• 제목/요약/키워드: Numerical series

검색결과 1,586건 처리시간 0.026초

1g 진동대 실험을 이용한 연약 점성토 지반에서의 동적 p-y 곡선 연구 (A Study on the Dynamic p-y Curves in Soft Clay by 1 g Shaking Table Tests)

  • 한진태;유민택;최정인;김명모
    • 한국지반공학회논문집
    • /
    • 제26권8호
    • /
    • pp.67-75
    • /
    • 2010
  • 본 연구에서는 연약 점성토 지반에 근입된 모형말뚝을 대상으로 다양한 입력 가속도 크기 및 진동수 조건에서 1g 진동대 실험을 수행하였다. 실험 결과를 이용하여, 각각의 동적 p-y 곡선을 산정하였으며, 이 p-y 곡선 상에서 최대지반반력이 나타나는 꼭지점들을 연결하여 연약 점성토의 동적 p-y 중추곡선(Backbone curve)을 쌍곡선 함수로 나타내었다. 이 쌍곡선 함수를 정의하는데 필요한 초기 기울기와 극한 저항력은 Matlock의 p-y 곡선 공식을 이용하여 제안하였다. 새로 제안한 동적 p-y 중추곡선은 실제 내진설계에 사용되고 있는 정적 p-y 곡선과 다른 연구자들의 원심모형실험 결과 및 수치해석 결과와 비교하여 검증하였다.

탄-점성 압밀이론에 의한 버티칼 드레인 타설지반의 잔류침하 예측 (I) -이론의 적용성 검증 (Prediction of Residual Settlement of Ground Improved by Vertical Drains Using the Elasto-Viscous Consolidation Model (I) - Verification of the Applicability of Theory -)

  • 백원진
    • 한국지반공학회논문집
    • /
    • 제23권4호
    • /
    • pp.69-77
    • /
    • 2007
  • 본 연구에서는 정규압밀 및 과압밀상태의 구별없이 이차압밀 거동을 표현할 수 있는 3차원 탄-점성압밀이론에 의한 유한차분해석에 의해 버티칼 드레인으로 개량된 점성토 지반의 압밀지동을 해석하였다. 또한, 탄-접성압밀이론의 적용성에 대해 버티칼 드레인 타설지반의 모형실험결과와 비교하여 검토하였다. 이들 실험결과로부터, 과잉간극수압이 거의 소산된 상태에서의 버티칼 드레인 개량지반에서의 침하량은 1차원 조건에 비해 적으며, 이차압밀과정에서의 잔류침하량 및 침하속도는 1차원 조건보다 크게 나타남을 알았다. 마지막으로, 압밀과정의 거동에 대한 토질정수의 영향을 정규압밀 및 과압밀 상태에 대한 일련의 수치해석의 결과에 의해 조사하였다.

지오그리드 감쌈 쇄석기둥 공법의 장.단기 하중 지지 특성 - 유한요소해석을 통한 고찰 (Short- and Long-term Load Carrying Capacity of Geogrid-encased Stone Column - A numerical investigation)

  • 이대영;소아란;김선빈;유충식
    • 한국지반공학회논문집
    • /
    • 제23권8호
    • /
    • pp.5-16
    • /
    • 2007
  • 유럽 등지에서 연약지반 개량 또는 제방기초로서 적용되는 쇄석기둥 공법은 일반적인 파일기초의 대안공법으로 경제성 및 시공성 측면에서 효율적이며, 액상화 방지에도 효과가 있는 것으로 알려져 있다. 또한 최근 들어서는 더욱 발전된 형태의 지오그리드 보강 쇄석기둥 공법에 관한 연구가 활발히 진행되고 있는 실정이다. 이와 관련하여 본 논문에서는 지오그리드 보강 쇄석기둥 공법의 성토하중에 대한 쇄석기둥의 하중지지 특성을 고찰하기 위해 2차원 유한요소해석을 수행하였고, 지오그리드 보강효과, 지오그리드 강성, 지오그리드 감쌈깊이 등 영향인자에 대한 매개변수 연구를 수행하였다. 해석결과로부터 지오그리드 보강은 쇄석기둥 공법의 장 단기 하중지지 특성 개선시켜 주는 것으로 나타났다.

