• 유공압시스템학회논문집
• /
• 제1권2호
• /
• pp.1-7
• /
• 2004

In-process diagnosis is essential to achieve predictive maintenance in industrial plants. An in- process diagnosis method was proposed for hydraulic servo systems, which was based upon leakage flow measurement. Leakage due to servovalve wear was analysed and modeled mathematically far computer simulation work. The key idea of diagnosis algorithm is that when monitoring signals, such as servovalve input and load displacement are in steady states, the return-line flow of hydraulic servo systems can be regarded as null-leakage of servovalve. Virtual experiments were performed to ensure effectiveness of the proposed diagnosis method.

• 한국산업정보학회논문지
• /
• 제18권5호
• /
• pp.59-65
• /
• 2013

저전력 설계를 요구하는 디지털 시스템에서는 동적 전력(dynamic power)과 누설 전력(leakage power) 사이의 균형을 이루는 점에 근접하는 매우 낮은 전압에서 작동하는 디지털 설계 방식을 요구하지만, 기존의 동기방식의 회로는 낮은 전압에서 지연(delay)이 급격히 증가하여 시스템의 전체 성능을 유지할 수 없을 뿐만 아니라, 공정, 전압, 온도 변이 (PVT variation) 등에 크게 영향을 받아서 올바른 동작을 기대할 수 없다. 따라서 본 논문에서는 낮은 전압에서 여러 가지 변이들에 영향을 받지 않는 비동기회로 설계 방식 중에 타이밍 분석이 요구되지 않고, 설계가 간단한 NCL (Null Convention Logic) 방식을 사용한 저전력 산술논리 연산장치 (ALU) 회로를 매그나칩-SK하이닉스 0.18um 공정으로 설계하고, 기존의 파이프라인 방식의 ALU와 스피드와 전력에 관해서 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.343-347
• /
• 2004

High oxidation temperature of SiC shows a tendency of carbide formation at the interface which results in poor MOSFET transfer characteristics. Thus we developed oxidation processes in order to get low interface charge densities. N-type 6H-SiC MOS capacitors were fabricated by different oxidation processes: dry, wet, and dry­reoxidation. Gate oxidation and Ar anneal temperature was $1150^{\circ}C.$ Ar annealing was performed after gate oxidation for 30 minutes. Dry-reoxidation condition was $950^{\circ}C,$ H2O ambient for 2 hours. Gate oxide thickness of dry, wet and dry-reoxidation samples were 38.0 nm, 38.7 nm, 38.5 nm, respectively. Mo was adopted for gate electrode. To investigate quality of these gate oxide films, high frequency C- V measurement, gate oxide leakage current, and interface trapped charge densities (Dit) were measured. The interface trapped charge densities (Dit) measured by conductance method was about $4\times10^{10}[cm^{-1}eV^{-1}]$ for dry and wet oxidation, the lowest ever reported, and $1\times10^{11}[cm^{-1}eV^{-1}]$ for dry-reoxidation

• 한국통신학회논문지
• /
• 제41권8호
• /
• pp.859-867
• /
• 2016

GPS(Global Positioning System)는 미국에서 군사목적으로 이용하기 위해 개발된 위치측정 시스템으로, 현재는 우리나라를 포함한 각 국에서 군용뿐만 아니라 민간에도 유용하게 쓰이고 있다. 하지만 GPS는 위성으로부터 지면에 도달하는 신호의 세기가 매우 약해서 전파방해신호(Jamming Signal)에 약하다는 단점을 가진다. 본 논문에서는 수신된 GPS 신호에 협대역의 전파방해 신호가 존재한다고 가정하고, 새로운 협대역 전파방해신호 제거 알고리즘을 제안한다. 우선, GPS 수신기에서 수신한 신호를 FFT를 이용하여 주파수 성분으로 표현하며, FFT로 인하여 발생하는 Spectral Leakage의 영향을 줄이기 위하여 Blackman-Harris window를 적용한다. Blackman-Harris window의 주파수 응답을 형태를 이용하여, 가장 큰 파워를 가지는 주파수 성분을 찾고 그 주변으로 일정한 개수의 성분을 제거하는 알고리즘을 제안하였다. 주로 쓰일만한 128~512포인트의 FFT를 사용할 시에 고정적으로 최대값 주변의 42개의 성분을 제거하는 것이 가장 최적임을 알 수 있었다.

• 한국산업정보학회논문지
• /
• 제21권1호
• /
• pp.17-25
• /
• 2016

본 논문은 동기회로에서 누설 전류를 줄이기 위해서 사용되는 파워 스위치 구조를 결합한 새로운 구조의 저전력 비동기 회로 설계 방법을 제안하고자 한다. Static 방식, Semi-static 방식과 같은 기존의 지연 무관방식의 비동기 방식과 비교해서 다소 속도의 손해는 있지만, 파워 스위치에 의해서 데이터가 없는 상태에서는 누설 전력을 줄일 수 있고, 전체 사이즈가 작아짐으로써 데이터가 입력되는 순간의 스위칭 전력도 줄일 수 있는 장점이 있다. 따라서, 제안된 방법은 속도보다 저전력을 기본으로 하는 사물인터넷 시스템에서 요구되는 전전력 설계 방법이 될 것이다. 본 논문에서는 새로운 방식의 비동기 회로를 사용하여 $4{\times}4$곱셈기를 0.11um 공정으로 설계하고, 기존의 비동기 방식의 곱셈기와 스피드, 누설 전류, 스위칭 파워, 회로 크기 등을 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.967-973
• /
• 2004

