• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.17-17
• /
• 2012

수송용 섬유소재는 자동차, 항공기 또는 선박 등의 교통 및 운송 분야에 기여하는 사용되는 섬유소재를 말하며, 내장재, 각종 호스류, 벨트류, 타이어, 안전용품, 필터류 등을 포함하고 일반적으로 섬유, 발포체, 고무, 플라스틱, 접착제 등 유기소재가 결합된 복합체이다. 기존 섬유기술의 혁신과 더불어 IT, NT, BT, ET 등 첨단 기술과의 융합에 의한 고성능 극한 슈퍼섬유, 나노 복합섬유 등의 신소재를 개발하여 산업 전반에서 플라스틱의 금속소재 대체수요를 증가시키고 산업자재의 고성능화, 고기능화, 다양화를 이루기 위해 다양한 노력이 진행하고 있다. 현재 수송용 섬유소재 산업은 기술의 연결고리가 부족하며, 선도기업 및 원천기술이 부족하며, 자동차용 섬유부품소재 관련 기업의 역량도 부족한 실정이다. 이에 광역경제권 연계협력사업을 통해 생산기반의 대경권(대구경북)과 수요중심의 동남권(부산경남)의 네트워크를 강화하여 완성품 업체 및 수요기업과의 네트워킹을 강화하고자 한다. 따라서 본 연구에서 수송용 섬유소재개발, 수송용 친환경 oam-skin 일체형 표피재 개발, 고속성형 복합소재 및 수송용 경량부품 개발, 초경량 고내열 고강도 섬유활용 하이브리드 wire & cable 개발 등 수송용 섬유소재를 개발하고, 또한 수송용 섬유소재의 생산-수요 연계를 통한 투자활성화, 기술개발, 소재 산업 육성을 강화하여, 산학연네트워크구축, 지역 간 협력 및 국제적 협력, 생산-수요기반의 연계협력시스템을 활용한 자립형 수송용 소재 공급기지 완비하는 데 목적이 있다.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.71-76
• /
• 2003

Internet traffic is getting tremendously heavier due to the exponential growth of the Internet users, the spread of the E-commerce and the network games. High-speed routers for fast packet forwarding are commercially available to satisfy the growing bandwidth. A high-speed router, which has the decentralized multiprocessing architecture for IP and routing functions, consists of host processors, line interfaces and switch fabrics. In this paper, we propose a software architecture tuned for high-speed non-forwarding packet manipulation. IPCMP (Inter-Processor Communication Message Protocol), which is a mechanism for IPC (Inter-Processor Communication), is also proposed and implemented as well. Proposed IPC mechanism results in faster packet-processing rate by 10% as compared to the conventional IPC mechanism using UDP/IP.

• Korean Journal of Animal Reproduction
• /
• v.16 no.3
• /
• pp.209-215
• /
• 1992

These studies were carried out to overcome 2-cell block and in vitro development to blastocysts in vitro fertilization of mouse embryos. The unfertilized ova were obtained by superovulation in ICR mice of 4 to 6 weeks old. Tyrode's 280 solution was used as basal media, and the pH range of media examined was designed from 6.5 to 7.5 with 0.2 interval and the range of osmolality from 250 to 370 mOsm with 20 interval, and the period of sperm preincubation examined was 30, 60, 120, and 180 minutes. The ova developed to 2-cell embryos after 26hrs of incubation with preincubated sperm were evaluatated as in vitro fertilized ones. The results obtained were summarized as follows: 1. The optimal ranges of pH and osmolality of culture media and of sperm preincubation time for in vitro development of in vitro fertilized ova to blastocyst were pH 7.1 to 7.3, 250 to 350 mosmol and 60 to 180 min, respectively. 2. With the media of pH 7.1, 310 mOsm and sperm preincubation period of 120min in another experiment of large sample size, the in vitro fertilized ova was found 66.5% and the in vitro development of in vitro fertilized ova to blastocyst was found 35.8%. From the above results it was concluded that the optimal conditions of pH and osmolality of the media for mouse IVF and embryo culture, and the period of sperm preincubation might be 7.1, 310 mOam and 120min, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.369-378
• /
• 2003

