• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.175-184
• /
• 2009

The study analyzes likely impacts of left truck lane restriction strategies on urban freeways based on a traffic simulation model. This study contains two main parts. The first part is performed to develop feasible alternatives as well as provide insights into conditions under left truck lane restrictions would be effective based on the analysis of two representative hypothetical highways. Different levels of O-D demands and truck percentage is at least restrictions would work when maximum rate of flow is more than 1,300vphpl or truck percentage is at least over loft of the total traffic. The second part of our study concerns a case study on a region with perhaps the highest truck volumes in the U.S. - a northbound section of Interstate 710 corridor in Los Angeles County, Southern California. The results show that restricting the two leftmost lanes under congested traffic with heavy ruck use, provides the most positive impacts in terms of improving the flow of traffic and saving fuel. In addition, our study demonstrates that in general, the number of lanes restricted is a crucial factor in the success of this strategy.

• 전자공학회논문지 IE
• /
• v.46 no.1
• /
• pp.31-36
• /
• 2009

This study was to simulate it that the sending receiving vehicles run on the general national roads with the one-way two-lanes at 80[km/h] speed. This study was to select 280[m] radius of curvature based on the statistical data with high rate of traffic accidents, 140[m] length of direct roads considering the stopping stadia, 90[m] length of curve, and 8 points of curved roads at 11.25[m] intervals. As a result above, when the distance between the sending and receiving vehicles became more than 111[m], the propagation path of reflected wave by the adjacent vehicles became longer than the propagation path of reflected wave by the left/right reflectors because the number of repeated reflection increased. In this study, the repeated reflection for the propagation's reach to the receiving vehicles was about $1{\sim}2$[times] as it supposed it less than 111[m]. Accordingly, it found out that the propagation path of reflected wave received through the left/right reflectors was about $1{\sim}1.5[m]$ larger than the reflected wave produced by the adjacent vehicles regardless of lanes on which the sending and receiving vehicles were located.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.1-13
• /
• 2015

This study aims to develop a mainline metering strategy considering queue imbalance among lanes that can reduce congestion at a toll plaza section by managing queue caused by mainline metering. The suggested strategy considers simultaneously optimizing the number of cars in merging area and managing queue by lane. This study analyzes the effectiveness of the strategy with respect to the average travel time and the occurrence rate of spillback using the PARAMICS. The results show that the suggested strategy has an effect on reducing congestion and improving operation efficiency at toll plaza. In particular, the congestion become more intensified when the length of waiting space is shorter; however, this study shows that the suggested strategy can relieve the congestion in that condition.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.101-108
• /
• 2012

This study deals with the traffic accidents of circular intersections in Korea. The goal of this study is to develop the traffic accident models using ZAM. The main results are as follows. First, in the case of 'violating the operational method of intersection', ZINB(zero-inflatednegative binomial) models were analyzed to be the best fit to the data. Second, in the case of' no maintaining the safe distance', ZINB models were also analyzed to be the best fit to the data. Finally, such the common variables as traffic volume and width of circular roadway were selected as the independent variables. The more traffic volume and the less width of circulatory roadway were evaluated to make the more accidents. Such the specific variables as the number of approach lanes and speed reduction facilities were selected as the explanatory variables. The more approach lanes and the less speed reduction facilities were evaluated to give the more accidents. This study might be expected to give some implications to the accident research on the circular intersections.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.167-174
• /
• 2011

This research was conducted to propose the design methodologies of post-tensioned concrete pavements (PTCPs) for specialized section pavements. The specialized sections considered in this study included bus stop sections in urban bus-only lanes and culvert existing highway sections that often showed severe failures. The PTCP designs of those specialized sections were performed based on both the stresses and the fatigue failures, and more conservative design results were selected. In the stress based design, the maximum tensile stress under extreme load conditions was obtained using finite element analyses first. Then, the number of tendons and the tendon spacing were determined so that the tensile stress was less than the allowable flexural strength. The AASHTO fatigue failure equations were used in the fatigue failure based design. From this study, the design methodologies of PTCP for bus stop sections in bus-only lanes and culvert existing highway sections were successfully suggested.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.73-84
• /
• 2001

