• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.596-603
• /
• 2010

본 논문에서는 비행 경로각을 이용하여 비행시간과 충돌각을 동시에 제어하는 호밍 유도법칙을 제안한다. 독립변수를 기존의 비행시간에서 유도탄 비행궤적의 비행 경로각으로 바꿔 비선형 모델을 구성한다. 제안한 호밍 유도법칙이 종말 종속 충돌각과 비행시간 제어가 가능하며, 목표물에 정확히 도달하는 것을 보여준다. 시뮬레이션을 통해 제안한 유도법칙의 성능을 확인한다.

• 한국항행학회논문지
• /
• 제16권1호
• /
• pp.8-15
• /
• 2012

본 논문에서는 표적이 고정되고 유도탄의 속도가 일정하다고 가정하고, 3차원 공간에서 비행 경로각을 이용하여 비행시간과 충돌각을 동시에 제어하는 호밍 유도법칙을 제안한다. 유도탄 비행궤적의 비행 경로각을 독립변수로 하여 비선형 모델을 구성한다. 제안한 호밍 유도법칙이 종말 종속 충돌각과 비행시간 제어가 가능하며, 목표물에 정확히 도달하는 과정을 보여준다. 그리고 동시공격시나리오에도 적용할 수 있다. 시뮬레이션을 통해 제안한 유도법칙의 성능을 확인한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권2호
• /
• pp.64-75
• /
• 2005

The Stratospheric Airship Platform (SAP) has a capability of performing the autonomous and guidance flight to satisfy given missions. To be used as the High Altitude Platforms (HAPs), the capabilities of controlling platform's accurate position and keeping the station point are the most important features. Under this circumstances Autonomous Flight Control System (AFCS) is a critical system and plays a key role in achieving the given requirements and succeeding in missions. In this paper, the design and analysis results of the AFCS algorithms and controller are presented. The brief summary of the AFCS hardware structure is also explained. The autopilot controller and guidance logics were designed based on the linear dynamics of the unmanned airship platform and the full nonlinear dynamics was considered to evaluate and verify their performances.

• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.207-213
• /
• 2005

This paper deals with an autonomous flight guidance and control algorithm design for TR301 tilt-rotor airplane under development by Korea Aerospace Research Institute for simulation purpose. The objective of this study is to design autonomous flight algorithm in which the tilt-rotor airplane should follow the given waypoints precisely. The approach to this objective in this study is that, first of all, model-based inversion is applied to the highly nonlinear tilt-rotor dynamics, where the tilt-rotor airplane is assumed to fly at helicopter flight mode(nacelle angle=0 deg), and then the control algorithm, based on classical control, is designed to satisfy overall system stabilization and precise waypoint following performance. Especially, model uncertainties due to the tiltrotor model itself and inversion process are adaptively compensated in a simple neural network(Sigma-Phi NN) for performance robustness. The designed algorithm is evaluated in the tilt-rotor nonlinear airplane in helicopter flight mode to analyze the following performance for given waypoints. The simulation results show that the waypoint following responses for this algorithm are satisfactory, and control input responses are within control limits without saturation.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.506-514
• /
• 2012

본 논문에서는 비행체의 운동 역학을 고려한 경로 추종을 위한 시선각 유도 법칙의 유도 게인 설계 기법에 대해 기술하였다. 비례-미분 게인과 접근 거리의 설계 변수로 구성된 시선각 기반 유도 법칙은 유도 게인 결정시 대부분 경험적 또는 실험적인 방법으로 설계하는 것이 일반적인데 이러한 경우 정밀하고 일관적인 경로 추종 성능 보장이 어렵고 비행체 기동 한계 및 운용 속도 등에 따라 설계 변수를 재설계해야하는 단점이 있다. 이러한 단점을 보완하기 위해 본 연구에서는 비행체의 속도에 따른 운동 역학을 고려하여 설계 변수의 개수를 최소화하고 비행 속도에 따라 유도 법칙 게인이 변화되어 정밀한 경로 추종이 가능할 뿐만 아니라 안정적이고 일관된 성능을 갖는 유도 법칙의 게인 설정 기법을 제안하였다. 제안된 기법은 비행체의 자세에 대한 1차 응답 속도를 고려한 비선형 시뮬레이션을 수행하여 추종 성능을 평가하였으며 선형 경로와 원형 경로에 대한 비행 시험 을 통해 추종 성능 및 알고리듬의 타당성을 실험적으로 확인하였다.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.149-158
• /
• 2024