This paper presents design and VLSI implementations of a reassembly processor for ATM/AAL. The assembly processor is responsible for processing ATM cells from the receive physical interface. It controls the transfer of the AAL payload to host memory and performs all necessary SAR and CPCS checks. We propose the improved structure of cell identification algorithm and smart scatter method for host memory management. The proposed cell identification algorithm quickly locates the appropriate reassembly VC table based on the received VPI./VCI channel value in the ATM header. The cell identification algorithm also allow complete freedom in assignment of VCI/VPI values. The reassembly processor uses a smart scatter method to write cell payload data to host memory. It maintains the scatter operation and controls the incoming DMA block during scatter DMA to host memory. The proposed reassembly processor can perform reassembly checks on AAL. OAM cell. For an AAL5 connection, only CPCS checks, including the CRC32, are performed. In this paper, we proposed a practical reassembly architecture. The design of reassembly processor has become feasible using 0.6${\mu}{\textrm}{m}$ CMOS gate array technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1096-1101
• /
• 2004

By a tremendous expansion of Internet users, there's a number effects that cause the phenomenon of bottlenecked switching packets from routers. In order to tear down this problem, distributed system is applicable to almost every highly performed router systems. The main processor of distributed system, which manages routing table, commands IPC to delivering the forwarding table line processor that eases functionalities of the router. This makes the system having wired-speed forwarding function based on the hardware so that the performance of the network can be enhanced. Therefore, IPC, which assign a part of router, is necessary to exchange data smoothly and the constitution of IPC using Ethernet is widely adapted as a method for saving investment. In this paper, R-IPC mechanism improve the packet-processing rate over 10% through changed from defect of conventional Ethernet IPC, that is, 2 layer processing to TCP/IP or UDP/ IP into 1 layer processing for efficient packet forwarding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.3-15
• /
• 2000

As an OLT in the central office controls up to 64 ONUs in the subscriber area via a passive optical splitter, the hU PON system can accomodate PTTx in a single platform with low cost. To operate the system, it is important to implement an efficient MAC protocol, however, the protocol is currently the further study area in the ITU-T 0.983.1. In this paper, we suggest the MAC protocol which is needed to send cells of ONU to upstream, and based on the ITU-T G.983.1. We survey conventional MAC protocols which are not based on G.983.1, and then formulate the minislot period and length for the grant request and determine the optimal value of each parameter. Also, we suggest a coding scheme for the grant field of the PLOAM cell and the procedure allocating optimal parameters to the ONU.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.143-150
• /
• 2009

High salt concentration is one of the most important limit factor on plant growth at a disused saltpan for golf course construction site. The control of salt in soil is definitely required and the monitoring of salt concentration in soil and ground water also required to amend soil physiochemical properties. This research was carried out to monitor the pH and salt concentration changes by the height of ground water. By the physiochemical analysis test, the soil contains a high salt concentration and classified as a slight alkaline clay soil. The height of ground water table changed to 1.3m, 3.3m and 2.8m at dry season(mid-late June, 2005), monsoon season(early-mid July) and after monsoon(late July), respectively. Compare to the average ground level of 2.9m, the ground water was over flooded about OAm at monsoon season. The electrical conductivity(ECe) was measured above $4.0dS{\cdot}m^{-1}$ over all areas and however, some areas showed over $20dS{\cdot}m^{-1}$. During a monsoon season, ECe was lowered to $1.2{\sim}15.0dS{\cdot}m^{-1}$, compared with those of the dry season. Therefore, the interception of the capillary connection between planting layer and ground water which contains high salt concentration should be adapted when golf courses are constructed on disused saltpan. The phytotoxicity caused by salt damage may be controled by the interception of capillary fringe of salt flow to the topsoil profile at the upper layer of the ground water table.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.357-365
• /
• 2006

