• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.998-1000
• /
• 2012

By cascading RHTL (Right-Handed Transmission Line) and LHTL (Left-Handed Transmission Line), we fabricated a BPF (Band Pass Filter) in which the phase propagation at the pass band center frequency is fixed as we want. We utilized a positive phase propagation of a RHTL which is a form of LPF (Low Pass Filter) and negative phase propagation of LHTL which is a form of HPF (High Pass Filter). Therefore, if RHTL and LHTL are cascaded, a BPF can be constructed and the phase propagation inside the passband is decided by the number of RHTLs and LHTLs. In this paper, we provide a detailed theory related to it and proved the theory with an actual experiment. In the experiment, we fabricated two BPFs with similar passband. One with $90^{\circ}$ phase shift and the other with $-90^{\circ}$ phase shift at the center of passband. The result of simulation and actual experiment agrees well. This proves the suggested theory is correct and feasible.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.212-219
• /
• 2003

This study is to evaluate the characteristics of SCC at the welded region of high strength steel using acoustic emission(AE) method. Specimens were loaded by a slow strain rate method in synthetic seawater and the damage process was monitored simultaneously by AE method. Corrosive environment was controlled using the potentiostat, in which -0.8V and -1.1V were applied to the specimens. In the case of one-pass weldment subjected to -0.8V, much more AE counts were detected compared with the PWHT specimen. It was verified through the cumulative counts that coalescence of micro cracks and cracks for the one pass weldment with -0.8V were mostly detected. In case of the one pass weldment subjected to -1.1V, time to failure became shorter and AE counts were produced considerably as compared with that of the two pass weldment. It was shown that AE counts and range of AE amplitude have close relations with the number and size as well as width of the cracks which were formed during the SCC.

• Korea Trade Review
• /
• v.45 no.2
• /
• pp.1-16
• /
• 2020

Korea is one of active countries in terms of FTA(Free Trade Agreement) around the globe. Local market is not big enough for Korean companies. This is why Korea is actively participating in FTA with various countries. Individual companies should conform to regulation, policy and system relevant to the agreement. Otherwise, it is not easy for companies to enjoy benefits of FTA. The Korean government is using various FTA programs to support domestic companies, in particular SMEs(Small and Medium-Sized Enterprises). FTA-PASS is a representative program. FTA-PASS is an official program of Korea Customs Service. Korean companies can use the program as free. However, some companies may have difficulties regarding the use of FTA-PASS. The program may cause of compatibility problem related their own ERP(Enterprise Resource Planning) systems. This study is designed to analyze determinants of FTA-PASS and ERP system compatibility. Furthermore this study aims to examine effects of the system compatibility on export performances. This study collected data from Koreas SMEs. In specific, the primary data was based on surveys distributed to 303 SMEs. Based on empirical findings, we could get important determinants to improve compatibility between FTA-PASS and ERP systems. For instance, the government support, product standardization, HS Code clearness and market stability could be considered important determinants. Also, according to empirical findings, a positive relationship between system compatibility an export performance was supported. Analyzing comprehensive determinants of system compatibility can be suggested as an important topic for future research.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.2
• /
• pp.63-68
• /
• 1989

This paper discussed the Multi-PAM inverter for static power supply design. The controller part composed of one-chip microcomputer obtained control pattern simply. The configuration of termination part was composed of double bridge inverter and three-phase, three-winding transformer. The output waveforms using a controller and transformers synthesized the multi-PAM wave form by a voltage level of 22 steps per one-cycle. The output waveforms using the Low Pass Filter approximated to the sine wave.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.1
• /
• pp.3-11
• /
• 2005

Using various thermo-mechanical schedules characterized by varying reheating temperature, deformation temperature and strain, the austenite recrystallization and ferrite refinement of a Nb bearing low carbon steel(0.15C-0.25Si-1.11Mn-0.04Nb) were investigated. For single pass heavy deformations at $800^{\circ}C$, the 40% deformed austenite was not recrystallized while the 80% deformed one was fully recrystallized. Ferrite grains formed in the 80% deformed specimen was not very small compared with those in the 40% deformed specimen, which implied the recrystallized austenite was not more beneficial to ferrite refinement than the non-recrystallized one. In case of deformation in low temperature austenite region, a multi-pass deformation made finer ferrites than a single-pass deformation, as the total reduction was the same, due to more ferrite nucleation sites in the non-recrystallization of austenite for multi-pass deformation. When specimen was deformed at $775^{\circ}C$ that was $10^{\circ}C$ higher than $Ar_3$, the ferrite of about $1{\mu}m$ was formed through deformation induced ferrite transformation(DIFT), and the amount of ferrite was increased with increasing reduction. Dislocation density was very high and no carbides were observed in DIFT ferrites, presumably due to supersaturated carbon solution. By deformation in two phase(50% austenite+50% ferrite) region the very refined ferrite grains of less than $1{\mu}m$ were formed certainly by recovery and recrystallization of deformed ferrites and, a large portion of ferrites were divided by subgrain boundaries with misorientation angles smaller than 10 degrees.

