• 물과 미래
• /
• 제28권2호
• /
• pp.145-154
• /
• 1995

강우량 자료들을 수공계획에 적절히 사용하기 위해서는 강우량에 대한 다양한 해석기법이 필요하다. 본 연구에서는 연속강우량에 따른 강우사상계열의 수문빈도해석을 위한 확률분포를 연구한 것이다. 2변량 정규분포, 2변량 대수정규분포, 2변량 gamma 분포가 강릉, 서울, 인천, 추풍령, 대구, 전주, 광주, 부산지점의 연속최대 강우량과 그 지속기간으로 이루어진 강우사상의 확률분포로서 적용되었다. 이들 지점의 강우사상 자료가 2변량 정규분포, 2변량 대수정규분포에는 적합되었으나 2변량 gamma 분포에는 적합되지 않았다. 적합도 검정을 통하여 선정된 최적 분포형으로부터 확률강우사상의 빈도곡선을 제시하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.479-483
• /
• 2004

A new calculation method of expected overtopping probability of rubble mound breakwater considering real tide occurrence has been proposed. A calculation method of expected overtopping probability of rubble mound breakwater was proposed by Kweon and Suh (2003). In their calculation, the fluctuation of tidal elevation was expressed by the sinusoidal change that yields the uniform distribution of occurrence frequency. However, the realistic distribution of tidal elevation should influence on the overtopping chance. In this study, the occurrence frequency of tidal elevation obtained from the real sea is included. The tidal elevation used in this study is collected from the east coastal part of Korean peninsular. Analyzing the annual data of the tidal fluctuation measured hourly during 355 days, the distribution of occurrence frequency is formulated utilizing by the normal distribution with one peak. Among the calculation procedures of annual maximum wave height, wave height-period joint distribution, wave run-up height and occurrence frequency of tide, only the annual maximum wave height is again chosen randomly from normal distribution to consider the uncertainty. The others are treated by utilizing the distribution function or relationship itself, It is found that the inclusion of the variability of tidal elevation has great influence on the computation of the expected overtopping probability of rubble mound breakwater. The bigger standard deviation of occurrence frequency is, the lower the overtopping probability of rubble mound breakwater is.

• 천문학회보
• /
• 제38권1호
• /
• pp.34.2-34.2
• /
• 2013

Spin distribution of dark matter halos in a cosmological N-body simulation is well fitted by a log-normal distribution, but the origin of the log-normal like shape is still unknown. To understand the evolution of spin and the origin of spin distribution, we have studied the change of the angular momentum of simulated halos through their merging histories. First, we traced merging histories of the dark matter halos and measured the probability distribution of the angular momentum changes from a series of simulations. We were able to fit the angular momentum changes with the Gaussian distribution in spaces of M, spin, ${\Delta}M$. Using the simulated merging trees and the distribution of angular momentum changes during the merging events, we can recover the spin distribution of halos over the various mass scales.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.86-93
• /
• 2013

This paper deals with the effects of driving force and material properties on statistical distribution of fatigue crack growth rate (FCGR) for the friction stir welded joints of Al 7075-T651 aluminum plate. In this work, the statistical probability distribution of fatigue crack growth rate was analyzed by using our previous constant stress intensity factor range controlled fatigue crack growth test data. As far as this study are concerned, the statistical probability distribution of fatigue crack growth rate for the friction stir welded (FSWed) joints was found to evaluate the variability of fatigue crack growth rate for base metal (BM), heat affected zone (HAZ) and weld metal (WM) specimens. The probability distribution of fatigue crack growth rate for FSWed joints was found to follow well log-normal distribution. The shape parameter of BM and HAZ was decreased with increasing the driving force, however, the shape parameter of WM was decreased and increased with increasing the driving force. The scale parameter of BM, HAZ and WM was increased with the driving force.

