• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.149-152
• /
• 2005

본 논문은 디지털 마이크로파 다수 반송파 시스템에 적용되는 고안정 국부발진기의 위상잡음에 대해서 분석하였다. 위상잡음의 영향을 분석하기 위해 Lorantizan모델을 사용하여 위상잡음 분산값을 구하였으며, 기저대역 I, Q채널에서 BER과의 특성을 모의실험 하였다. 시스템에 미치는 영향을 알아보기 위해서 BER특성을 분석한 결과, 위상잡음에 따라 영향을 많이 받으며, 특히 고차원 변조방식을 가질수록 위상잡음에 더 영향을 많이 받음을 확인하였다. 모의실험결과 BER을 10$^{-5}$을 기준으로 했을 경우, QPSK 변조방식은 분산값에 따라서 대략 4dB, 16-QAM 변조방식은 대략 9dB 정도의 성능차이를 나타내었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.398-402
• /
• 2008

Cyclic prefix (CP) is one of the most important technique to OFDM system and is reducing inter-symbol interference (ISI) effects in high speed wireless mobile communication system. At the time varying channel condition, however, fixed CP length is not only increasing power consumption but also reducing data transmission rate. So in this paper, we propose the system that has adaptive CP length for high speed data transmission system. We don't control CP length of every symbol but adjust symbol interval depending on channel condition to CP reconstruction.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.95-100
• /
• 2024

Cyclic Delay Diversity (CDD) is a diversity scheme used in OFDM-based telecommunication systems, transforming spatial diversity into frequency diversity and thus avoiding intersymbol interference without entailing the receiver to be aware of the transmission strategy making the signal more reliable achieving full diversity gain in cooperative systems. Here the analyzation of the influence of CDD-SC scheme in Cognitive Radio Network (CRN) is done with the challenge of overcoming the complication called channel estimation along with overhead in CNR. More specifically, the closed-form expressions for outage probability and symbol error rate are divided under different frequencies among independent and identically distributed (i.i.d.) frequency selective fading channel model i.e., the signal is divided into different frequencies and transmitted among several narrow band channels of different characteristics. It is useful in the reduction of interference and crosstalk. The results reveal the diversity order of the proposed system to be mainly affected by the number of multipath components that are available in the CNR.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.175-181
• /
• 2015

In this paper, we develop a 2.4GHz ISM band wireless communication platform prototype based on embedded linux which support can be u-Hospital service. The developed system is available connecting between ARM920T processor board and FPGA board and linking IEEE 802.11b PHY board, AD/DA(10Bit) and RF(2.4GHz) board for wireless access. It is also can be utilized for the embedded system design with IEEE 802.11b/g Access Point(Option: IEEE 802.11a/b/g) test due to the Embedded Linux. Also, the developed system is possible to test and verify the radio access technology, Modem(OFDM etc) and IP(Intellectual Property) circuit. And make the most use of the system, we search for a expansion to that home and mobile healthcare, wellness service application.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.183-191
• /
• 2010

In the recent digital communication systems, the performance of Turbo Code used as the error correction coding method depends on the interleaver size influencing the free distance determination and the iterative decoding algorithms of the turbo decoder. However, some iterations are needed to get a better performance, but these processes require a large time delay. Recently methods of reducing the number of iteration have been studied without degrading original performance. In this paper, the new method of combining ME (Mean Estimate) stopping criterion with SDR (sign difference ratio) stopping criterion among previous stopping criteria is proposed, and the fact of compensating each method's missed detection is verified. Faster decoding is realized that about 1~2 time iterations to reduced through adopting this method into serially concatenated both decoders. System Environments were assumed W-CDMA forward link system with intense MAI (multiple access interference).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.19-25
• /
• 2008

When there are numerous wireless communication systems co-existing in the limited available frequency resource, an unexpected time delay can be caused during the system switching. So, in order to reduce this time delay, a mode selection method is required. In this paper, we propose a mode selection method to minimize the time delay for multi-system wireless communication systems. For the sake of efficiency, the mode selection method is designed by analyzing the preamble characteristics of different standards. Instead of performing a full search, we propose the preamble partial search to reduce the time delay to a minimum. Simulated with Matlab in an additive white Gaussian noise(AWGN) environment with a signal to noise ratio(SNR) of 10dB and bit error rate(BER) of $10^{-6}$, we evaluated and showed the performance improvement gained by using our proposed mode selection method.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.2
• /
• pp.4-18
• /
• 2002

In this paper, we propose the new design method for the OFDM based modem that is considerd a standard of wireless communication in indoor environments. We designed a improved FFT/IFFT in order to satisfy a data rate $6{\sim}54$Mbps required homenetworking of high speed and a improved channel equalization circuit using pilot signals for modile environments. And we designed a carrier offset estimator that uses the $tan^{-1}$ circuit to organize a memory structure. All steps are verifed performance through a FPGA and are implemented ASIC to use a standard library cell.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.219-226
• /
• 2021

LED-to-LED VLC is a technology that uses LEDs as both a transmitter and a receiver unlike the typical VLCs. In this paper, we experimentally demonstrate a micro LED-to-LED VLC using Micro LED. We tested all the possible VLC cases using red, yellow, green, blue, and white color LED as both a transmitter and a receiver, and measured rise time and SNR. Then we calculated channel capacity depending on the LED color sets. Our experimental results show that the best channel capacity is 125 kbps when the transmitter micro LED was blue and the receiver LED was green. We also measured BERs of VLCs using OFDM signal, and we showed a successful micro LED-to-LED VLC upto 250 kbps.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.2
• /
• pp.1-8
• /
• 2005

In this paper, n system did research about effect that interference effect with neighborhood single equipment or group equipment gets in DMB service. For this, 2.6425 GHz SDMB(Satellite Digital Multimedia Broadcasting) that a special of electric wave interference is near frequency-band including interference of signal by unnecessary radiation level that is radiated in UWB system, and degree of 3.4125GHz broadcasting relay net that is In-band frequency-band and interference effect that get in service analyzed comparison ud, modulation of broadcasting relay net and interference measurement equipment used Impulse and OFDM methods. Impulse method was $BER=1{\times}10^4$ that broadcasting signal receiption is possible at 1.4m point because interference effect happens from 2m point in SDMB system, and it was $BER=1^{\times}10-4$ that OFDM method receives interference effect from 0.8m point and broadcasting signal receiption is possible at 0.5m point. Also, about gap-filler center frequency, in case of space interval more than 0.01m, there was no interference effect. Therefore, for the electric wave of W system that is small output applies to system without interference effect in DMB service, confirmed that UWB system of OFDM method is less interference effect than UWB system of impulse method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.253-256
• /
• 2009

This paper describes a core generator (FFT_Core_Gen) which generates Verilog HDL models of 8 different FFT/IFFT cores with $N=64{\times}2^k$($0{\leq}k{\leq}7$ for OFDM-based communication systems. The generated FFT/IFFT cores are based on in-place single memory architecture, and use a hybrid structure of radix-4 and radix-2 DIF algorithm to accommodate various FFT lengths. To achieve both memory reduction and the improved SQNR, a conditional scaling technique is adopted, which conditionally scales the intermediate results of each computational stage, and the internal data and twiddle factor has 14 bits. The generated FFT/IFFT cores have the SQNR of 58-dB for N=8,192 and 63-dB for N=64. The cores synthesized with a $0.35-{\mu}m$ CMOS standard cell library can operate with 75-MHz@3.3-V, and a 8,192-point FFT can be computed in $762.7-{\mu}s$, thus the cores satisfy the specifications of wireless LAN, DMB, and DVB systems.