• CELLMED
• /
• v.12 no.4
• /
• pp.15.1-15.3
• /
• 2022

The purpose of this study is to examine the joy, anger, sorrow, and pleasure of Koreans in Arirang songs. Arirang is a representative song that strengthens the collective identity and social bond of Koreans. For Koreans who mainly eat rice, Arirang represents rice, life, and reason for its existence. Koreans have been singing Arirang together for a long time, overcoming pain, sadness, and hardships and consoling their minds and bodies. Arirang is a national music that is loved more and sung more often than the national anthem. The hill on the mountain is not a place to stay. The pass is a passing place. This gives us a lot of thought. We have various difficulties living in the world. The word Arirang means that Arirang is not one state. The end of joy, anger, sorrow, and pleasure is surely a joy. Arirang Pass (Arirang Gogae) is not a staying pass, but a crossing pass. Arirang, which contains joy, anger, sorrow, and pleasure, is a soul song and a consolation medicine for mental and physical health. We suggest that Arirang song compared to standard care may have beneficial effects on anxiety, hope, pain, and depression in patients.

• Journal of Welding and Joining
• /
• v.11 no.3
• /
• pp.34-47
• /
• 1993

Finite element models were developed for thermal and residual stress analysis for the specific welding problems. They were used to evaluate the effectiveness of the various welding heat input models, such as ramp heat input function and lumped pass models. Through the parametric studies, thermal-mechanical modeling sensitivity to the ramp function and lumping techniques was determined by comparing the predicted results with experimental data. The kinetics for residual stress formation during welding can be developed by iteration of various proposed mechanisms in the parametric study. A ramp heat input function was developed to gradually apply the heat flux with variable amplitude to the model. This model was used to avoid numerical convergence problems due to an instantaneous increase in temperature near the fusion zone. Additionally, it enables the model to include the effect of a moving arc in a two-dimensional plane. The ramp function takes into account the variation in the out of plane energy flow in a 2-D model as the arc approaches, travels across, and departs from each plane under investigation. A lumped pass model was developed to reduce the computation cost in the analysis of multipass welds. Several weld passes were assumed as one lumped pass in this model. Recommendations were provided about ramp lumping techniques and the optimum number of weld passes that can be combined into a single thermal input.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.424-429
• /
• 1999

The amplifier properties of single distributed feedback dye laser with 106 ps pulse width and 616 nm wavelength were invested using only one XeCl-excimer laser as pump source. For optimized amplification of DFDL, the three-stage amplifiers were arranged with increasing cross-section and accordingly increasing pump energies. The first AmpI, II stages were dye cell of 5 mm, 10 mm and contained a $6{\times}10^{-4}$ [mol/l](solvent : Methanol) of Rhodamine 610. Double-pass amplification in the AmPII was measured to suppress the ASE by using a diffraction grating. The beam intensity of AmpI, II was saturated with a gain of respectively 10 and 48. The last AmpIII was Bethune cell of 30 mm and contained a $3{\times}10^ {-4}$ [mol/l] (solvent : Ethanol) of Rhodamine 610. In the single-pass and double-pass amplification, the output energy was obtained 168.2 $\mu$J and 471$\mu$J respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.67-76
• /
• 2007

Although Hi-pass have been operated for alleviating traffic congestion and enhancing mobility in expressways since 2000, there is not any standard for safe operation. For that reason, we investigated about tubular markers, which is a typical facility for safety in Hi-pass. Tubular Markers are installed for separating same or opposite traffic flows spatially, supporting the marks at a place which has not only high possibility of accidents but distinguished carefulness of drivers. In this paper, it is noted two considerings; one is prevention of accident from the speed gap of autos and Hi-pass vehicles; the other is guarantee of necessary distance that Hi-pass vehicles could be changes the lanes for off-ramp. Focusing those considerations, it is proposed not only prefer distance of tubular markers, but also fundamental basic subjects. We anticipate that the results of this study would be useful reference in more safe and efficient tollgate operation of Hi-pass.

• Progress in Medical Physics
• /
• v.21 no.4
• /
• pp.340-347
• /
• 2010

DQA, a patient specific quality assurance in tomotherapy, is usually performed using an ion chamber and a film. The result of DQA is analysed with the treatment planning system called Tomo Planning Station (TomoPS). The two-dimensional dose distribution of film measurement is compared with the dose distribution calculated by TomoPS using the ${\gamma}$-index analysis. In ${\gamma}$-index analysis, the criteria such as 3%/3 mm is used and we verify that whether the rate of number of points which pass the criteria (pass rate) is within tolerance. TomoPS does not provide any quantitative information regarding the pass rate. In this work, a method to get the pass rate of the ${\gamma}$-index analysis was suggested and a software PassRT which calculates the pass rate was developed. The results of patient specific QA of the intensity modulated radiation therapy measured with I'mRT MatriXX (IBA Dosimetry, Germany) and DQA of tomotherapy measured with film were used to verify the proposed method. The pass rate was calculated using PassRT and compared with the pass rate calculated by OmniPro I'mRT (IBA Dosimetry, Germany). The average difference between the two pass rates was 0.00% for the MatriXX measurement. The standard deviation and the maximum difference were 0.02% and 0.02%, respectively. For the film measurement, average difference, standard deviation and maximum difference were 0.00%, 0.02% and 0.02%, respectively. For regions of interest smaller than $24.3{\times}16.6cm^2$ the proposed method can be used to calculate the pass rate of the gamma index analysis to one decimal place and will be helpful for the more accurate DQA in tomotherapy.