• 기술사
• /
• 제21권4호
• /
• pp.19-32
• /
• 1988

Whereas is non-symmetrical distribution manufacturing process the traditional X-chart by Shewhart is not plotted relatively on the central line but plotted on the skew of upper-hand side or lower-hand side. That is to say, for the purpose of producing either upper-specification-oriented items or lower-specification-oriented items, and when we carry out tighter control so as to have them pass only its specifications, the distribution shape naturally has a non-normal distribution. In the Shewhart X-chart, which is the most widely used one in Korea, such skewed distributions make tile plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such short comings is non-normally distributed processes, a distribution-free type of confidence interval can be used, which should be haled on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for non-normal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, and Truncated-normal distributions, may be easily analyzed. To enhance this improvement, I proved the property of practical applications of control chart method by comparing and analyzing the case studies of practical application of special purpose control chart method, and also by introducing the new designed median control chart.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1123-1128
• /
• 2009

The refrigerant R-134a flow distributions are experimentally studied for a round header/ten flat tube test section simulating a brazed aluminum heat exchanger. Three different inlet orientations (parallel, normal, vertical) were investigated. Tests were conducted with downward flow for the mass flux from 70 to $130\;kg/m^2s$ and quality from 0.2 to 0.6. In the test section, tubes were flush-mounted with no protrusion into the header. It is shown that normal and vertical inlet yielded approximately similar flow distribution. At high mass fluxes or high qualities, however, slightly better results were obtained for normal inlet configuration. The flow distribution was worst for the parallel inlet configuration. Possible explanation is provided based on flow visualization results.

• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1280-1289
• /
• 2005

This paper presents the effects of corrosion environments of failure pressure model for buried pipelines on failure prediction by using a failure probability. The FORM (first order reliability method) is used in order to estimate the failure probability in the buried pipelines with corrosion defects. The effects of varying distribution types of random variables such as normal, lognormal and Weibull distributions on the failure probability of buried pipelines are systematically investigated. It is found that the failure probability for the MB31G model is larger than that for the B31G model. And the failure probability is estimated as the largest for the Weibull distribution and the smallest for the normal distribution. The effect of data scattering in corrosion environments on failure probability is also investigated and it is recognized that the scattering of wall thickness and yield strength of pipeline affects the failure probability significantly. The normalized margin is defined and estimated. Furthermore, the normalized margin is used to predict the failure probability using the fitting lines between failure probability and normalized margin.

• 대한치료과학회지
• /
• 제10권2호
• /
• pp.5-11
• /
• 2018

Objective: The purpose of the present study is to investigate whether intensive ankle training using biofeedback to increase proprioceptive senses and ankle-joint muscle strength effectively improves the balance of normal adults. Method: This study included 20 voluntary participants with normal adults. The subjects were randomly divided into 2 groups: the biofeedback intensive ankle training group (n=10) and the ankle training group (n=10). The biofeedback group used a visual biofeedback program. Subjects of the group that underwent ankle training only tried to keep their bodies balanced as well as possible on an Aero-Step. Both groups performed the exercise equally for three 30-minute sessions weekly for six weeks. The differences between the measurements before and after the experiment were analyzed using Wilcoxon signed-rank tests. Mann-Whitney U tests were used to analyze the differences in variations between the groups. Results: The biofeedback group showed significant differences in the weight distributions A, B, C, D, LEFT, and HEEL and on the weight-distribution index. In contrast, the ankle training group showed significant differences in the weight distributions A, C, and LEFT. A comparison of the differences between the two groups found significant differences between them in the weight distributions A, B, C, D, LEFT, and HEEL. Conclusion: The biofeedback group showed a greater ability to control weight distribution. A longer experimental period involving more subjects would aid in developing exercise programs that are more diverse.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.869-878
• /
• 2007

In this paper a new process capability index $C_{psks}$ is introduced for non-normal process. $C_{psks}$ that is proposed by transformation of the $C_{psks}$ incorporates an additional skewness correction factor in the denominator of $C_{psks}$. The use of each technique is illustrated by reference to a distribution system which includes the Pearson and Johnson functions. Accordingly, $C_{psks}$ is proposed as the process capability measure for non-normal process.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.937-943
• /
• 2007

In this paper a new process incapability index $C^*_{psks}$ is introduced for non-normal process. $C^*_{psks}$ is proposed by transformation of the $C^*_{psks}$. The use of each technique is illustrated by reference to a distribution system which includes the Pearson and Johnson functions. Accordingly, $C^*_{psks}$ is proposed as the process capability measures for non-normal process.