• KSBB Journal
• /
• v.15 no.6
• /
• pp.670-672
• /
• 2000

Azotobacter vinelandii UWD synthesizes poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), one of the biodegradable polymers, when odd and even number carbon sources are simultaneously added to a medium. In this study, we investigated the specific growth rate of Azotobacter vinelandii UWD on propionic acid and valeric acid. The specific growth rates were $0.183 hr^{-1} and 0.137 hr^{-1}$ at 1.0∼1.5 g/L of propionic acid and 1.0 g/L of valeric acid, respectively. When a mixture of 0.75 g/L of propionic acid and 0.5 g/L of valeric acid was added to the medium, the specific growth rate was 0.196 hr(sup)-1, which was equal to or higher than those of the individual organic acids. Among 10∼50 g/L of glucose cell growth was best at 20 g/L.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7C
• /
• pp.534-539
• /
• 2008

For an odd prime p, n=4k, and $d=((p^{2k}+1)/2)^2$, Seo, Kim, No, and Shin derived the correlation distribution of p-ary m-sequence of period $p^n-1$ and its decimated sequences by d. In this paper, two new families of p-ary sequences with family size $p^{2k}$ and maximum correlation magnitude $[2]sqrt{p^n}-1$ are constructed. The linear complexity of new p-ary sequences in the families are derived in the some cases and the upper and lower bounds of their linear complexity for general cases are presented.

• Structural Engineering and Mechanics
• /
• v.56 no.6
• /
• pp.939-957
• /
• 2015

In this paper, a new approach based on the continuum model is proposed to estimate the main cable tension force of suspension bridges from measured natural frequencies. This approach considered the vertical vibration of a main cable hinged at both towers and supported by an elastic girder and hangers along its entire length. The equation reflected the relationship between vibration frequency and horizontal tension force of a main cable was derived. To avoid to generate the additional cable tension force by sag-extensibility, the analytical solution of characteristic equation for anti-symmetrical vibration mode of the main cable was calculated. Then, the estimation of main cable tension force was carried out by anti-symmetric characteristic frequency vector. The errors of estimation due to characteristic frequency deviations were investigated through numerical analysis of the main cable of Taizhou Bridge. A field experiment was conducted to verify the proposed approach. Through measuring and analyzing the responses of a main cable of Taizhou Bridge under ambient excitation, the horizontal tension force of the main cable was identified from the first three odd frequencies. It is shown that the estimated results agree well with the designed values. The proposed approach can be used to conduct the long-term health monitoring of suspension bridges.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.15-21
• /
• 2009

High-order harmonic generation from a solid surface affected by the contrast of a laser pulse was studied using an oscillating mirror model. High-order harmonics generated from solid surfaces have unusual properties such as spectral redshift, and an intensity difference between even- and odd-order harmonics which is not reported for high-order harmonics generated by a gas medium. We confirmed that high-order harmonics from solid surfaces have selectivity of polarization as well as cut-off extension and the enhancement of conversion efficiency proportional to laser intensity. And the principle of operation and the characteristics of a plasma mirror system developed for achieving high contrast laser pulses to pursue the experimental realization of high-harmonic generation from solid surfaces are reported. Energy fluence on the plasma mirrors is tunable between $10\;J/cm^2$ and $1000\;J/cm^2$ and around 1000 shots are available before the plasma mirrors require replacement.

• ETRI Journal
• /
• v.21 no.1
• /
• pp.28-39
• /
• 1999

Koblitz has suggested to use "anomalous" elliptic curves defined over ${\mathbb{F}}_2$, which are non-supersingular and allow or efficient multiplication of a point by and integer, For these curves, Meier and Staffelbach gave a method to find a polynomial of the Frobenius map corresponding to a given multiplier. Muller generalized their method to arbitrary non-supersingular elliptic curves defined over a small field of characteristic 2. in this paper, we propose an algorithm to speed up scalar multiplication on an elliptic curve defined over a small field. The proposed algorithm uses the same field. The proposed algorithm uses the same technique as Muller's to get an expansion by the Frobenius map, but its expansion length is half of Muller's due to the reduction step (Algorithm 1). Also, it uses a more efficient algorithm (Algorithm 3) to perform multiplication using the Frobenius expansion. Consequently, the proposed algorithm is two times faster than Muller's. Moreover, it can be applied to an elliptic curve defined over a finite field with odd characteristic and does not require any precomputation or additional memory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.525-529
• /
• 2009

