• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.194-200
• /
• 2006

Recently, the population growth, industrial and agricultural development are rapidly undergoing in the Lower Rio Grande Valley (LRGV) in Texas. The Lower Rio Grande Valley (LRGV) composed of the 4 counties and three of them are interesting for Non-point and point source pollutant modeling: Starr, Cameron, and Hidalgo. Especially, the LRGV is an intensively irrigation region, and Texas A&M University Agriculture Program and the New Mexico State University College of Agriculture applied irrigation district program, projects in GIS and Hydrology based agricultural water management systems and assessment of prioritized protecting stream network, water quality and rehabilitation based on water saving potential in Rio Grande River. In the LRGV region, where point and non-point sources of pollution may be a big concern, because increasing fertilizers and pesticides use and population cause. This project objective seeks to determine the accumulation of non-point and point source and discuss the main impacts of agriculture and environmental concern with water quality related to pesticides, fertilizer, and nutrients within LRGV region. The GIS technique is widely used and developed for the assessment of non-point source pollution in LRGV region. This project shows the losses in $kg/km^2/yr$ of BOD (Biological Oxygen Demand), TN (total Nitrogen) and TP (total phosphorus) in the runoff from the surface of LRGV. Especially, farmers in Cameron County consume a lot of fertilizer and pesticide to improve crop yield net profit. Then, this region can be created as larger nonpoint source area for nutrients and the intensity of runoff by excess irrigation water. And many sediment and used irrigation water with including high nutrients can be discharged into Rio Grade River.

• 한국환경복원기술학회지
• /
• 제18권5호
• /
• pp.27-36
• /
• 2015

This study was conducted to grasp the effect of afforestation of cut slope using coir blocks on the improvement of scenery and the management of non point pollution source. Total four experimental tanks such as general soil slope, coir blocks, installation slope, slope refilling the inside of coir blocks slope with pebble, slope refilling the inside of coir blocks with soil and plant were installed, pollution source water was supplied and the possibility of reduction management of non point pollution source was analyzed at four items of COD, SS, T-N, T-P and main results drawn from this study are as follows. In conclusion, biodegradable materials like coir blocks and soil and plant layers are judged to be helpful in reduction management of non point pollution source inflowing to water space from land area. Thus, the reduction of non point pollution source occurring at land area is thought to be fully controlled at the cut slope, the space prior to inflowing to water ecological space like a stream or a swamp area.

• 공학논문집
• /
• 제8권1호
• /
• pp.107-118
• /
• 2006

연안수질 개선 및 환경회복도 추정을 위한 3차원 수질 모델의 구성에서 나타나는 어려운 점들로는 실측자료가 부족하다는 점과 지속적 관측이 어렵다는 점들을 들 수 있다. 따라서, 연안역에 대한 수질모의 및 관리기법 개발 연구의 중간 단계로서 진해-마산만 유역에 대한 강우 및 비점오염물 유출 양상을 실측하였고, 유량 및 오염물 유출양상에 대한 해석을 위하여 위성영상시스템 및 지리정보체계 기법을 적용하였다. 지리정보체계(IDRISI 사용)를 통한 진해-마산만 유역의 용지 사용분포, 지점오염 부하량과 유역정보 결과를 사용하여 수질모의 모형(SWMM 사용)을 적용하였고, 관측되어진 비점오염물들의 유출양상을 통하여 오염물들의 유출특성을 고려한 관측기법의 개선방안과 GIS기법의 적용 방안을 제시하였다.

• KIEAE Journal
• /
• 제14권3호
• /
• pp.55-63
• /
• 2014

This study selected and analyzed filter media that can be applied in non-point pollution reduction devices aimed at processing the source of pollution on site for road runoff that increases rapidly in rainfall-runoff in order to improve the water quality of urban areas. First, the factors that affect the quality of runoff caused by sources of non-point pollution include physical and social factors such as the usage of land around the area of water collection, type of pavement and movement of cars and people, as well as rainfall characteristics such as frequency, intensity, amount and duration of rainfall. Second, the purification tests of the filter media were processed for pH, BOD, COD and T-P, and the filter media showed to have initial purification effect at that items. However, the filter media showed to be very effective for the processing of SS, T-N, Zn and Cd from the beginning to the end. Third, for filter media, zeolite and vermiculite showed to be effective for processing SS, T-N, Zn and CD constantly, and composite filter media including zeolite showed to have strong processing effects. The authors conclude that this study can be applied to technical areas and policies aimed at reducing non-point pollution in urban areas and can also contribute to allowing eco-friendly management of rainfall as well as improvement of water quality.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.111-115
• /
• 2010

