• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.205-206
• /
• 2006

The microstructural evolutions and shear properties of the pure Sn solder bumps with Ni UBMs were investigated during multiple reflows and high temperature storage(HTS) tests. Only a $Ni_3Sn_4$ IMC was found at the bump/Ni UBM interface after 1 reflow. The layer thickness of these IMCs increased with increasing reflow number and testing time. The solder bumps showed a good reliability during multiple reflows and HTS tests.

• Communications for Statistical Applications and Methods
• /
• v.23 no.6
• /
• pp.587-592
• /
• 2016

It is a long-standing issue to correctly determine the number of long-run relationships among time series processes. We revisit nonparametric test for cointegration rank and propose bootstrap refinements. Consistent with model-free nature of the tests, we make use of Cholesky factor bootstrap methods, which require weak conditions for data generating processes. Simulation studies show that the original Breitung's test have difficulty in obtaining the correct size due to dependence in cointegrated errors. Our proposed bootstrapped tests considerably mitigate size distortions and represent a complementary approach to other bootstrap refinements, including sieve methods.

• Geomechanics and Engineering
• /
• v.19 no.4
• /
• pp.329-342
• /
• 2019

In this paper, the effect of a group of sand columns in the loose soil bed using triaxial tests was studied. To investigate the effect of geotextile reinforcement type on the bearing capacity of these sand columns, Vertical encased sand columns (VESCs) and horizontally reinforced sand columns (HRSCs) were used. Number of sixteen independent triaxial tests and finite element simulation were performed on specimens with a diameter of 100 mm and a height of 200 mm. Specimens were reinforced by either a single sand column or three sand columns with the same area replacement ratio (16%) to evaluate the Influence of the column arrangement. Effect the number of sand columns, the length of vertical encasement and the number of horizontal reinforcing layers were investigated, in terms of bearing capacity improvement and economy. The results indicated that the ultimate bearing capacity of the samples with three ordinary sand columns (OSCs) is eventually about 11% more than samples with an OSC. Also, comparison of the column reinforcing modes showed that four horizontal layers of geotextile achieved similar performance to a vertical encasement geotextile at the 50% of the column height, from the viewpoint of strength improvement, while from the viewpoint of economy, the geotextile needed for encasing the single column is around 2.5 times of the geotextile required for four layers.

• Health Policy and Management
• /
• v.23 no.2
• /
• pp.145-151
• /
• 2013

Background: The objective of this study was to explore patient family's evaluation of emergency department (ED) service satisfaction and to compare these with ED staff perception of patient family's evaluation. Methods: Based on two surveys of the National Emergency Medical Center: the 2008 National Survey for Recognition and Satisfaction towards Emergency Medical Services and the 2008 Opinion Survey of Emergency Medical Service Providers, satisfaction gaps among physicians, nurses, and patient family were evaluated by Kruskal-Wallis tests and Wilcoxon-Mann-Whitney tests. Furthermore, the factors associated with satisfaction of emergency medical service were identified by ordinal logistic regression models. Results: There were statistically significant gaps among physicians, nurses, and patient family in overall satisfaction with ED visit, length of stay in ED, enough explanation, physicians/nurses kindness, and ED facilities. Age and income in the patient family model, the number of beds in hospital, job satisfaction and year of service in the physicians model, and the number of beds in hospital, job satisfaction and the number of patients per duty hour in the nurses model were statistically significant factors associated with evaluation/ perception of ED service satisfaction. Conclusion: Patient satisfaction is an important indicator of the quality of care and service delivery in the ED. To improve and understand satisfaction in ED service, a dyadic view of the evaluation of service quality and satisfaction-that is, from the perspectives of both the patient and the emergency medical service providers-should be concerned.

• Wind and Structures
• /
• v.11 no.4
• /
• pp.303-321
• /
• 2008

When first commissioned, the 1.6 km span 275kV Severn Crossing Conductor experienced large amplitude vibrations in certain wind conditions, but without ice or rain, leading to flashover between the conductor phases. Wind tunnel tests undertaken at the time identified a major factor was the lift generated in the critical Reynolds number range in skew winds. Despite this insight, and although a practical solution was found by wrapping the cable to change the aerodynamic profile, there remained some uncertainty as to the detailed excitation mechanism. Recent work to address the problem of dry inclined cable galloping on cable-stayed bridges has led to a generalised quasi-steady galloping formulation, including effects of the 3D geometry and changes in the static force coefficients in the critical Reynolds number range. This generalised formulation has been applied to the case of the Severn Crossing Conductor, using data of the static drag and lift coefficients on a section of the stranded cable, from the original wind tunnel tests. Time history analysis has then been used to calculate the amplitudes of steady state vibrations for comparison with the full scale observations. Good agreement has been obtained between the analysis and the site observations, giving increased confidence in the applicability of the generalised galloping formulation and providing insight into the mechanism of galloping of yawed and stranded cables. Application to other cable geometries is also discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.569-577
• /
• 2009

