• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.923-926
• /
• 2009

We fabricated large-area OLED lighting device using screen printing. In order to operate full area of large-area OLED uniformly, each cell in OLED panel was designed to work separately. We connected OLED panel with a PCB electrically using jig pins so that each cell could be operated individually. In this presentation, we report a few important issues on the fabrication of large-area OLED for lighting applications.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.356-363
• /
• 2016

Purpose: The purpose of this study is to propose efficiency of equipment testing the luminance degradation of OLED. Methods: The degradation model of Exponential model and Stretched exponential model is analyzed by goodness of fit test using calculated R-square. The degradation model having the higher R-square is finally selected. Scale parameter and Shape parameter using the selected degradation model is estimated. The activation energy and current density n using peck model among the accelerated model is estimated. the estimated parameters are analyzed by t-test. Results: The results of t-test show that the estimated parameters on chamber and hotplate are equal statistically. we can know the similarity of the luminance degradation rate and degradation pattern on chamber and hotplate. Conclusion: The result of the degradation test on chamber and hotplate is similar. when the accelerated degradation test on the panel of the OLED TV is performed, hotplate is requiring less samples, time and cost than chamber. so the accelerated degradation test on the panel of the OLED TV using the hoplate is efficient of time and cost.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.293-296
• /
• 2002

This paper proposes new driving methods for designing a driver independent of the current property of organic light emitting diodes (OLED) displays. The proposed methods are the Look-Up Table (LUT) and the Pulse Width Modulation (PWM). The LUT is used to handle the amount of the current for driving the OLED display panel and the PWM is applied to represent the gray scale on the OLED display panel. Segment and common drivers were implemented using delay circuits to prevent short-circuit current and a DC-DC converter was designed to supply the drivers with a power source. In particular, tile proposed methods are used for the manufacturing of 1.8" 128$\times$128 dot passive matrix OLED display panel. The designed circuit was fabricated using 0.6w, 2-poly, 3-metal, CMOS process and applied to the Personal Communication System (PCS) phone successfully.ully.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1789-1791
• /
• 2007

We fabricated OTFT-OLED display panel by using Ag-paste for source and drains electrode of OTFTs. The OTFTs were fabricated by solution processes such as spin-coating for PVP gate dielectric and screen printing for S/D electrodes with Ag-paste, except pentacene active layer which was deposited by evaporation. The mobility was 0.024 cm2/V.sec , off state current ${\sim}10-11A$, threshold voltage 7.6 V and on/off current ratio ${\sim}105$. The panel consisted of 16 x 16 pixels and each pixel consisted of 2 OTFTs, 1 Capacitor and 1 OLED. The pixels successfully worked in terms of current magnitude supplied to OLED and the control ability of driving and switching OTFTs.

• Journal of Information Display
• /
• v.11 no.4
• /
• pp.160-164
• /
• 2010

Organic light-emitting devices (OLEDs) have shown superior characteristics and are expected to dominate the nextgeneration flat-panel displays. Active-matrix organic light-emitting diode (AMOLED) displays, however, have stringent demands on the performance of the backplane. In this paper, the development of thin-film transistors (TFTs) based on indium gallium zinc oxide (IGZO) on both Gen 1 and 6 glasses, and their decent characteristics, which meet the AMOLED requirements, are shown. Further, several display prototypes (e.g., 2.4" AMOLED, 2.4" transparent AMOLED, and 32" AMLCD) using IGZO TFTs are demonstrated to confirm that they can indeed be strong candidates for the next-generation TFT technology not only of AMOLED but also of AMLCD (active-matrix liquid crystal display).

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.21-27
• /
• 2020

Recently, LCD (Liquid Crystal Display) has been replaced by OLDE (Organic Light Emitting Diode) in high resolution display industry. In the process of OLDE production, it inspects defective products by sending a signal using a probe during OLED panel inspection. At this time, the cause of the detection of failure is divided into two. One is the self-defect of the OLED panel and the other is the poor contact occurring in the process of contact between the two. The second case is unknown at the time of testing, which increases the time for retesting. To this end, we made a system that can identify in real time whether the probe is in contact during the inspection. A contact probe unit was designed for the system, and a stage system was implemented. An inspection system was constructed through S / W and circuit configuration for actual inspection. Finally, a system that can check contact and non-contact in real time was constructed.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1009-1010
• /
• 2008

This paper presents a real-time aging measurement and feasible compensation system for the prolonged lifetime of OLED panel. The proposed system is composed of four parts, a PC with a man-machine interface, a measurement block, an adaptive amplifier block, and a compensation block. We apply a tree algorithm for less complexity and convenience of measurement on the degree of aging. An adaptive multi-stage differential amplifier is also implemented to deal with a various range of input voltages at the same spot.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.293-294
• /
• 2012

백색 OLED 조명 분야에서 색 변환은 큰 이슈가 되고 있다. 하지만 청색 유기물의 발광 특성이 좋지 못하여 아직까지 정착이 되지 못하고 있는 것이 현실이다. 본 연구에서는 발광 효율이 낮은 청색 OLED 대신 청색 LED와 황색 OLED를 사용하여 색 변환을 통한 백색 발광 panel을 제조하고 전기 및 광학적 특성을 평가하였다. 먼저 OLED소자는 진공증착방법을 사용하여 ITO (150 nm)/KHI-001 (5 nm)/LG-101 (10 nm)/KHT-001 (25 nm)/ PGH-02 (25 nm): Ir (mpp) 3 (8%): PRD-003 (0.3%)/TMM-004 (10 nm)/LG-201 (20 nm): LiQ (50%)/Al (150 nm) 구조를 갖는 발광면적 $70{\times}70mm^2$의 황색 OLED panel을 제작하였다. CIE 1931색좌표는(0.49, 0.49)이고, 효율은 $41.61{\ell}m/W$이다. 그리고 LED는 청색 칩을 한 줄로 나열하여 LED bar를 만들었고 여기에 도광판, 리버스 프리즘시트, 확산시트 그리고 반사시트를 더하여 점광원을 면광원화 하였다. CIE 1931색좌표가 (0.15, 0.04)이며 효율은 $3.56{\ell}m/W$이다. 황색 OLED를 청색 LED 면광원 뒤에 붙여서 두 빛이 도광판 위쪽으로 나오게 하였다. 이렇게 hybrid된 빛은 인가 전류를 변화 시킴으로써 색온도 3,200 K의 warm white에서 7,800 K의 cool white까지 변환이 가능하였다. 그리고 순백의 hybrid 빛을 얻을 수 있었는데 이때의 색온도는 4200K이고 CIE 1931색좌표는(0.34, 0.33)이며 연색지수는 89였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.64-67
• /
• 2005

We fabricated an array consisting of organic TFTs(OTFT) and organic LEDs (OLED) in order to demonstrate the possible application of OTFTs to flexible active matrix OLED (AMOLED). The panel was composed of $64{\times}64$ pixels on 4 inch size polyethylene-terephehalate (PET) substrate in which each pixel had one OTFT integrated with one green OLED. The panel successfully displayed some letters and pictures by emitting green light with a luminance of $1.5\;cd/m^2$ at 6 V, which was controlled by the gate voltage of OTFT.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.277-280
• /
• 2004

Thin-film photosensors on organic light emitting diode (OLED) glass substrates using active-matrix OLED TFT manufacturing processes have been constructed and optimized, and their performance has been characterized. Suitable control circuitry and applications are proposed. The photosensors may be integrated into OLED displays for detection of ambient illumination and for detection of OLED light emission, thereby enabling output, uniformity, and aging compensation.