The investigations were conducted to find out the situation of fertilizer use and the contents of soil chemical components on summer vegetable crops at 791 farmers' upland fields located in the parts of Gangwon-do, Gyengsangbuk-do and Jeollabuk-do of alpine area. Major vegetable crops were potato, Chinese cabbage, radish, carrot, onion, and cabbage. From the location surroundings cultivated alpine vegetable crops, the orders were Gangwon-do>Gyeongsangbuk-do>Jeollabuk-do part in the sizes of a fie1d area and the height above sea level, and Jeollabuk-do>Gyeongsangbuk-do>Gangwon-do part in the slope degrees. The soil texture was of wide distribution on sandy loam soil for Gangwon-do(76%) and Jeollabuk-do part(64%), and 1oam(42%) and sandy loam soil(35%) for Gyeongsangbuk-do part. From the numbers of investigated fields, the distribution of slope degree was wider than those of height above sea level in relation to location surroundings. The upland soils of 785 fields cultivated vegetable crops were sampled at 0~15 cm of top soil before seeding or transplanting and analyzed. On an average, pH, organic matter, available phosphate and exchangeable potassium, calcium, magnesium of soil were 5.7, $27.6g\;kg^{-1}$, $765mg\;kg^{-1}$, $1.16cmol_c\;kg^{-1}$, $6.1cmol_c\;kg^{-1}$, and $1.6cmol_c\;kg^{-1}$, respectively. The average cation exchange capacity(CEC) of 120 sites in Gangwon-do part was $9.2cmol_c\;kg^{-1}$. The content of organic matter, exchangeable potassium, exchangeable calcium and exchangeable magnesium was higher, while that of available phosphate was lower with slope degrees. And the content of major chemical components in carrot soil was lower in comparison with other crop soils. The average levels of N, $P_2O_5$, $K_2O$, livestock manure and lime fertilizer of 785 Belds applied by farmers were 335, 198, 244, 12,680 and $1,750kg\;ha^{-1}$, respectively, for summer vegetable crops in alpine area. The average amounts of $N-P_2O_5-K_2O$ fertilizers applied by farmers in 785 Gelds of vegetable crops were higher 1.7~2.0-4.2~7.0-1.4~2.0 times on potato, 1.4~1.6-4.6~8.3-3.5~4.2 times on Chinese cabbage, and 1.2~1.3-4.2~7.2-3.0~3.61 times on radish than the rates of NPK fertilizers based on soil testing for each crop.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2191-2205
• /
• 1971

In this research, Nong-rim No. 6 was adopted as a test variety of rice. Rice seedlings were transplanted on June 14, 1970. Roots were settled into soil on June 20 and a total number of days irrigated of $21cm{\times}21cm$ and an area of $9.9m^2$ for a test plot were accepted, planting 70 stumps of rice in a test plot. The soil in test plots are classified by soil test as oam, and its chemical contents are as shown in Table 3. Irrigation water was secured by pumping from the Sudun stream that originates at the Suho reservoir. Accordingly, the qualities of irrigation. water are considered to be the same as those of water stored in the Suho reservoir. There were 54 days of intermittent rainfalls in total during the whole 110-day period of irrigation. As a result, it is likely that the growth of rice plants was influenced by rainfall at a comparatively great degree. In order to measure the amounts of water consumption, infiltrometers, measuring devices for the decreases of water depths and lycimeters were provided. As a result of measurements, an average daily rate of infiltration was observed to be 14mm/day. It is expected from this research that the effect of increased yield will be secured by supplying optimum amounts of water for irrigation on proper times, and that the amounts of water consumption for irrigation can be saved by applying suitable irrigation methods. The test results obtained are summarized as follows: 1. Yields produced in the test plots of continuous irrigation are lower than those in the test plots of rotational irrigation, i.e., yields produced at the test plots irrigatied once in a period of 8 days are higher by 27% in average than those produced at test plots of continuous irrigation. 2. The amounts of irrigation water for test plots, which have a clay layer of 9cm in thickness and vynil diaphragm without holes, are saved by about 52% in comparison with ordinary test plots. 3. Ears are sprouted 5 days earlier at continuous irrigation plots as compared with other test plots. 4. It seems that there are growing stages of rice plants such as those of forming and sprouting of ears, in which the amounts of irrigation water are consumed more in comparison with the other stages. Therefore, it may be possible to increase of decrease the amount of irrigation water, according to the growing stage of rice plant, so as to save irrigation water.