Considering that different boundary conditions can have an important impact on structural vibration characteristics. In this paper, the nonlinear forced vibration behavior of functionally graded material (FGM) doubly curved shells with initial geometric imperfections under different boundary conditions is studied. Considering initial geometric imperfections and von Karman geometric nonlinearity, the nonlinear governing equations of FGM doubly curved shells are derived using Reissner's first order shear deformation (FOSD) theory. Three different boundary conditions of four edges simply supported (SSSS), four edges clamped (CCCC), clamped-clamped-simply-simply (CCSS) were studied, and a system of nonlinear ordinary differential equations was obtained with the help of Galerkin principle. The nonlinear forced vibration response of the FGM doubly curved shell is obtained by using the modified Lindstedt Poincare (MLP) method. The accuracy of this method was verified by comparing it with published literature. Finally, the effects of curvature ratio, power law index, void coefficient, prestress, and initial geometric imperfections on the resonance of FGM doubly curved shells under different boundary conditions are fully discussed. The relevant research results can provide certain guidance for the design and application of doubly curved shell.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1103-1111
• /
• 2014

The results of control law design for a tilt-rotor unmanned aerial vehicle that has a nacelle mounted wing extension (WE) are presented in this paper. It consists of a control surface mixer, stability and control augmentation system (SCAS), hold mode for altitude / speed / heading, and a guidance mode for preprogram and point navigation which includes automatic take-off and landing. The conversion corridor and the control moments derivatives between the original tilt-rotor and its variant of the nacelle mounted WE were compared to show the effectiveness of the WE. The nacelle conversion of the original tilt-rotor starts when the airspeed is greater than 30 km/h but its WE variant starts at 0 km/h in order to reduce the drag caused by the high incidence angle of the WE. The stability margins of the inner loop are presented with the optimization approach. The outer loops for the hold mode are designed with trial and error methods with linear and nonlinear simulation. The main control parameter for altitude control of the helicopter mode is thrust command and it is transferred to the pitch attitude command in airplane mode. Otherwise, the control parameter for the speed of the helicopter mode is the pitch attitude command and it is transferred to the thrust command in airplane mode. Therefore the speed and altitude hold mode are coupled to each other and are engaged at the same time when an internal pilot engages any of the altitude or speed hold modes. The nonlinear simulation results of the guidance control for the preprogrammed mode and point navigation are also presented including automatic take-off and landing in order to prove the full control law.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.366-369
• /
• 1991

A nonlinear controller based on feedback linearization method is proposed for an electromagnetic suspension system. After exactly linearizing the system with nonlinear feedback, linear control technique is applied. Modeling of stagger typed magnet is introduced and controlled for not only levitation, but guidance. By the feedback linearization, the nonlinear, MIMO system is linearized and decoupled, so we can use linear control law. The simulation of this system control skim is demonstrated. Robustness properties of the proposed controller with respect to the load variations and external disturbance is also analyzed for a multi input multi output system. In this properties, the boundary of variation is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1871-1876
• /
• 2005

In this paper, We present a new nonlinear adaptive control law using a disturbance accommodating control (DAC) observer for a Japanese automatic landing flight experiment vehicle called ALFLEX. A future spaceplane must have ability to deal with greater fluctuations in the stability and control derivatives of flight dynamics, because its flight region is much wider than that of conventional aircraft. In our previous studies, digital adaptive flight control systems have been developed based on a linear-parameter-varying (LPV) model depending on dynamic pressure, and obtained good simulation results. However, under previous control laws, it is difficult to accommodate uncertainties represented by disturbance and nonlinearity, and to design a stable flight control system. Therefore, in this study, we attempted to design a nonlinear adaptive control law using the DAC Observer and inverse dynamic methods. A good tracking property of the obtained system was confirmed in numerical simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.274-279
• /
• 1991

The development of a guided weapon system, such as a tactical missile, requires a performance analysis of a nonlinear system. Generally, the Monte Carlo analysis method is used for this purpose. The limitation of this method, a large number of simulations, for a nonlinear system performance analysis strongly motivated the development of a more efficient analytic technique. In this paper, the statisfical linearization methods is used for the performance analysis to the guided weapon system with the help of covariance analysis technique. Because the statistical linearization methods cannot be used to the look-up table nonlinear form such as aerodynamic coefficients, the second order polynomial representations is obtained from the table using the Lagrange interpolating polynomial and linearized statistically. Simple simulations about initial state conditions and random component in guidance command shows the results of this technique.