Most of FLC received input data from error e and change-of-error e' with no relation with system complexity. Basic scheme follows typical PD and PI or PID Controller and that has been developed through fixed ME In this paper, We studied the relationship between MF and system response and system response through changing Fuzzy variable of consequence MF and propose the simple FLC using this relationship. The response of FLC is changed according to the width of Fuzzy variable of consequence MF. As changing the Fuzzy variable of consequence MF shows various nonlinear characteristic, we studied the relation between response and MF using analytical method. We designed the effective FLC using three-variable MF and nine rules and took simulation for verification. In this study, we propose the method to design system with FLC in stability point which is an impotent characteristic of designing system. The circle criterion which is adapted to analysis the nonlinear system is put to use for proposed method. Since SISO FLC has a time-invariant and odd characteristic we can use the critical point not disk which is generally used to determine the stability in the circle criterion, to determine the stability. Using this, we can get the maximum critical point plot of SISO FLC with changing the consequence fuzzy variables. The predetermined critical point plot of FLC can be used to decide the region of the system to be stable. This method is effectively used to design the SISO FLC.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.2
• /
• pp.219-223
• /
• 2012

The purpose of this study was to investigate the body composition, biochemical parameters, and consumption of convenience foods according to leptin receptor polymorphism in university students. A survey was conducted on a total of 418 students - 271 males and 147 females. Based on a self-reporting method, questionnaires were administered for over 20 minutes, and leptin receptor and blood samples were analyzed. The genotype frequencies of leptin receptor polymorphism were Gln/Arg heterozygote (64.8%) and Gln/Gln homozygote (35.2%). Leptin polymormphism showed no significant association with biochemical parameters(ALT, cholesterol, triglyceride, HDL-cholesterol, LDL-cholesterol, and hemoglobin) and body composition. GG homozygote was associated with a higher risk of visceral fat obesity compared to those with GA heterozygote (odd ratio 1.758, 95% confidence intervals 0.812~3.803). Leptin polymorphism appeared to be a genetic risk factor for visceral fat obesity. This study suggests that leptin polymorphism has a causative role to body fat distribution in Korean.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.22-31
• /
• 2000

A new analysis method of Tap-011 for CATV and DBS systems was proposed and investigated by using 4-port and 3-port equivalent circuits. As an analysis method the even odd-mode theory for a symmetrical coupled-line directional coupler was introduced, and then it was applied to transformer type directional coupler. By comparing the results of simulation and measurement, the validity of the proposed analysis method was confirmed. Furthermore, the Tap-off has been broadened from 5 MHz to 2.500 MHz by adopting the proposed theory.

• Korean Journal of Occupational Health Nursing
• /
• v.23 no.4
• /
• pp.269-276
• /
• 2014

Purpose: The purpose of this study was to investigate muscle pains of emotional laborers and determine whether there were differences in their muscle pains depending on the hours spent on emotional labor. Methods: This is a secondary analysis of the data collected from the 3rd (2011) Korean Working Conditions Survey. 50,032 participants responded to the study's questionnaire. Among them, 15,669 participants were emotional laborers who directly dealt with people such as customers, passengers, pupils, patients, etc. Results: Thirty three percent of subjects had reported muscle pains. Muscle pains of subjects were positively related to the hours spent on emotional labor (p<.001). According to the logistic regression analysis, the adjusted odd ratio of the subjects who spent about almost all of the work hours on emotional labor was 1.32 (95% CI: 1.15~1.52), compared to the subjects who spent about a quarter of their work hours on emotional labor, when other factors were controlled. Conclusion: The study's findings indicate that engaging in emotional labor for longer hours increases the risks of muscle pains. Occupational nurses must pay closer attention to the management of muscle pains of emotional laborers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1115-1121
• /
• 2017

In order to obtain high thrust at the beginning of the flight, the solid rocket motor with large initial burning surface area was designed and tested. From the static firing test, lower initial thrust was obtained compared with the expected thrust based on the internal ballistic prediction due to the negative erosive burning effect which reduced the burning rate estimated by APN Law. In addition, the radial mode combustion instability was observed with 8 fins grain configuration. This instability was removed after the odd number of fins were used.