• Journal of the Korean Society of Safety
• /
• v.18 no.1
• /
• pp.33-37
• /
• 2003

The objective of the present work is to examine the variation of cooling characteristics due to the Weber number of droplet on a heated surface. The surface temperatures varied from 72.5 - $106.1^{\circ}C$ on steel and Teflon, when Weber number was 60, 180, 300. The results are as follows; In the case of the same droplet size, the initial temperature of solid increases the indepth temperature of solid more drop. In the case of the same surface temperature, Weber number increases with increasing the cooling effect of droplet. The time-average heat flux increases with increasing the initial temperature of solid and Weber number. The evaporation time decreases with increasing the initial temperature of solid and Weber number.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.210-219
• /
• 2000

When an electronic control system has been used for long time, the electronic control system becomes obsolete and no longer In production. In this case, the existing control system should replace by new system due to shortage of spare modules. However, if the proper number of spare modules are stocked, it may be possible and more economical than to replace by new system to extend the usage period of the existing control system. In this case, it is an important problem to determine the proper number of spare modules. In this paper, a method to determine the proper number of spare modules is presented with an application example.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1807-1816
• /
• 2020

In this work, a Gaussian Process (Kriging) approach is proposed to provide efficient dose mapping for complex radiation fields using limited number of responses. Given a few response measurements (or simulation data points), the proposed approach can help the analyst in completing a map of the radiation dose field with a 95% confidence interval, efficiently. Two case studies are used to validate the proposed approach. The First case study is based on experimental dose measurements to build the dose map in a radiation field induced by a D-D neutron generator. The second, is a simulation case study where the proposed approach is used to mimic Monte Carlo dose predictions in the radiation field using a limited number of MCNP simulations. Given the low computational cost of constructing Gaussian Process (GP) models, results indicate that the GP model can reasonably map the dose in the radiation field given a limited number of data measurements. Both case studies are performed on the nuclear engineering radiation laboratories at the University of Sharjah.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.303-309
• /
• 2006

This study intended to compare and analyze marking efficiencies of basic slacks, based on different cloth and production conditions, the width of cloth, the number of marking pieces and the direction for marking deployment and proposed an efficient marking method. The results were as follows. On the whole, the marking efficiencies increased with increasing cloth widths. In the case of small number of marking pieces, the efficiency increased with increasing cloth widths, while, for large number of marking pieces, there was no differences in the efficiency with the cloth widths. From the result of the comparison of the marking efficiencies with the number of marking pieces, it was shown that, in the case of small cloth width, the efficiency increased considerably with increasing number of marking pieces, while, in the case of large cloth width over two markers, there was no distinct effect of the number of markers on the marking efficiency. Thought there were some differences of the marking efficiencies with the marker directions, bi-direction marker was the most efficient marker, followed by one-direction for each size marker and one-direction marker.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.259-269
• /
• 2017

This study analyzed medical aid case management effects based on the number of access by visits, phone calls, letters, internal investigation, resource links, and requests, in medical aid case management business that is carried out to improve the quality of life of medical care beneficiaries and reduce financial cost. Secondary analysis study using data of 564 high-risk group in the medical aid case management and their healthcare utilization data. Letters had positive correlations with the scores of all case management domains. The higher visits was, the lower the score of self-health care ability was, and the higher the number of phone calls was, the higher the score for reasonable medical use was. While there was no significant difference in medical cost according to aid management by interventions, the higher visits and resource links were, the lower the subjects' total number of payment days was. There is a difference in the various areas of the quality of health -related life and medical use depending on case management by intervention method and its number. It is necessary to carry out the efficient number of access to case management by intervention method.