지반의 공간적 변동성을 고려한 확률론적 해석기법에 관한 연구 (A Study on the Probabilistic Analysis Method Considering Spatial Variability of Soil Properties)

  • 조성은;박형춘
    • 한국지반공학회논문집
    • /
    • 제24권8호
    • /
    • pp.111-123
    • /
    • 2008
  • 지반공학 문제는 많은 불확실한 요인을 내포한다. 이러한 불확실성 중 일부는 해석 수행과정에 필요한 지반 물성의 변동성과 관련이 있다. 본 연구에서는 지반물성의 공간적 변동성을 고려한 확률론적 해석을 수행할 수 있는 절차를 제시하였다. 제시된 방법은 유한차분 해석기법과 랜덤필드 이론을 확률론적 해석기법에 통합하게 된다. 지정된 입력 확률분포함수와 자기상관함수를 따르는 non-Gaussian 랜덤필드를 생성하기 위하여 Karhunen-$Lo{\grave{e}}ve$ 전개법을 사용하였다. 생성된 랜덤필드를 이용하여 확률론적 응답을 얻기 위해 Monte Carlo 시뮬레이션을 수행하였다. 지반의 공간적인 변동성에 기인하는 불확실성의 효과를 연구하기 위하여 대상 기초의 침하량과 지지력에 대한 일련의 해석을 수행하였다. 해석결과는 지반공학 문제에서 불확실성을 고려할 수 있는 관점을 제시하며 확률론적 평가의 결과에 미치는 지반물성의 공간적 변동성의 중요성을 보여준다.

저속 충격 하중을 받은 탄소섬유강화 복합재 압력용기의 잔류강도 저하 평가 (Evaluation of Residual Strength of CFRP Pressure Vessel After Low Velocity Impact)

  • 박재범;김동륜;김형근;황태경
    • Composites Research
    • /
    • 제21권3호
    • /
    • pp.9-17
    • /
    • 2008
  • 본 논문에서는 저속충격하중을 받은 필라멘트 와인딩 탄소섬유강화 복합재 압력용기의 잔류강도 저하특성에 대한 수치해석 및 실험결과에 대해서 논한다. 복합재 압력용기의 원통부의 여러 곳에 대해 낙하 공구의 끝단을 모사한 삼각형 충격자를 사용한 저속 충격시험이 실시되었고, 유한요소해석을 수행하여 충격시의 기계적 변형 및 응력분포 거동에 대한 예측을 실시하였다. 충격하중을 받은 복합재 압력용기의 잔류강도 저하 특성을 정량적으로 평가하기 위해, 충격부위를 포함하는 원환시편을 압력용기의 실린더부로부터 채취하여, 원주방향 내압인장강도 측정 수압시험법으로부터, 원환시편의 수압파열 압력을 측정하였다. 결과적으로 본 연구를 통해 충격 에너지의 수준에 따른 잔류강도 변화가 성공적으로 계측되었으며, 복합재 압력용기의 충격손상허용을 정량적으로 평가하기 위한 유용한 방법론이 정립되었다.

우측 상지 소력감을 주소로 하는 특발성 다발신경병증 남환 치험 1례 (A Case of Idiopathic Polyneuropathy with Right Upper Limb Weakness)

  • 이상화;신희연;이형민;정혜선;조승연;박성욱;박정미;고창남;양승보
    • 대한중풍순환신경학회지
    • /
    • 제19권1호
    • /
    • pp.55-62
    • /
    • 2018
  • A patient with right upper limb weakness was diagnosed with idiopathic polyneuropathy and received a series of Korean Medicine including acupuncture, electroacupuncture, bee venom acupuncture, and administration of herbal medicine BacJung-hwan for 17 days of hospitalization period. The progression of the weakness was measured by Hand grip tester, neuralgia and numbness were measured by the NRS(Numerical Rating Scale) scores. After treatment, the right grip strength improved from 12kg to 35kg and the right upper limb neuralgia of the NRS5 was improved to NRS2. The present case study suggests that the potential effects of Korean Medicine treatment for idiopathic polyneuropathy.

  • PDF

Impact of soft and stiff soil interlayers on the pile group dynamic response under lateral harmonic load

  • Masoud Oulapour;Sam Esfandiari;Mohammad M. Olapour
    • Geomechanics and Engineering
    • /
    • 재33권6호
    • /
    • pp.583-596
    • /
    • 2023
  • The interlayers, either softer or stiffer than the surrounding layers, are usually overlooked during field investigation due to the small thickness. They may be neglected through the analysis process for simplicity. However, they may significantly affect the dynamic behavior of the soil-foundation system. In this study, a series of 3D finite-element Direct-solution steady-state harmonic analyses were carried out using ABAQUS/CAE software to investigate the impacts of interlayers on the dynamic response of a cast in place pile group subjected to horizontal harmonic load. The experimental data of a 3×2 pile group testing was used to verify the numerical modeling. The effects of thickness, depth, and shear modulus of the interlayers on the dynamic response of the pile group are investigated. The simulations were conducted on both stiff and soft soils. It was found that the soft interlayers affect the frequency-amplitude curve of the system only in frequencies higher than 70% of the resonant frequency of the base soil. While, the effect of stiff interlayer in soft base soil started at frequency of 35% of the resonant frequency of the base soil. Also, it was observed that a shallow stiff interlayer increased the resonant amplitude by 11%, while a deep one only increased the resonant frequency by 7%. Moreover, a shallow soft interlayer increased the resonant frequency by 20% in soft base soils, whereas, it had an effect as low as 6% on resonant amplitude. Also, the results showed that deep soft interlayers increased the resonant amplitude by 17 to 20% in both soft and stiff base soils due to a reduction in lateral support of the piles. In the cases of deep thick, soft interlayers, the resonant frequency reduced significantly, i.e., 16 to 20%. It was found that the stiff interlayers were most effective on the amplitude and frequency of the pile group.