Korean Highway Capacity Manual applies 7 adjustment factors to estimate saturation flows at signalized intersections. Among the adjustment factors, the right-turn adjustment factor uses equation hard to understand and requires complicated computing process comparing other adjustment factors. Thus. this study was conducted in order to suggest a new technique of estimating the right-turn adjustment factor which is easy to understand and simple to computer by having reasonable degree of accuracy. In this study the right-turn saturation flow ratios which are important in estimating the factor are suggested and the equation to estimate the volume of right-turn on red signal(RTOR) is developed based on observed data. The right-turn saturation flow rates can be estimated according to turning radius and number of lanes of crossing road dividing right-turn lanes into canalized and uncanalized lanes. The RTOR volume is estimated using the proportion of the time during which RTOR is possible to the whole time of red signal according to the through traffic volume per lane of the approach at signalized intersections. The technique of estimating the right-turn adjustment factor suggested in this study, which follows the HCM2000 of U.S. in principal, first judges the right-turn lane to be used exclusively for right-turn or not by employing the RTOR factor and the judging equation developed in this study. Next, if the right-turn lane is not exclusive right-turn lane, the shared right-turn lane is classified into single lane approach or multi lane approach. Thus, a total of three methods of estimating the right-turn adjustment factor to the three cases are suggested in this study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.30-44
• /
• 2020

The application of PPLT is difficult to analyze and judge only from the effects of the delay time. In this study, the application of PPLT was proposed using not only the delay time of PLT and PPLT due to the change in traffic volume and the number of opposite straight lanes but also the traffic volume of passing a left turn and the number of conflict risks as indicators. According to the analysis, the more left-turn traffic than capacity and the less opposite-straight volume, the greater the PPLT effect. On the other hand, if the left-turn traffic is below capacity, the delay time will be reduced partially, but the overall passing left turn volume will not increase, and the conflict risk will increase. In addition, the conflict risk increases in the third lane or higher. Moreover, the difference of passing left-turn volume between PLT and PPLT showed a pattern similar to the delay time difference, and the PPLT coverage was wider than the difference in delay time and was associated more with the conflict risk numbers. Therefore, it would be reasonable to use passing left-turn traffic primarily, consider the delay time below the left-turn capacity, and consider the conflicting risk numbers simultaneously at or above the opposite straight three lanes.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.709-717
• /
• 2004

The existing AASHTO Standard Specification have some inadequacies in expressing wheel load distribution of bridge which has specific shape of curved bridge instead of straight bridge. Thus, this research presented the finite element analysis and modelling technique of prestressed concrete girder bridge having curved slab and the expression of wheel load distribution was suggested as the ratio of bending moment utilizing the result of finite element analysis of prestressed concrete girder bridge having cowed slab. The considered parameter of girder distribution expression is the curvature of slab, span length, girder space, cross beam space and number of lanes. Though the suggested girder distribution expression is generally underestimated below AASHTO Standard Specification, once the curvature of slab increases, the suggested expression gets larger than AASHTO LRFD Standard Specification.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.177-184
• /
• 2002

The concrete median barriers are the most popular safety appurtenances that can be installed on narrow medians and are effective in keeping uncontrolled vehicles from crossing into opposing lanes of traffic. It is necessary to install and maintain median barriers because it is very difficult to reserve enough room required for medians in KOREA. And concrete median barriers are accepted as the actual alternatives for median barriers, mostly because they require almost no maintenance even after serious collisions. Typical concrete median barriers are 810mm high and have 596mm high glare screens on top of them. But we have experienced a number of “climb” and “roll-over” accidents of heavy vehicles until now, and most of all, there have been some serious accidents caused by the part of broken glare screens. We have performed many computer simulations for the evaluation of the crashworthiness of concrete median barriers, and through the simulations we have tried to find a proper type of concrete median barrier.

• Journal of information and communication convergence engineering
• /
• v.17 no.2
• /
• pp.142-148
• /
• 2019

Relatively few countries provide separate bicycle lanes for cyclists. Hence, tools for suggesting cycling routes are essential for a safe and pleasant cycling experience. This study aims to develop a mobile application to build cycling routes based on user preferences, specifically location, search radius, ride distance, and number of optimal routes. Our application calls the Strava API to retrieve Strava cycling segments crowdsourced from the cycling community. Then, it creates a graph consisting of the start and end points of these segments. Beginning from a user-specified location, the depth-first search algorithm (DFS) is applied to find routes that conform to the user's preferences. Next, a set of optimal routes is obtained by computing a trade-off ratio for every discovered route. This ratio is calculated from the lengths of all segments and the lengths of all connecting paths. The connected routes can be displayed on a map on an Android device or exported as a GPX file to a bike computer. Future work must be performed to improve the design of the user interface and user experience.