• Journal of Korea Water Resources Association
• /
• v.53 no.5
• /
• pp.347-356
• /
• 2020

The main objective of the study is to propose the most efficient SWAT model calibration method using SWAT-CUP with less computing time and high performance. In order to achieve the goal, Case1-3 (250, 500, and 1,000 simulation runs) and Case4 (1,000 simulation runs in the first iteration and then 500 simulation runs for the following iterations) were defined to compare the results. When evaluating the values of the objective function, Case2 and Case3 reached the same value after the fourth iteration, and Case1 reached the closed value of Case2-3 after the eighth iteration. However, the final estimates of the parameters had different ranges in Cases1-3, and only the results of Case3 and Case4 converged similarly. Thus, it can be considered that the parameter calibration results are highly affected by the initial number of simulation runs. On the other hand, SWAT simulation results did not show the significant difference after the first iteration, unlike the parameter ranges. From the analysis results, we can conclude that the most suitable and effective method was to repeat one or two times of iterations with a sufficient number of simulation runs, as in Case4.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.1999-2010
• /
• 2023

Undesirable flapping motion of discs can cause the failure of swing check valves in nuclear passive safety systems. Time-resolved particle image velocimetry (PIV) was employed to investigate the flow characteristics around a free-to-rotate plate and the motion response, with the Reynolds numbers, based on the hydraulic diameter of the channel, from 1.32 × 10⁴ to 3.95 × 10⁴. Appreciable flapping motion (±3.52°) appeared at the Reynolds number of 2.6 × 10⁴ with the frequency of 5.08 Hz. In the low-Reynolds-number case, the plate showed negligible flapping. In the high-Reynolds-number case, the deflection angle increased with reduced flapping amplitude. The torque from the fluid determined the flapping amplitude. In the low-Reynolds-number case, Karman vortices were absent. With increasing Reynolds numbers, Karman vortices developed behind the plate with larger deflection angles. Strong interaction between the wake flow from the leading and trailing edge of the plate was observed. Based on power spectrum density (PSD) analysis, the vortex shedding frequency coincided with the flapping frequency, and the amplitude was positively correlated to the strength of the vortices. Proper orthogonal decomposition (POD) modes evince that, in the case of appreciable motion, coherent structures exhibited a larger spatial scale, enhancing the magnitude of the external torque on the plate.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.477-480
• /
• 2000

Open Shortest Path First(OSPF) is a dynamic, hierarchical routing protocol designed to support routing in TCP/IP networks. Currently, OSPF is used as Interior Gateway Protocol(IGP) in many routers. In this paper, we analyze the variation of number of OSPF routing packets in case of changing the network configuration. The results show that the number of packets in case of adding new link increase five times than one in case of normal operation.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.1
• /
• pp.195-214
• /
• 2017

The standardized algorithm of natural number multiplication simplify the procedure of arithmetic. In the case of multiplication algorithm with regrouping, we write small the carrying number on the multiplicand. But, teachers and students have to make their own way about the case of two digits multipliers, because Korean elementary mathematics textbooks just deal with the case of the one digit multipliers. In this study, we investigated Korean current elementary mathematics textbooks related to multiplication algorithm with regrouping, and analyzed the result of research on the real condition about marking the carrying number. Besides, we reviewed the guidance contents of algorithm of natural number multiplication in Finland's math textbook and literature. By conclusions, we suggest several implications as followed; First, we need some examples of the way to mark the carrying number in teacher's guidance books and textbooks. Second, teachers try for students to feel the good points of the systematic ways to mark the carrying number. Third, teachers understand algorithm of natural number multiplication and the alternative ways about marking the carrying number.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2E
• /
• pp.26-30
• /
• 1998

In this paper, we compose neural network predictive HMM(NNPHMM) to provide the dynamic feature of the speech pattern for the HMM. The NNPHMM is the hybrid network of neura network and the HMM. The NNPHMM trained to predict the future vector, varies each time. It is used instead of the mean vector in the HMM. In the experiment, we compared the recognition abilities of the one hundred Korean syllables according to the variation of hidden layer, state number and prediction orders of the NNPHMM. The hidden layer of NNPHMM increased from 10 dimensions to 30 dimensions, the state number increased from 4 to 6 and the prediction orders increased from 10 dimensions to 30 dimension, the state number increased from 4 to 6 and the prediction orders increased from the second oder to the fourth order. The NNPHMM in the experiment is composed of multi-layer perceptron with one hidden layer and CMHMM. As a result of the experiment, the case of prediction order is the second, the average recognition rate increased 3.5% when the state number is changed from 4 to 5. The case of prediction order is the third, the recognition rate increased 4.0%, and the case of prediction order is fourth, the recognition rate increased 3.2%. But the recognition rate decreased when the state number is changed from 5 to 6.