• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.399-402
• /
• 1999

In this paper, a new method for calculating capacitance in arbitrarily shape structure is Presented. This new approach based on divergence theorem of Gauss\`s law is acheive by Surface-Contacted Element(SCE) for Gaussian surface. To evaluate accurate capacitance value in nonuniform electric field. in two dimensional analysis the interpolation using the elements which contact one nod (PE: Point-Element) or two nod (FE: Face-Element) is employed. Because the elements contacted with surface are very small compared with total elements in analytic model, SCE method has shorter computing time to calculate capacitance. This proposed method is verified by comparing the simulated results with value obtained by analytic method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1999-2001
• /
• 2000

Impulse breakdown voltage characteristics of sulphur-hexafluoride/nitrogen ($SF_{6}-N_{2}$) mixtures were presented. The applied voltages were the positive and negative lightning impulse (1.2/44${\mu}s$) and oscillating impulse ($0.4{\mu}s$/2.08MHz) voltages. The predischarge current was observed to clarify the breakdown mechanism. The electrode system was consisted of plane to plane configuration with a needle-shaped protrusion whose length and diameter are 10mm and 1mm. The measurements were carried out at the gas pressure of mixtures up to 0.5MPa with nitrogen concentrations varying from 5 to 20%. The electrical breakdown in $SF_{6}-N_{2}$ mixtures develops with steplike pulses in leader mechanism. The minimum breakdown voltages for the negative lightning and oscillating impulse voltages were higher than those for the positive.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1390-1392
• /
• 2000

In this paper, a numerical calculation method based on CSM has been described. The electric field must be nonuniform even close to railway feed system. In that case, to calculate induced voltage, this paper uses the mutual capacitances between a conductor and railway feed system. The induced voltages of a conductor located at point (height=4m, distance=8m) near by railway feed system are calculated from 370V to 668V.

• Journal of the Optical Society of Korea
• /
• 제6권3호
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.200-206
• /
• 2000

We have investigated the activation magnetic moment, which characterizes the basis magnetic moment acting as a single magnetic particle during magnetization reversal. The activation magnetic moment was measured from each local area on continuous ferromagnetic thin films, by analyzing the magnetic field dependence of magnetization reversal of the corresponding local area based on a thermally activated relaxation process. It was found that the activation magnetic moment was nonuniform on submicrometer scale; the fluctuation increased with increasing the number of layers in Co/Pd multilayers. The distribution could be well analyzed by exp($\delta$m$\^$3/2/), where $\delta$m is the deviation of the activation magnetic moment from the mean value.

• Journal of Magnetics
• /
• 제6권2호
• /
• pp.70-72
• /
• 2001

We have investigated the activation magnetic moment, which characterizes the basic magnetic moment acting as a single magnetic particle during magnetization reversal. The activation magnetic moment was measured from each local area on continuous ferromagnetic thin films, by analyzing the magnetic field dependence of magnetization reversal of the corresponding local area, based on a thermally activated relaxation process. It was found that the activation magnetic moment was nonuniform on a submicrometer scale; the fluctuation increased with increasing the number of layers in Co/Pd multilayers. The distribution could be well described by exp($\delta m^{3/2}$), where $\delta$m is the deviation of the activation magnetic moment from the mean value.

• ETRI Journal
• /
• 제7권4호
• /
• pp.3-10
• /
• 1985

비간섭성 LED 광원으로 부터의 빛이 다중모우드 광섬유를 약 10km이상 지났을 때 광의 입사조건에 무관하게 정상상태(Steady-state) 에 이르며, 정상상태의 광섬유 출사단의 near-field 광 파워 분포가 가우시안(Gaussian) 함수 형태임을 알 수 있었다. 이 가우시안 함수형태의 정상상태에서 측정된 광섬유의 손실은 매우 안정된 측정치를 나타내었다. 한편 가간섭성 LD광원을 사용할 경우 10km까지 near-field광 파워 분포에서 스페클(Speckle) 현상을 볼 수 있었고, LD의 간섭성과 발광 모우드 형태의 불균일로 인하여 20km 이상까지 LED에서와 같은 정상상태에 이르지 않고 있었으나 이 상태에서 측정된 광섬유의 손실치는 비교적 안정하였다.

• 한국전자파학회지:전자파기술
• /
• 제2권3호
• /
• pp.17-25
• /
• 1991

자기부상열차 시스템에서의 자속 누설은 주로 부상용 전자석과 리니어 모터, 안내용 전자석으로 부터 발생하 여 intra - system 및 inter - system EMI 현상과 biological effect을 야기할 수 있다. 본 논문에서는 누설 자속의 크기에 영향을 주는 각종 요소들을 고려하여 열차 주위에 분포하는 자기장의 세기를 계산하였으며, 여기서 얻어진 결과를 이용하여 차제 바닥과 측면에 사용되는 구조물의 재질과 위치에 따른 최소 두께를 계산하여 자기장 차폐를 위해 차체 무게가 증대되는 것을 최소로 할 수 있는 방법을 제시하였다. 이 결과를 한국해사기술연구소에서 설계제작한 2인승 자기부상열차 모형에 적용하여 열차 모형 주위의 자속 밀도에 대한 등자위선을 구하고, 이때의 최소 차폐 두께를 제시함으로써 차폐 재료의 무게에 대해 50% 이상의 감량이 가능하였다.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.169-177
• /
• 2017

The role of electromagnetic (EM) waves in magnetic fusion plasma-ranging from radio frequency (RF) to microwaves-has been extremely important, and understanding of EM wave propagation and related technology in this field has significantly advanced magnetic fusion plasma research. Auxiliary heating and current drive systems, aided by various forms of high-power RF and microwave sources, have contributed to achieving the required steady-state operation of plasmas with high temperatures (i.e., up to approximately 10 keV; 1 eV=10000 K) that are suitable for future fusion reactors. Here, various resonance values and cut-off characteristics of wave propagation in plasmas with a nonuniform magnetic field are used to optimize the efficiency of heating and current drive systems. In diagnostic applications, passive emissions and active sources in this frequency range are used to measure plasma parameters and dynamics; in particular, measurements of electron cyclotron emissions (ECEs) provide profile information regarding electron temperature. Recent developments in state-of-the-art 2D microwave imaging systems that measure fluctuations in electron temperature and density are largely based on ECE. The scattering process, phase delays, reflection/diffraction, and the polarization of actively launched EM waves provide us with the physics of magnetohydrodynamic instabilities and transport physics.

• 한국지반신소재학회논문집
• /
• 제5권4호
• /
• pp.49-58
• /
• 2006

근래에 들어, 복합 라이너 시스템에서 점토차수재를 대신하여 GCL(Geosynthetic clay liner)의 사용이 급증하고 있다. 그러나, 과연 GCL의 수리학적 특성이 점토차수재와 대등하게 매립장 설계규준을 만족 시키는가의 여부는 오래동안 논란이 되어왔다. 실내시험 및 현장조사 결과 여러 가지 원인에 의해 GCL에 응력집중이나 비등방 분포 하중이 생길 때 국부적인 벤토나이트 유실로 팽윤된 GCL의 두께가 감소할 수 있음을 보여준다. 이 논문에서는 현장조사를 통하여 실내시험에서 얻어진 벤토나이트 유실을 확인하고 감소된 GCL 두께에 대한 수리학적 특성을 분석했다.