• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.60-66
• /
• 2003

For the estimation of chatter lobe boundary it is very important to calculate the natural mode of cutting process. There are many time series algorithms for getting the natural mode of structural endmilling dynamics considering the cutting process. In this study, we have compared several time series methods such as AR algorithm, ARX, ARMAX, ARMA, Box Jenkins, Output Error, Recursive ARX, Recursive ARMAX considering the sampling frequency. As a results, the ARX, ARMAX and IV 4 are more desirable algorithms for the calculation of modal parameters such as natural frequency and damping ratio In endmilling operation. Also these algorithms may be adopted for the natural mode estimation of endmilling operation for chatter lobe prediction.

• 한국산업정보학회논문지
• /
• 제12권4호
• /
• pp.126-130
• /
• 2007

연속 반복되는 시스템에서 제어하는 제어기 repetitive controller를 설계하는 방법과 시스템 안정성을 소개하고자 한다. 제어기는 반복함수로서 수렴을 조장하는 비용함수를 주파수영역에서 최소화함으로써 유도할 수 있다. 모의실험은 제안된 단수모형설계 기법을 이용한 RC를 어떻게 유도하는 것을 보여 주고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2114-2116
• /
• 2001

Model reduction from high order systems to low order systems in frequency domain is considered four point (${\angle}$G(jw)=0, - ${\pi}/2$, ${\pi}$, and -3${\pi}$/2) instead of two point (${\angle}$G(jw) = - ${\pi}$/2,- ${\pi}$) of existing method in Nyquist curve. The Performances of reduced order model by proposed approach is similar to original model. In this paper, we proposed a new tuning algorithm for PID controller using model reduction in frequency domain. Simulations for some examples with varies dynamic characteristics are provided to show the effectiveness of the proposed tuning algorithm for PID controller using model reduction.

• ETRI Journal
• /
• 제46권2호
• /
• pp.238-249
• /
• 2024

Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.457-462
• /
• 2018

The purpose of this study was to compare image quality of indirect digital radiography (IDR) system using the International Electro-technical Commission standard (IEC 62220-1), and to suggest the analysis of noise power spectrum (NPS) which were applied to IEC 62220-1 in medical imaging. In this study, Pixium 4600 (Trixell, France) which is indirect flat panel detector (FPD) was used. The size of image receptor (IR) is $7{\times}17$ inch (matrix $3001{\times}3001$) which performed 14bit processing and pixel pitch is $143{\mu}m$. In IEC standard, NPS evaluation were applied to RQA3, RQA5, RQA7 and RQA9. Because of different radiation quality, each region of interesting (ROI) were compared. The results of NPS indicated up to $3.5mm^{-1}$ including low Nyquist frequency. RQA5 indicated the lowest NPS and the others indicated higher NPS results relatively. NPS result of ROI a38 was higher than ROI a92 and this result indicated that there are more noise in left (cathode) than right (anode). This study were to evaluate NPS by using different radiation quality and setting the each ROI, and to suggest the quantitative methods of measuring NPS.

• 전자공학회논문지S
• /
• 제35S권10호
• /
• pp.11-18
• /
• 1998

최소대역폭 성질을 만족하고, 직류 성분을 지니고, 상태 독립적인 부호화 및 복호화가 가능한 2진 선로부호 MB46d BUDA 셀 기법을 응용하여 설계하였다. 설계된 선로부호 MB46d는 하나의 상태만 존재하므로 앞 상태에 무관하게 부호화할 수 있으며 데이터 메모리 용량이나 하드웨어가 간단하다. 또한, 최대 연속장이 8로 제한되어 있으므로, 수신 측에서 시각 정보를 많이 가져 자체 동기 기능을 가지며, 복호화 규칙이 매우 간단하며, 임펄스 응답 함수가 Raised cosine pulse인 시스템에서 최악의 경우에도 눈 모양이 크게 열려있으므로 어느 정도의 샘플링 지터가 존재하더라도 오류 없는 수신이 가능하다. 제안된 2진 선로부호 MB46d는 직류 성분성질을 제한하지 않은 반면에 고주파 성분을 더욱 억압하여 캐리어 파일럿 삽입 시 데이터 스펙트럼과 파일럿 사이의 간섭을 최소화 할 수 있다는 장점도 가지고 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.390-394
• /
• 1999

본 논문에서는 twisted-pair 채널특성을 이용하여 가우스 및 원단누화 잡음환경에서의 디지털가입 자라인의 BER 성능평가를 Semi-analytic 시뮬레이션 방법에 의해 수행하였다. 그 결과로서 감쇄가 없는 경우의 시뮬레이션 결과는 이론치보다 E$^{b}$ /N$^{0}$ 면에서 0.5dB 이내의 열화를 보석 시뮬레이션의 타당성을 보인다. 전송거리가 5000m로 길어지면 BER=l0$^{-7}$ 에서 E$^{b}$ /N$^{0}$ 는 약 4dB, 일정거리에서 나이퀴스트 주파수가 512kb/s로 높아지면 약 2dB 정도 열화한다. 또한 원단누화 잡음에 의한 영향은 전송거리면에 있어서는 원단누화 잡음 감쇄정수 k=$10^{-10}$ 이상일 때, 나이귀스트 주파수면에서는 k=$10^{-14}$ 이상일 때 크게 나타난다. 본 해석의 결과는 향후 국내외 디지털가입자라인의 표준화 제정에 기본적인 데이터로 활용될 수 있을 것이다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.351-356
• /
• 2001

In this paper, a general one-loop control system was assumed as a model system which has a time-delay element connected with a first order-lag element in series. After the corresponding parameter set causing stability limit condition for the model system was obtained by mathematical procedures, their loci on the parameter space was taken according of frequency change,. The parameter set loci of stability limit showed a specific pattern, and particularly the curves on the Kp-Ti parameter space were able to generalized in the form of an exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2014년도 하계학술대회
• /
• pp.230-231
• /
• 2014

Compressive sensing is a new sampling technique, which allows to sample a signal under the Nyquist-Shannon sampling rate. For block-based compressive sensing, a hybrid sensing matrix which contains low-frequency patterns in addition to the random Gaussian numbers is good for exploiting typical property of natural images. By noting that MH-BCS-SPL is well known for its good recovery performance, this paper investigates effect of the hybrid sensing matrix on MH-BCS-SPL in the sense of how large portion of low-frequency patterns can provide performance improvement.