3D 프린터를 이용한 선단 모양 변화에 따른 타입말뚝 거동 연구 (Study on the Effect of Pile Tip Shape on Driven Pile Behavior Using 3D Printers)

  • 김도현
    • 한국지반공학회논문집
    • /
    • 제39권1호
    • /
    • pp.27-38
    • /
    • 2023
  • 본 연구에서는 3D 프린팅 기술을 활용하여 타입말뚝 선단의 모양에 따른 관입성 분석을 현장 축소모형시험을 통해 관찰하고, 대변형 수치해석을 통해 타입 중 말뚝 선단에 집중되는 최대응력의 변화를 확인하였다. 3D 프린터를 통하여 다양한 직경, 각도 그리고 모양의 말뚝 선단 모형을 제작하였고, 이를 현장 축소모형시험에 활용하였다. 이를 통해, 말뚝 선단 조건에 따른 말뚝의 침하량의 변화를 관찰하였다. 더 나아가, 대변형 수치해석 기법을 적용하여 다양한 말뚝 선단 조건에 따른 타입 중 말뚝 선단부의 최대응력의 변화와 최대응력 작용 위치 또한 확인하였다. 현장 축소모형시험과 대변형 수치해석의 결과 분석을 토대로 말뚝 선단 조건의 변화를 통해 타입말뚝의 관입성을 향상 시킬 수 있으며 선단부에 집중되는 최대응력 또한 완화 시켜 말뚝 시공 중 말뚝 손상을 방지할 수 있을 것으로 결론지을 수 있었다.

Validation of model-based adaptive control method for real-time hybrid simulation

  • Xizhan Ning;Wei Huang;Guoshan Xu;Zhen Wang;Lichang Zheng
    • Smart Structures and Systems
    • /
    • 제31권3호
    • /
    • pp.259-273
    • /
    • 2023
  • Real-time hybrid simulation (RTHS) is an effective experimental technique for structural dynamic assessment. However, time delay causes displacement de-synchronization at the interface between the numerical and physical substructures, negatively affecting the accuracy and stability of RTHS. To this end, the authors have proposed a model-based adaptive control strategy with a Kalman filter (MAC-KF). In the proposed method, the time delay is mainly mitigated by a parameterized feedforward controller, which is designed using the discrete inverse model of the control plant and adjusted using the KF based on the displacement command and measurement. A feedback controller is employed to improve the robustness of the controller. The objective of this study is to further validate the power of dealing with a nonlinear control plant and to investigate the potential challenges of the proposed method through actual experiments. In particular, the effect of the order of the feedforward controller on tracking performance was numerically investigated using a nonlinear control plant; a series of actual RTHS of a frame structure equipped with a magnetorheological damper was performed using the proposed method. The findings reveal significant improvement in tracking accuracy, demonstrating that the proposed method effectively suppresses the time delay in RTHS. In addition, the parameters of the control plant are timely updated, indicating that it is feasible to estimate the control plant parameter by KF. The order of the feedforward controller has a limited effect on the control performance of the MAC-KF method, and the feedback controller is beneficial to promote the accuracy of RTHS.

이상 탐지를 위한 시스템콜 시퀀스 임베딩 접근 방식 비교 (Comparison of System Call Sequence Embedding Approaches for Anomaly Detection)

  • 이근섭;박경선;김강석
    • 융합정보논문지
    • /
    • 제12권2호
    • /
    • pp.47-53
    • /
    • 2022
  • 최근 지능화된 보안 패러다임의 변화에 따라, 다양한 정보보안 시스템에서 발생하는 각종 정보를 인공지능 기반 이상탐지에 적용하기 위한 연구가 증가하고 있다. 따라서 본 연구는 로그와 같은 시계열 데이터를 수치형 특성인 벡터로 변환하기 위하여 딥러닝 기반 Word2Vec 모델의 CBOW와 Skip-gram 추론 방식과 동시발생 빈도 기반 통계 방식을 사용하여 공개된 ADFA 시스템콜 데이터에 대하여, 벡터의 차원, 시퀀스 길이 및 윈도우 사이즈를 고려한 다양한 임베딩 벡터로의 변환에 대한 실험을 진행하였다. 또한 임베딩 모델로 생성된 벡터를 입력으로 하는 GRU 기반 이상 탐지 모델을 통해 탐지 성능뿐만 아니라 사용된 임베딩 방법들의 성능을 비교 평가하였다. 통계 모델에 비해 추론 기반 모델인 Skip-gram이 특정 윈도우 사이즈나 시퀀스 길이에 치우침 없이 좀 더 안정되게(stable) 성능을 유지하여, 시퀀스 데이터의 각 이벤트들을 임베딩 벡터로 만드는데 더 효과적임을 확인하였다.