• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.214-214
• /
• 2000

This paper deals with the non contact optical sensor to measure the shape of transparent plates such as glass panel of LCD(Liquid Crystal Display). The conventional methods to obtain the shape or thickness of a transparent plates are contact type sensor such as LVOT(Linear Variable Differential Transformer). Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition, the high temperature glass casting makes the size of sensor body changed. These reasons makes the sensor degraded. In this paper, to overcome these problem, we proposed a low cost noncontact optical sensor this is composed of the Hologram laser unit of a CD-Pickup and a plastic lens. To evaluate the performance of the proposed optical sensor, a series of experiments were performed for various measurement condition. Based upon observation of the experimental result, the developed sensor shows good result for measuring the shape of transparent plates.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.477-482
• /
• 2013

We investigated the detection properties of nitrogen monoxide (NO) gas using transparent p-type $CuAlO_2$ thin film gas sensors. The $CuAlO_2$ film was fabricated on an indium tin oxide (ITO)/glass substrate by pulsed laser deposition (PLD), and then the transparent p-type $CuAlO_2$ active layer was formed by annealing. Structural and optical characterizations revealed that the transparent p-type $CuAlO_2$ layer with a thickness of around 200 nm had a non-crystalline structure, showing a quite flat surface and a high transparency above 65 % in the range of visible light. From the NO gas sensing measurements, it was found that the transparent p-type $CuAlO_2$ thin film gas sensors exhibited the maximum sensitivity to NO gas in dry air at an operating temperature of $180^{\circ}C$. We also found that these $CuAlO_2$ thin film gas sensors showed reversible and reliable electrical resistance-response to NO gas in the operating temperature range. These results indicate that the transparent p-type semiconductor $CuAlO_2$ thin films are very promising for application as sensing materials for gas sensors, in particular, various types of transparent p-n junction gas sensors. Also, these transparent p-type semiconductor $CuAlO_2$ thin films could be combined with an n-type oxide semiconductor to fabricate p-n heterojunction oxide semiconductor gas sensors.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.53.2-53
• /
• 2001

The Non-Contact Optical Sensor using the Hologram Laser for CD Pickup was developed to measure a shape of transparent objects and shown a good performance. Therefore the problems caused by the contact sensor are solved by using the Non-Contact Sensor. The Non-Contact Sensor has to move toward the objects and obtain the Focus Error Signal to measure a position of transparent objects. However, if the distance between the sensor and the object is shorter than the working distance of the objective lens, the sensor will be collided against the objects. In this paper we proposed a new algorithm to estimate the start position of the Focus Error Signal to solve the problems of collision between the sensor and the objects. In addition, we verified that the algorithm is free from the collision in the real time measurement.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.277-283
• /
• 2004

To fabricate green sheet of transparent dielectric for PDP front panel, dispersion of transparent dielectric slurry, density, and mechanical properties of green sheets have been investigated as a function of amount and composition of organic additives. Measurements of sedimentation and viscosity were employed to determine a proper dispersant and its amount for a well dispersed transparent dielectric powders in non-aqueous system. Green sheets, having various ratios of transparent dielectric powders to transparent dielectric powders＋ binder＋plasticizer and binder to binder＋plasticizer, were fabricated. All the tape casting slurries showed shear thinning effect, that is, the apparent viscosity decreased with the increase of shear rate. It was found that the amount and composition of organic additives were main variables to affect densities and mechanical properties of transparent dielectric green sheets for PDP.

