• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.366-369
• /
• 1994

In this paper, reduced-order $H_{\infty}$ robust controller is designed for the drum-type boiler system. From the known nonlinear dynamic model, a linearized multivariable model is obtained. To reduce order of robust controller, observer-based proper $H_{\infty}$ compensator is designed. The designed controller has robust property against the influence of sensor noise, system parameter variation and model uncertainty. A good Performance of the designed controller is shown by simulation.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.107-114
• /
• 2023

A new intelligent adaptive control scheme was proposed that combines observer disturbance-based adaptive control and fuzzy adaptive control for a composite structure with a mass-adjustable damper. The most important advantage is that the control structures do not need to know the uncertainty limits and the interference effect is eliminated. Three adjustable parameters in LMI are used to control the gain of the 2D fuzzy control. Binary performance indices with weighted matrices are constructed to separately evaluate validation and training performance using the revalidation learning function. Determining the appropriate weight matrix balances control and learning efficiency and prevents large gains in control. It is proved that the stability of the control system can be ensured by a linear matrix theory of equality based on Lyapunov's theory. Simulation results show that the multilevel simulation approach combines accuracy with high computational efficiency. The M-TMD system, by slightly reducing critical joint load amplitudes, can significantly improve the overall response of an uncontrolled structure.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.867-872
• /
• 2022

부하의 영향은 전동기의 정밀한 속도조절에 있어서 중요한 요소이다. 본 연구에서는 수학적 모델로 용이하지 않은 부하 및 수학적 모델의 오차와 비선형항을 포함하는 외란을 하나의 상태로 정의하고, 이를 추정할 수 있는 상태 관측기를 설계한다. 그리고 상태 관측의 추정오차가 0으로 수렴할 수 있도록 관측이득을 설정하고, 추정된 상태를 백스텝핑 제어기에 사용하여 정밀한 속도 추종이 가능한 제어기를 설계한다. 1 [hw] 급의 매입형 영구자석 동기전동기에 적용한 결과 우수한 상태관측과 추종 성능을 확인할 수 있다.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.43-51
• /
• 2021

A robust tracking controller design was developed for a rotary motion control system. The friction force versus the angular velocity was measured and modeled as a combination of linear and nonlinear components. By adding a model-based friction compensator to a nominal proportional-integral-derivative controller, it was possible to build a simulated control system model that agreed well with the experimental results. A zero-phase error tracking controller was selected as the feedforward tracking controller and implemented based on the estimated closed-loop transfer function. To provide robustness against external disturbances and modeling uncertainties, a disturbance observer was added in the position feedback loop. The performance improvement of the overall tracking controller structure was verified through simulations and experiments.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.145-154
• /
• 2023

In this study, to control the heading angle of a ship, which is constantly subjected to various internal and external disturbances during the voyage, an LADRC (linear active disturbance rejection control) design that focuses more on improving the disturbance removal performance was proposed. The speed rate of change of the ship's heading angle due to the turn of the rudder angle was selected as a significant factor, and the nonlinear model of the ship's maneuvering equation, including the steering gear, was treated as a total disturbance. It is the similar process with an LADRC design for the first-order transfer function model. At this time, the gains of the controller included in LADRC and the gains of the extended state observer were tuned to RCGAs (real-coded genetic algorithms) to minimize the integral time-weighted absolute error as an evaluation function. The simulation was performed by applying the proposed GA-LADRC controller to the heading angle control of the Mariner class vessel. In particular, it was confirmed that the proposed controller satisfactorily maintains and follows the set course even when the disturbances such as nonlinearity, modelling error, uncertainty and noise of the measurement sensor are considered.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.228-235
• /
• 2010

본 논문에서는 틸트로터 항공기의 회전익 모드에 대한 자율비행 유도제어 알고리즘을 적응제어기법을 이용하여 설계하는 것이다. 이를 위해 우선 출력기반 근사적 궤환선형화 기법을 통하여 알고리즘의 내부루프를 구성하고 그로부터 발생하는 모델오차를 단일 은닉층-신경망을 적용하여 상쇄하였다. 그리고 리아푸노프 안정성 이론에 따른 적응제어 갱신법칙은 선형 관측기를 기반으로 설계하였다. 나아가 외부루프는 경로점 유도법칙으로부터 생성되는 궤적을 추종하도록 하였으며 특히 엄밀한 자동착륙 궤적추종 성능 향상을 위하여 방향각 및 비행경로각 시선유도법칙을 설계하였다. 틸트로터 비선형 모델 시뮬레이션 결과는 콜렉티브 입력에서 보이는 순간적인 작동기 포화현상 이외에는 만족할 만한 안정성과 추종성능을 보여 주고 있다.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.96-107
• /
• 2004

