• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2010

Construction Projects have mutual collaborative structures among various participants for common objectives. Most of all the design project which is the initial phase in the project is crucial for determining project overall quality and requires intimate and continuous relations between project participants. Thus, this study suggests Design Collaboration Management System for successful performing projects through cooperation among participants in the initial stage of projects. First, expert interviews were performed to figure out present conditions of design collaboration management and problems. The factor analysis was applied to draw owner's collaboration factors and engineer's collaboration factors. Based on those factors, this study suggests design cooperation management process which gives a framework for systematic management method. Through the process the design collaboration management system was developed which helps owner/designers/engineer's co-work. The System suggested from this study realizes systematic information management tool and through that it is expected to improve design product;'s quality, and further contribute the advancement of project.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.3
• /
• pp.185-195
• /
• 1994

An experimental study of iron-aluminium partitioning between synthetic garnet and synthetic epidote was carried out, as equilibrium was maintained in the exchange reaction expressed as follows : $Ca_3Fe_2Si_3O_12\+\2\Ca_2Al_2AlSi_3O_12$(0H) = $Ca_3Al_2Si_3O_12\+\Ca_2Al_2FeSi_3O_12$(0H) Temperature has a pronounced effect on the distribution of Fe and A1 between the minerals. However, the pressure effect is not so drastic as in the exchange reaction. With increasing temperature, $Fe^{+3}$ becomes redistributed from garnet into epidote, whereas A1 becomes redistributed from epidote into garnet. This is in line with the general principle of phase correspondence, as the temperature increases the more electropositive metal aluminium redistributes from epidote into garnet. The agreement between the experimental results of this study and the natural samples suggests that $K_D=X^{Ep}_{Fe}/X^{Gr}_{Fe}$ may be a useful geothermometer for metamorphic rocks containing garnet and epidote that are close to binary Fe-A1 compounds.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.65-79
• /
• 2020

As Programmable Logic Controllers (PLCs), popular components in industrial control systems (ICS), are incorporated with the technologies such as micro-controllers, real-time operating systems, and communication capabilities. As the latest PLCs have been connected to the Internet, they are becoming a main target of cyber threats. This paper proposes two sanitizers that improve the security of uC/OS-II based firmware for a PLC. That is, we devise BU sanitizer for detecting out-of-bounds accesses to buffers and UaF sanitizer for fixing use-after-free bugs in the firmware. They can sanitize the binary firmware image generated in a desktop PC before downloading it to the PLC. The BU sanitizer can also detect the violation of control flow integrity using both call graph and symbols of functions in the firmware image. We have implemented the proposed two sanitizers as a prototype system on a PLC running uC/OS-II and demonstrated the effectiveness of them by performing experiments as well as comparing them with the existing sanitizers. These findings can be used to detect and mitigate unintended vulnerabilities during the firmware development phase.

• Design Convergence Study
• /
• v.16 no.4
• /
• pp.1-16
• /
• 2017

As the local manufacturing industry has entered a phase of stagnation, service and product design based on user experience has been highlighted as an alternative for the innovation. However, SMEs(Small and Medium-sized Enterprises) are still struggling to overcome the current crisis. One of the reasons is that SMEs do not have enough contact points with the validated UX firms and experts. Thus, SMEs has a high barrier to invest in new opportunity area, user experience. In this study, we aim to figure out UX experts' competence to perform the UX method to solve the UX problems based on the KSA framework(Knowledge, Skill, Attitude). Based on the literature review and expert workshop, we grouped the UX method according to the similarity of the competence required to conduct the method. With cluster analysis, 5 different groups of UX method were defined based on the competence, Panoramic Analysis, Meticulous Observation and Analysis, Intuitive Interpretation, Agile Visualization, and Logical Inspection. The results would be applied to compose a portfolio of UX experts and to implement a mechanism that could recommend the professional experts to the company.

• Korean Journal of Microbiology
• /
• v.30 no.3
• /
• pp.218-224
• /
• 1992

Recombinant plasmid shuttle vectors were constructed for genetic studies on the oxidation of carbon monoxide by carboxydobacteria. Two vectors. pYK322 (7.2 kb, Ap'. Tc') and pYK 324 (7.2 kb, Ap', Tc'), were constructed using pBR322 and pYK100. a small plasmid in Pseudomonas carbo,xydovorans. Four plasmids. pYK2IO (5.2 kb. Cm'), pYK220 (5.2 kb, Cmr), pYK230 (5.2 kb, Cm'), and pYK232 (5.2 kb. Cm'), were constructed using pACYC184 and pYK100. Transformation of several carboxydobacteria with pYK322 and pYK220 was round to be efficient when the cells were transformed by the methoti of Bagdasarian and Timmis (Curr. Top. Microbiol. Immunol. 96:47-67. 1982) with several modifications; cells growing on 0.2% succinate were harvested at the mid-exponential phase. 10 mM RbCl in transformation solution was substituted with 100 mM KCI. cclls in transformation solution were incubated for 12 h at 4'C before addition of DNA and heat shock was carried out for 3 min at 45$^{\circ}$C. Plasmid vectors used for transformation, however. were not detected from antibiotics-resistant transformants, suggesting that the vectors may be integrated into the chromosomal DNA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.252-261
• /
• 2017