Beaches in estuaries, bays, and harbors are frequently contaminated with indicators of human pathogens such as fecal indicator bacteria. Tracking down the sources of contamination at these enclosed beaches is complicated by the many point and non-point sources that could potentially degrade water quality along the shore. A mathematical framework was developed to test quantitative relationships between fecal indicator bacteria concentration in ankle depth water at enclosed beaches, the loading rate of fecal indicator bacteria from non-point sources located along the shore, physical characteristics of the beach that affect the transport of fecal indicator bacteria across the beach boundary layer, and a background concentration of fecal indicator bacteria attributable to point sources of fecal pollution that impact water quality over a large region of the embayment. Field measurements of fecal indicator bacteria concentrations and water turbulence at an enclosed beach were generally consistent with predictions and assumptions of the mathematical model, and demonstrated its utility for assessing waste load of non-point sources, such as runoff, bather shedding, bird droppings, and tidal washing of contaminated sediments.

• 한국수자원학회논문집
• /
• 제43권4호
• /
• pp.367-381
• /
• 2010

최근 들어 도시화와 이상기후의 영향으로 유역에서의 유출특성과 오염물질 발생특성도 변화하고 있고 이에 따라 정교한 유역 수질분석이 요구되고 있다. 유역의 비점오염원 관리를 위하여 충분조건을 갖추어야 할 정량분석이 선행되어야 하나 점오염원 관리와 달리 자연 내의 복잡한 현상을 반영하여야 하기 때문에 비점오염원의 정량화 해석에 어려움을 겪어왔다. 강우 및 유출량 관계와 덧붙여 오염물질이 하천수질에 영향을 미치기까지 도달시간 해석 및 점오염원과 비점 오염원의 분리가 용이하지 않기 때문이다. 본 연구의 목적은 토양도, 토지이용도 자료 등을 이용하여 유역의 비점오염원을 정량화하고, 비점오염원 관리를 위한 기반자료로 활용하기 위함에 있다. 이를 위하여 유역모형 SWAT (Soil and Water Assessment Tools) 모형을 이용하여 비점오염원 정량화를 수행하였다. 유역의 비점오염원 비율은 국립환경과학원에서 조사된 비점오염원 비율인 22~37%정도와 비교적 잘 일치하는 것으로 나타나고 있다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제30권4호
• /
• pp.443-461
• /
• 2023

In this paper, we establish some common fixed point theorems satisfying contraction mapping principle on partially ordered non-Archimedean fuzzy metric spaces and also derive some coupled fixed point results with the help of established results. We investigate the solution of integral equation and also give an example to show the applicability of our results. These results generalize, improve and fuzzify several well-known results in the recent literature.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.793-798
• /
• 2008

Extreme value inference deals with fitting the generalized extreme value distribution model and the generalized Pareto distribution model, which are recently combined to give a single model, namely a two-dimensional non-homogeneous Poisson exceedance point process model. In this paper, we extend the two-dimensional non-homogeneous Poisson process model to include non-stationary effect or dependence on covariates and then derive the likelihood for the extended model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1283-1287
• /
• 2003

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore. it becomes a important to handle the huge amount and various types of point data to generate a surface model efficiently. This paper proposes a new triangular mesh generation method using 3D grids. The geometric information of a part can be obtained from point cloud data by estimating normal values of the points. In our research, the non-uniform 3D grids are generated first for feature based data reduction based on the geometric information. Then, triangulation is performed with the reduced point data. The grid structure is efficiently used not only for neighbor point search that can speed up the mesh generation process but also for getting surface connectivity information to result in same topology surface with the point data. Through this integrated approach, it is possible to create surface models from scanned point data efficiently.

• 한국물환경학회지
• /
• 제24권4호
• /
• pp.465-472
• /
• 2008

Soil and Water Assessment Tool (SWAT) model was selected as a tool for assessing the effect of pollutant sources on the total loads from the Chungju Dam upstream watershed. The model was constructed through calibration of parameters related to nitrogen (N) and phosphorus (P), which was based on the runoff and sediment modeling performed in the previous research. Using this, the spatial and temporal pollutant loadings by source type were investigated. Results of this study indicated that in most forested upstream sub-watersheds, pollutant loadings from point sources were very low, and total loadings by point and non-point sources were also insignificant. On the other hand, in #14 sub-watershed including Jecheon city, the loadings by point source were relatively considerable. For the whole watershed, non-point sources accounted for 99% of sediment, 97% of N, and 93% of P loads. And monthly non-point source loadings were concentrated on rainy summer season, while point source loadings of N and P kept nearly constant throughout the year and were high on dry winter season relative to non-point source.