
• /
• 2001

Objective : Transseptal or sublabial transsphenoidal surgery has been standard teatment for pituitary tumors for decades. However, as an alternative to this surgery endonasal endoscopic technique has been reported with encouraging results. We have started endoscopy-assisted transsphednoidal surgery from May 1998. In this paper we analyzed the methods, outcome, advantage and disadvantage of this surgical approach for the purpose of planning optimal treatment of pituitary tumors. Methods : This study consisits of 13 cases of pituitary tumors who were treated by endoscopy-assisted transsphenoidal surgery using one nostril from May 1998 to July 1999. Mean follow up period was 12.9 months. Results : There was no septal or sublabial incision and little surgical damage to nasal structure. With this technique, rapid surgical approach and short hospital day were possible, being 3-6 days in patients without CSF leakage. Using various angled endoscope, good surgical view was obtained. Initially it was difficult to use various instruments in narrow nasal cavity, but became feasible after several procedures. Among 13 cases, total removal was possible in 11 cases. One of two cases in whom tumor was incompletely removed underwent gamma-knife radiosurgery and second underwent reoperation through subfrontal approach. There were 6 cases of hormone secreting tumors and hormonal remission was achived in all of these cases. Postoperative complications were CSF leakage(6 cases), diabetes insipidus(2 cases) and panhypopituitarysm(1 case). Lumbar drainage was done in all cases of CSF leakage. Conclusion : The advantage of endoscopy-assisted transsphenoidal surgery are rapid surgical approach, low postoperative morbidity, short hospital day and good surgical view. The disadvantage of this appoach are difficulty in manupulating various instruments in narrow nostril and difficulty in distance perception but these problems can be overcome by practice and using stereoscopic endoscope.

• Journal of Korean Neurosurgical Society
• /
• 제45권4호
• /
• pp.213-218
• /
• 2009

Objective : This study is a retrospective clinical study over more than 4 years of follow up to understand the mechanism of load sharing across the graft-bone interface in the static locking plate (SLP) fixation compared with non-locking plate (NLP). Methods : Orion locking plates and Top non-locking plates were used for SLP fixation in 29 patients and NLP fixation in 24 patients, respectively. Successful interbody fusion was estimated by dynamic X-ray films. The checking parameters were as follows : screw angle (SA) between upper and lower screw, anterior and posterior height of fusion segment between upper and lower endplate (AH & PH), and upper and lower distance from vertebral endplate to the end of plate (UD & LD). Each follow-up value of AH and PH were compared to initial values. Contributions of upper and lower collapse to whole segment collapse were estimated. Results : Successful intervertebral bone fusion rate was 100% in the SLP group and 92% in the NLP group. The follow-up mean value of SA in SLP group was not significantly changed compared with initial value, but follow-up mean value of SA in NLP group decreased more than those in SLP group (p=0.0067). Statistical analysis did not show a significant difference in the change in AH and PH between SLP and NLP groups (p>0.05). Follow-up AH of NLP group showed more collapse than PH of same group (p=0.04). The upper portion of the vertebral body collapsed more than the lower portion in the SLP fixation (p=0.00058). Conclusion : The fused segments with SLP had successful bone fusion without change in initial screw angle, which was not observed in NLP fixation. It suggests that there was enough load sharing across bone-graft interface in SLP fixation.

• 복식
• /
• 제41권
• /
• pp.185-206
• /
• 1998

The purpose of this study was to improve productivity for maximum effects with the present equipments and staff. This study compared and analyzed the mea-sured time by using stop watch method and MTM, which was the new measuring method. The flow and results of this study were as follows: 1. This study investigated the theoretical background the efficiency for production management, and the way of productivity improvement through documentary research. 2. Setting up the standard flow on the experi-mental company production, making out a process chart and measuring the actual working hour. 3. The study measured the allowance time applying work sampling. 4. Each process of the movement analysis was filmed by video to use basic data. 5. MTM analysis was taken by choosing 10 processes from front bodice according to the basic movement of MTM. Through the results, this study exclude unneccesary movements and suggest a method for working ways. 6. Using the actual working hour measured by a stop watch calculated the pitch time and presumed the amount of daily productivity. 7. The result of the work sampling came out as 38% of allowance rate. It was 13% higher than the standard amount of woman's jacket allowance rate, which was 25%. The most influencing factor was work discussion. That was because there were commuication problem of the work way between the operator and leader. More adequate use of flow table and level passing table was needed. There were the problems that inappropriate places and sizes made the distance of movements longer and often needed more adjustment of works and surroundings. To prevent breakdowns equipments check ups were necessary before works. 8. The results of MTM analysis were as follow : the time was reduced 40% than the actual measured time by a stop watch. This was because the leveling of the operator was included in the real calculation. Also, leveling was included in MTM analysis and all the conditions were standarized. Therefore MTM method was a scientidic measuring way of establishing the standard time. The presented method of this study, suggested an ideal method eliminating unneccesary motions, and presented standardization of works. Improvement of working methods, work condition and simplifying motions in each 10 processes reduced the working time from total 656 seconds to 301 seconds. 9. The way and time of working was linked together in the MTM analysis methods. Thus data from MTM help suggest not only establishing standard time but also establishing stan-dard work. Plus it includes various ability for improvements of working ways. So it is an objective method which can be widely used in other work studies. 10. The function of a time study is to determine the amount of work produced with a given method. The work rate is used to establish the cost of labor. The wage of worker must be calculated per unit time which is deter-mined before the time study is made. This study tried to introduce the incentive rule for deciding wages according to the standard time by MTM method.