As the scale factor of model propellers utilized in cavitation test is about 40, it is difficult to find out practical countermeasures against the small area erosions on the blade tip region throughout model erosion tests. In this study, a partial propeller blade model was used for the observation of cavitation pattern for the eroded propeller. A partial propeller blade model was manufactured from 0.7R to tip with expanded profile and with adjustable device of angle of attack. Reynold's number of a partial propeller blade model is 7 times larger than that of a model propeller. Also, anti-singing edge and application of countermeasures to partial propeller blade model which produced in large scale can be more practical than a model propeller. For the observation of cavitation at high Reynold's number, high speed cavitation tunnel was used. To find out the most severe erosive blade position during a revolution, cavitation observation tests were carried out at 5 blade angle positions.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.867-873
• /
• 2011

A navigation mesh (NavMesh) is a suitable tool for the representation of a three-dimensional game world. A NavMesh consists of convex polygons covering free space, so the path can be found reliably without detecting collision with obstacles. The main disadvantage of a NavMesh is the huge state space. When the $A^*$ algorithm is applied to polygonal meshes for detailed terrain representation, the pathfinding can be inefficient due to the many states to be searched. In this paper, we propose a method to reduce the number of states searched by using visibility tests to achieve fast searching even on a detailed terrain with a large number of polygons. Our algorithm finds the visible vertices of the obstacles from the critical states and uses the heuristic function of $A^*$, defined as the distance to the goal through such visible vertices. The results show that the number of searched states can be substantially reduced compared to the $A^*$ search with a straight-line distance heuristic.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.571-579
• /
• 2007

This study was conducted to qualify the equality of the flow distribution from open channel between rapid mixing basin and flocculation basins in a domestic full-scale water treatment plant, and suggest a remedy for improving the equality. In order to evaluate the feasibility of the suggested remedy, computational fluid dynamics (CFD) technique are used, and for verifying the CFD simulation results wet tests were carried out for the pilot scale channel based on geometric similarity. From the results of CFD simulation and wet tests, it was investigated that the modification of hydraulic structure in the distribution channel, which is to install the longitudinal orifice baffle in flow direction, could improve the equality of the flow distribution. Also, in the case that Froude number is relatively small (Froude number <<0.03), the open ratio of orifices on the installed baffle hardly affects the equality of flow distribution.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1094-1100
• /
• 1998

The thermal fatigue behavior of alumina ceramics was investigated by water quenching method. Single-quench thermal shock tests were performed to decide the critical thermal shock temperature difference ($\Delta$Tc) which was found to be 225$^{\circ}C$ Cyclic thermal shock fatigue tests were performed at temperature diff-erences of 175$^{\circ}C$, 187$^{\circ}C$ and 200$^{\circ}C$ respectively. After cyclic thermal shock fatigue test the distributions of retained strength and crack were observed. Retained strength was measured by four point bending method and crack observation method bydye penetration. In terms of the retained strength distribution the critical number of thermal shock cycles(Nc) were 7 for $\Delta$T=200$^{\circ}C$, 35 for $\Delta$T=187$^{\circ}C$ and 180for $\Delta$T=175$^{\circ}C$ respec-tively. In terms of the crack observation the critical number of thermal shock cycles were 5 for $\Delta$T==200$^{\circ}C$ 20 for $\Delta$T==187$^{\circ}C$ and 150 for $\Delta$T=175$^{\circ}C$ respectively. The difference of Nc investigated by two different methods is due to the formation of the longitudinal cracks which had no effect on the four point bending strength. Therefore the thermal fatigue behavior of alumina ceramics could be more accurately described by the crack observation method than the retained strength measurement method.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.1 s.21
• /
• pp.56-66
• /
• 1987

Information on productivity of hospital personnel is required for optimum staffing and hospital management. This study deals with the quantitative aspects of workload of medical personnel in training hospitals by their specific characteristics. Specifically this study attempted to find relevant determinants of the productivity of medical personnel using multiple stepwise regression analysis based on data obtained from 135 training hospitals. The findings of this study were as follows: 1) Daily average number of outpatients and inpatients treated by a physician were 20.4 and 10.2, respectively. 2) Daily average number of patients cared by a nurse was 8.2. Daily average number of tests performed by pathologic technician and radiologic technician were 83.2 and 21.5, respectively. 3) Productivity of medical personnel were significantly different for the three groups of factors: hospital sire (number of beds, number of medical personnel per 100 beds): institutional characteristics (medical school affiliation, training type, profit status); and environmental factors (location, number of physician and beds per 1,000 population in the region). 4) The factors a(footing the productivity varied according to the types of medical profession: the number if beds, the number of physicians per 100 beds, training type, and profit status for physicians; the number of nurses per 100 beds, the number of beds, medical school affiliation for nurses; the number of physicians per 100 beds, the number of technicians per 100 beds, and ownership for pathologic technicians; the number o( technicians, training type, and the number of physicians per 100 beds for radiologic technician.