Electro-pneumatic servo valve is an electro-mechanical device which converts electric signals into a proper pneumatic flow rate or pressure. In order to improve the overall performance of pneumatic servo systems, electro-pneumatic servo valves are required, which have fast dynamic characteristics, no air leakage at a null point, and can be fabricated at a low-cost. The first objective of this research is to design and to fabricate a new electro-pneumatic servo valve which satisfies the above-mentioned requirements. In order to design the mechanism of the servo valve optimally, the flow inside the valve depending upon the position of spool was analyzed variously, and on the basis of such analysis results, the valve mechanism, which was formed by combination of the spool and the sleeve, was designed and manufactured. And a tester for conducting an overall performance test was designed and manufactured, and as a result of conducting the flow rate test, the pressure test and the frequency test on the developed pneumatic servo valve.

• 연구논문집
• /
• 통권34호
• /
• pp.69-77
• /
• 2004

Electro-pneumatic servo valve is an electro-mechanical device which converts electric signals into a proper pneumatic flow rate or pressure. In order to improve the overall performance of pneumatic servo systems, electro-pneumatic servo valves are required, which have fast dynamic characteristics, no air leakage at a null point, and can be fabricated at a low-cost. The objective of this research is to design and to fabricate a new electro-pneumatic servo valve which satisfies the above-mentioned requirements. In order to design the mechanism of the servo valve optimally, the flow inside the valve depending upon the position of spool was analyzed variously, and on the basis of such analysis results, the valve mechanism, which was formed by combination of the spool and the sleeve, was designed and manufactured. Further, the performance of pneumatic servo valve has been verified through an overall performance test on the developed product.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1210-1214
• /
• 2008

Electro-pneumatic servo valve is an electro-mechanical device which converts electric signal into pneumatic flow rate or pressure. In order to improve the overall performance of pneumatic servo systems, electro-pneumatic servo valves are required, which have fast dynamic characteristic, no air leakage at null, and can be fabricated at a low-cost. The first objective of this research is to design and fabricate a new electro-pneumatic servo valve which satisfies the above-mentioned requirements. In this paper, we has been modeled as a system consisting of coupled electro-mechanic and mechanical subsystems. The appropriateness of the model has been verified by simulation. The simulation model resolves the valve body motion and the solenoid current at high accuracy. Also, we are calculate the displacement of spool and computed results show winding currents, magnetic actuator force, flux density line, displacement, velocity, back EMF, eddy current etc.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.699-705
• /
• 2008

Capacitance versus voltage (C-V) characteristics of Ge-nanocrystal (NC)-embedded metal-oxide-semiconductor (MOS) capacitors with $HfO_2$ gate material were investigated in this work. The current versus voltage (I-V) curves obtained from Ge-NC-embedded MOS capacitors fabricated with the $NH_3$ annealed $HfO_2$ gate material reveal the reduction of leakage current, compared with those of MOS capacitors fabricated with the $O_2$ annealed $HfO_2$ gate material. The C-V curves of the Ge-NC-embedded MOS capacitor with $HfO_2$ gate material annealed in $NH_3$ ambient exhibit counterclockwise hysteresis loop of about 3.45 V memory window when bias voltage was varied from -10 to + 10 V. The observed hysteresis loop indicates the presence of charge storages in the Ge NCs caused by the Fowler-Nordheim (F-N) tunneling. In addition, capacitance versus time characteristics of Ge-NC-embedded MOS capacitors with $HfO_2$ gate material were analyzed to investigate their retention property.

• Biomolecules & Therapeutics
• /
• 제30권1호
• /
• pp.98-116
• /
• 2022

The small GTPase RhoA has been studied extensively for its role in actin dynamics. In this study, multiple bioinformatics tools were applied cooperatively to the microarray dataset GSE64714 to explore previously unidentified functions of RhoA. Comparative gene expression analysis revealed 545 differentially expressed genes in RhoA-null cells versus controls. Gene set enrichment analysis (GSEA) was conducted with three gene set collections: (1) the hallmark, (2) the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway, and (3) the Gene Ontology Biological Process. GSEA results showed that RhoA is related strongly to diverse pathways: cell cycle/growth, DNA repair, metabolism, keratinization, response to fungus, and vesicular transport. These functions were verified by heatmap analysis, KEGG pathway diagramming, and direct acyclic graphing. The use of multiple gene set collections restricted the leakage of information extracted. However, gene sets from individual collections are heterogenous in gene element composition, number, and the contextual meaning embraced in names. Indeed, there was a limit to deriving functions with high accuracy and reliability simply from gene set names. The comparison of multiple gene set collections showed that although the gene sets had similar names, the gene elements were extremely heterogeneous. Thus, the type of collection chosen and the analytical context influence the interpretation of GSEA results. Nonetheless, the analyses of multiple collections made it possible to derive robust and consistent function identifications. This study confirmed several well-described roles of RhoA and revealed less explored functions, suggesting future research directions.