• 대한토목학회논문집
• /
• 제36권4호
• /
• pp.617-625
• /
• 2016

본 연구에서는 하천변에 실제로 위치한 지하수 관정 110개를 대상으로 Hunt (1999)의 해석해를 이용하여 양수로 인한 지하수위 강하 및 하천수 감소량을 산정하였다. 대상 관정 각각에 대해 양수량 대비 하천수 감소량을 산정한 결과 대부분의 관정에서 양수기간 5년 동안 평균적으로 80%를 초과하는 것으로 분석되었다. 하상수리전도도가 $1.0{\times}10^{-9}m/s$로 매우 작고 하천바닥인자(SBF)가 1 보다 작은 경우를 제외하고는 하천경계조건의 영향으로 하천방향 영향거리가 짧아져 비대칭적 지하수위 강하 분포를 크게 유발하는 것으로 나타났다. 하상수리전도도가 $1.0{\times}10^{-7}m/s$보다 크고 하천고갈인자(SDF)가 100 보다 작은 경우에는 하천수 감소율이 80 %를 초과하여 양수의 영향이 크게 발생하였으나, 그 외의 조건에 대해서는 SDF 값만으로 하천 영향의 대소를 판별하기에 한계가 있는 것으로 분석되었다. 또한 하폭이 400 m를 넘는 경우에는 하상수리전도도 변화에 따른 하천수 감소율의 변화가 크지 않는 것으로 분석되었다.

• Animal Systematics, Evolution and Diversity
• /
• 제28권2호
• /
• pp.133-136
• /
• 2012

The objective of this study was to determine the degree of mitochondrial DNA (mtDNA) divergence between two subspecies of $Mustela$ $sibirica$ from Korea ($M.$ $s.$ $coreanus$ on the Korean Peninsula and ($M.$ $s.$ $quelpartis$ on Jeju Island) and to examine the taxonomic status of ($M.$ $s.$ $quelpartis$. Thus, we obtained complete sequences of mtDNA cytochrome $b$ gene (1,140 bp) from the two subspecies, and these sequences were compared to a corresponding haplotype of ($M.$ $s.$ $coreanus$, downloaded from GenBank. From this analysis, it was observed that the sequences from monogenic ($M.$ $s.$ $quelpartis$ on Jeju Island were identical to the sequences of four ($M.$ $s.$ $coreanus$from four locations across the Korean Peninsula, and that the two subspecies formed a single clade; the average nucleotide distance between the two subspecies was 0.26% (range, 0.00 to 0.53%). We found that the subspecies $quelpartis$ is not genetically distinct from the subspecies $coreanus$, and that this cytochrome $b$ sequencing result does not support the current classification, distinguishing these two subspecies by pelage color. Further systematic analyses using morphometric characters and other DNA markers are necessary to confirm the taxonomic status of ($M.$ $s.$ $quelpartis$.

• 대한교통학회지
• /
• 제32권3호
• /
• pp.187-197
• /
• 2014

본 연구는 기업형 슈퍼마켓(Super Supermarket: SSM), 재래시장, 대형마트 이용자의 통행행태와 접근수단별 이용권역을 비교 분석하고, 쇼핑시설에 대해 도시 교통 측면에서 고려해야 할 시사점 도출을 목적으로 한다. 각 쇼핑시설별로 가장 높은 분담율을 보이는 수단의 경우, SSM은 보행(84.5%), 재래시장은 버스(20.1%), 대형마트는 승용차(46.2%)인 것으로 나타났으며, 대중교통수단의 이용권역의 경우 SSM은 667m, 재래시장은 1.6km, 대형마트는 4.2km인 것으로 나타났다. 본 연구를 통해 SSM, 재래시장, 대형마트 이용자들의 선호 교통수단 및 통행특성은 통계적으로 뚜렷한 차이가 있다는 것을 확인하였으며, 이들의 고유 통행 특성에 대한 이해를 바탕으로 보행과 대중교통 이용 편의성을 증진시키기 위한 녹색교통 중심의 도시계획 설계에 기여할 것으로 기대된다.