본 연구에서는 고도의 비선형 로봇 매니플레이터를 위한 새로운 적분 가변 구조 제어기를 설계하였다. 특수 적분 슬라이딩 면과 외란 관찰기를 이용한 사전 성능을 갖는 개선된 레귤레이션 제어이다. 어떠한 리칭 구간도 없이 주어진 초기조건부터 원점까지 슬라이딩 궤적을 정확히 사전 결정하기 위하여 특수한 초기 조건을 갖는 적분 변수를 갖는 슬라이딩 면이 채택되었다. 그리고 외란 관찰기를 사용한 연속 입력은 큰 계산 부하 없이 사전 추적오차 범위내의 사전에 결정된 슬라이딩 궤적을 추적하게 한다. 사전에 결정된 슬라이딩 궤적을 사전에 결정된 추적 오차의 성능은 슬라이딩 면의 값과 슬라이f딩 출력의 오차와 관계와 페루프 안정성과 함께 두 개의 정리를 통하여 명확히 검진되었다. 제안된 레귤레이션 제어기의 설계는 성능 설계와 강인성 설계로 각 독립 링크 상에 분리된다. 제안된 알고리즘의 유용성은 매개변수 불확실성과 페이로드 변동하의 이 축 로봇의 레귤레이션 제어에 대한 시뮬레이션 연구를 통하여 무 리칭 구간, 무 오버슈트, 사전 추적 오차를 갖는 사전 결정 출력, 용이한 출력 가변성, 설계 단계의 분리 등의 관점에서 입증되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.324-327
• /
• 1996

This paper describes the robust controller design methods applied to the problem of an automatic system for tow-vehicle/trailer combinations. This study followed an inverse Linear Quadratic Regulator(LQR) approach which combines pole assignment methods with conventional LOR methods. It overcomes two concerns associated with these separate methods. It overcomes the robustness problems associated with pole placement methods and trial and error required in the application of the LQR problem. Moreover, a Kalman filter is used as the observer, but is modified by using the loop transfer recovery (LTR) technique with modified transmission zero assignment. The proposed inverse LQG,/LTR controllers enhances the forward motion stability and maneuverability of the combination vehicles. At high speeds, where the inherent yaw damping of the vehicle system decreases, the controller operates to maintain an adequate level of yaw damping. At backward moton, both 4WS (2WS tow-vehicle, 2WS trailer) and 6WS (4WS tow-vehicle, 2WS trailer) control laws are proposed by using inverse LQG/LTR method. To evaluate the stability and robustness of the proposed controllers, simulations for both forward and backward motion were conducted using a detailed nonlinear model. The proposed controllers are significantly more robust than the previous controllers and continues to operate effectively in spite of parameter perturbations that would cause previous controllers to enters limit cycles or to loose stability.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.186-192
• /
• 1999

This paper introduces a study of a method for the forward kinematic analysis, which finds the 6 DOF motions and velocities from the given six cylinder lengths in the Stewart platform. From the viewpoints of kinematics, the solution for the inverse kinematic is easily found by using the vectors of the links which are composed of the joint coordinates in base and plate frames, to act contrary to the serial manipulator, but forward kinematic is difficult because of the nonlinearity and complexity of the Stewart platform dynamic equation with the multi-solutions. Hence we, first in this study, introduce the linear estimator using the Luenberger's observer, and the estimator using the nonlinear measured model for the forward kinematic solutions. But it is difficult to find the parameter of the design for the estimation gain or to select the estimation gain and the constant steady state error exists. So this study suggests the estimator with the estimation gain to be learned by the neural network with the structure of multi-perceptron and the learning method using back propagation and shows the estimation performance using the simulation.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.704-711
• /
• 2014

This paper proposes a combined fuzzy adaptive sliding-mode voltage controller (FASVC) for a three-phase UPS inverter. The proposed FASVC encapsulates two control terms: a fuzzy adaptive compensation control term, which solves the problem of parameter uncertainties, and a sliding-mode feedback control term, which stabilizes the error dynamics of the system. To extract precise load current information, the proposed method uses a conventional load current observer instead of current sensors. In addition, the stability of the proposed control scheme is fully guaranteed by using the Lyapunov stability theory. It is shown that the proposed FASVC can attain excellent voltage regulation features such as a fast dynamic response, low total harmonic distortion (THD), and a small steady-state error under sudden load disturbances, nonlinear loads, and unbalanced loads in the existence of the parameter uncertainties. Finally, experimental results are obtained from a prototype 1 kVA three-phase UPS inverter system via a TMS320F28335 DSP. A comparison of these results with those obtained from a conventional sliding-mode controller (SMC) confirms the superior transient and steady-state performances of the proposed control technique.