This study examined the effect of heat treatment on the microstructure and mechanical properties of J55 line pipe steel. The experiments were carried out at under the following various conditions: austenization temperature($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), cooling methods(water quenching, oil quenching) and tempering temperature(none, $550^{\circ}C$, $650^{\circ}C$). The phase diagram and CCT curve were simulated based on the chemical composition of J55 steel to predict the microstructures. In the results, A1, A3 temperature decreased. As the austenization temperature increased, existing austenite grains grew exponentially which seriously degraded their mechanical properties. Various microstructures, including martensite, bainite, ferrite, and pearlite, developed in accordance with the heat treatments and were closely correlated with hardness, tensile strength and toughness. Martensite was formed after water quenching, but bainite and ferrite appeared after oil quenching. FeC precipitation formed and coarsened during tempering, which improved their toughness.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.11-20
• /
• 2020

As the manufacturing environment becomes more complex, traditional simulation models alone are having a lot of difficulties in reflecting real-time manufacturing situations. Although the Digital Twin concept is actively discussed as an alternative to overcome theses issues, many studies are being carried out only in the product design phase. This research presents a Digital Twin-based manufacturing environment framework for applying the Digital Twin concept to the manufacturing process. Twin model that is operated in virtual space, physical system and databases describing the actual manufacturing environment, are proposed as detailed components that make up the framework. To check the applicability of proposed framework, a simple Digital Twin-based manufacturing system was simulated in a conveyor system using Arena software and Excel VBA. Experiment results have shown that the twin model is transmitted real time data from the physical system via DB and were operating in the same time unit. The Excel VBA fitted parameters defined by cycle time based on historical data that real-time and training data are being accumulated together. This study proposes operating method of digital twin model through the simple experiment examples. The results lead to the applicability of Digital twin model.

• Journal of the Korean Magnetics Society
• /
• v.13 no.4
• /
• pp.171-175
• /
• 2003

Electron paramagnetic resonance (EPR) of Fe$^{3+}$ in LiTaO$_3$ single crystal, grown by Czochralski method, has been studied by employing an X-band spectrometer. Resonance spectra of Fe$^{3+}$ ion on the crystallographic principal axes were obtained with 9.447 ㎓ at room temperature. The spectroscopic splitting parameter g and zero-field splitting (ZFS) parameter D (= 3 B$_{2}$sup 0/) are calculated with effective spin Hamiltonian. Fe$^{3+}$ center in stoichometric single crystal turns out to be different with that in congruent single crystal reported previously. From the analysis of temperature dependence of resonance fields for Fe$^{3+}$ ion, there is no any phase transition at the temperature range (from -160 $^{\circ}C$ to 20 $^{\circ}C$).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.941-950
• /
• 1991

channel is severely degraded by multipath delay time spread. In this paper. We propose a simple multipath delay time detection method, which has a merit of in serviceable, yet simple H/W realizability for $\pi/4$ shift QPSK by detecting cross channel interference. A $\pi/4$ shift QPSK signal originally has quadrature channel(Q-ch) component. Thus in order to measure CCI between in-phase channel(I-ch) and quadrature channel(Q-ch), which closely related to multipath delay time, Frequency doubling scheme(frequency doubler) and differential detector is proposed, which makes $\pi/4$ shift QPSK signal look like BPSK and also makes it possible for CCI to be detected at I-ch detector output. To get an information from time varying I-ch output signal under the multipath lading environment, a method for obtaining the mean of the absolute value$(V_{MABS}(t))$ and another one for obtaining the root mean square value$(V_{RMS}(t))$ of CCI are proposed. Furthermore, a relationship between delay spread and CCI is also analyzed. In order to confirm theoretical results, computer simulation has been carried out under the quasi-static and Reyleigh distributed two ray multipath fading environments. A fairly good result was obtained. However it was also shown that this method is sensitive to bandwidth restriction to some extent. In addition, some idea for a simple hardware realization for the frequency doubler are given.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.