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.327-341
• /
• 2020

Advanced forms of structural design (e.g., displacement-based methods) require knowledge of the non-linear force-displacement behavior of both the overall building and individual lateral load resisting elements, i.e., walls or building cores. Similarly, understanding the non-linear behaviour of the elements in a structure can also allow for a less conservative structural response to be calculated by better understanding the cracked (i.e., effective) properties of the various RC elements. Calculating the non-linear response of an RC section typically involves using 'black box' analysis packages, wherein the user may not be in complete control nor be aware of all the intricate settings and/or decisions behind the scenes. This paper introduces a user-friendly and transparent analysis program for predicting the back-bone force displacement behavior of slender (i.e., flexure controlled) RC walls, building cores or columns. The program has been validated and benchmarked theoretically against both commonly available and widely used analysis packages and experimentally against a database of 16 large-scale RC wall test specimens. The program, which is called WHAM, is written using Microsoft Excel spreadsheets to promote transparency and allow users to further develop or modify to suit individual requirements. The program is available free-of-charge and is intended to be used as an educational tool for structural designers, researchers or students.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.40-46
• /
• 2007

In this paper, the effect of a Doppler Spread caused by a mobile station (MS) is analyzed for transparent mobile multi-hop relays (MMR) systems based on orthogonal frequency division multiplexing (OFDM). The exact expression of interchannel interference (ICI) power and the upper bounds of ICI power are derived for OFDM systems with cooperative MMR or non-coopeartive throughput enhancement (TE) MMR. Also, the exact signal-to-interference ratio (SIR) and its lower bound as well as ICI power and its upper bound, derived in this paper, are evaluated by computer simulation with the OFDM parameter set used for mobile WiMax (WiBro) systems.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.313-322
• /
• 1993

The Western south Sea of Korea can be divided into 4 acoustic facies (AF I-AF IV) according to the variations of acoustic characters. Typical acoustic characters revealed in high-resolution seismic profiles (3.5kHz) are prolonged, internal reflected, non-penetrated, and transparent types. These acoustic types probably controlled by bottom condition and sediment properties such as composition and compaction of sediments. Acoustic facies I is characterized by prolonged type which is produced by absorbing of acoustic signals on the coarse sediments including gravels and shell fragments and irregular bedforms. Acoustic facies II is characterized by internal reflected type which is probably produced by differential sediments compaction. Acoustic facies III is characterized by non-penetrated type caused by scattering of acoustic signals on the well sorted fine ad very fine sand sediments. Acoustic facies IV is characterized by transparent type with non-internal reflector in limited thickness. Acoustic types in high-resolution profiles provide important information not only about the stratigraphy of sub bottom but also abut the sedimentary processes in shallow sea.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.95-103
• /
• 2017

The PCI Express is a widely used system bus technology that connects the processor and the peripheral I/O devices. The PCI Express is nowadays regarded as a de facto standard in system area interconnection network. It has good characteristics in terms of high-speed, low power. In addition, PCI Express is becoming popular interconnection network technology as like Gigabit Ethernet, InfiniBand, and Myrinet which are extensively used in high-performance computing. In this paper, we designed and implemented a evaluation platform for interconnect network using PCI Express between two computing nodes. We make use of the non-transparent bridge (NTB) technology of PCI Express in order to isolate between the two subsystems. We constructed a testbed system and evaluated the performance on the testbed.

• Journal of Information Display
• /
• v.9 no.3
• /
• pp.8-11
• /
• 2008

A novel non-alkoxide sol-gel process for synthesizing Ga-doped ZnO thin film on glass was derived for possible use as a transparent electrode in flat-panel displays, using zinc acetate dehydrate as the starting material. The structural and electrical properties of thin films have been characterized as functions of Ga addition and post-heat-treatments. Their carrier density, Hall mobility, and optical transmittance were measured and discussed herein to explain the characteristics of the sol-gel-derived Ga-doped ZnO thin film on glass.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.600-602
• /
• 2005

Recently image display devices have become large and high quality. To control the qualities of the component, measurements of the shape and thickness of a plate glass has been required. In order to measure the shape of the specular objects, Non-Contact Optical Sensor using Hologram laser unit was proposed. The sensor has a optical system that is composed of a Hologram laser and objective lens used for CD Player, and the sensor showed high performance for measuring the shape and thickness of transparent plates. In the sensor, the temperature of the sensor body is controlled by TEC(Thermoelectric Cooler). In this paper, we proposed the measuring method to make better performance of sensor using focus error signal of a hologram laser unit. It can measure the shape and the thickness of transparent objects with the s-type focus error signal which is generated by the sensor while it goes to the object.