• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.371-378
• /
• 2003

한반도 서, 남해안 해성점토에 대하여 초기간극비와 자연함수비 및 액성한계의 물리적 특성과 압축지수와의 상관성을 규명하기 위해 비교적 신뢰성이 크다고 볼 수 있는 대형 항만 공사용 최근자료를 분석하였다. 시료교란의 정도를 분석하기 위하여 각 표본별 실내압밀시험을 실시하고 Schmertmann이 제안한 방법으로 보정하여 수정압축지수를 산정하였다. 또한 이들 자료를 토대로 실내압밀시험으로부터 얻어진 압축지수를 경험적 방법에 의하여 보정한 후 현장 처녀압축곡선과의 관계를 분석하고, 단순회귀분석, 다중회귀분석 및 비선형 회귀분석을 실시하여 최적의 회귀모델을 구한 후 해성점토에 적용할 수 있는 토질특성과 시료교란의 영향을 고려한 압축지수와의 상관 관계식을 제안하였다. 분석 결과, 시료교란의 영향을 경험적 방법으로 평가해 본 결과 현장 압축지수는 실험실 압축지수의 1.16배정도 크게 평가되었다. 해성점토의 물리적 특성과 압축지수의 상관성에 대한 최적의 회귀모형은 토질정수의 누승식 또는 지수승식 형태의 비선형회귀식이 가장 적합한 것으로 나타났다. 또한, 설계 및 실무에 보다 쉽게 적용할 수 있도록 하기 위하여 선형관계식을 사용하는 경우에는 압축지수의 상관식을 물성치의 구간에 따라 구분하여 사용하는 것이 바람직하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1081-1089
• /
• 2008

Highly plastic clays in their normally consolidated state are not linear but are concave upwards. Thus their compression index deceases with the increase in consolidation pressure. Likeness the e - log ${\sigma}\;_{\upsilon}\;'$ curves of the silts are not linear but are convex upwards. In this paper, conducted consolidation test with four undisturbed field soil and found that their e - log ${\sigma}\;_{\upsilon}\;'$ plots are not linear. And analyzed difference of settlement between computed value with compression index($C_c$) and computed value with improved compression index($\mathbb{C}$).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.5056-5078
• /
• 2018

In this work we propose a compression technique that makes use of linear and perceptually uniform CIE $La^*b^*$ color space in the JPEG image compression framework to improve its performance at lower bitrates. To generate quantization matrices suitable for the linear and perceptually uniform CIE $La^*b^*$ color space, a novel linear Contrast Sensitivity Function (CSF) is used. The compression performance in terms of Compression Ratio (CR) and Peak Signal to Noise Ratio (PSNR), is further improved by utilizing image dependent, variable and non-uniform image sub-blocks generated using a proposed histogram-based merging technique. Experimental results indicate that the proposed linear CSF based quantization technique yields, on an average, 8% increase in CR for the same reconstructed image quality in terms of PSNR as compared to the conventional YCbCr color space. The proposed scheme also outperforms JPEG in terms of CR by an average of 45.01% for the same reconstructed image quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1091-1098
• /
• 2003

Flexure bearings have been used in linear-resonant compressors to maintain a non-contacting clearance seal between the piston and cylinder. There are two types of tangential cantilever bearing and spiral arm bearing with flexure bearings. A newly devised linear flexure bearing (KIMM-Ml) for compression refrigeration machines is disclosed having improved tight gas clearance maintaining capability for better system performance. KIMM-Ml is an integrated device comprising an axially moving diaphragm with circumferentially arranged arc-shaped flexure blades secured between rim and hub spacers, which turn out to have higher radial stiffness than the one with circumferential tangential cantilever flexure blades. It is expected for KIMM-Ml to play a key role in designing long life, special purpose compression refrigeration machines by providing frictionless, non-wearing, linear movement and radial support for the machines as well as a gas clearance seal by maintaining extremely tight clearances between piston and cylinder.

• 한국항해항만학회지
• /
• 제36권3호
• /
• pp.181-187
• /
• 2012

고소성 점토 및 소성, 비소성 실트의 정규압밀상태시의 처녀압축곡선이 항상 선형적 거동을 하는 것은 아니며, 비선형성을 가진 한국의 남해안 점토의 경우 압밀압력이 증가함에 따라 압축지수가 감소하며, $e-{\log}{\sigma}_{\upsilon}{\prime}$곡선은 아래로 오목한 형태의 거동을 하는 것으로 연구되었다. 본 연구에서는 한국 남부 해안의 점토를 대상으로 압밀시험을 수행하였고, 결과를 분석하여 초기간극비, 액성한계, 소성지수와 압축지수의 비선형성을 분석하였다. Butterfield의 기법을 이용한 ${\ln}{\upsilon}-{\ln}{\sigma}_{\upsilon}{\prime}$에서 액성한계 50~100%사이의 처녀압축곡선은 선형성을 보였으나, 초기간극비 2.24%, 액성한계 100%, 소성지수 60이상에서의 고소성 점토의 시험결과에서는 뚜렷한 비선형성이 나타났다. 비소성 실트(fly ash)를 90%이상 함유한 재성형 시료의 경우 압밀압력이 증가함에 따라 압축지수가 증가하는 경향을 보였다.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.955-971
• /
• 2014

Large post-buckling behavior of Timoshenko beams subjected to non-follower axial compression loads are studied in this paper by using the total Lagrangian Timoshenko beam element approximation. Two types of support conditions for the beams are considered. In the case of beams subjected to compression loads, load rise causes compressible forces end therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. The beams considered in numerical examples are made of lower-Carbon Steel. In the study, the relationships between deflections, rotational angles, critical buckling loads, post-buckling configuration, Cauchy stress of the beams and load rising are illustrated in detail in post-buckling case.

• Tribology and Lubricants
• /
• 제21권4호
• /
• pp.171-176
• /
• 2005

O-ring seal is an essential component in various mechanical apparatuses for a sealing of oil container and pressure vessels. This paper presents the sealing pressure and compressive contact behaviors of hi-polymer O-rings, which is made by an outer shell of FFKM material and an inner solid ring of FKM one. The contact normal pressure and its ratios are measured by experimental method with an automatic control system of the working temperature and analyzed numerically by using the non-linear Marc FEM program. The results show reasonably good agreements between the computed FEM results and measured ones when the operating temperature is kom normal temperature of $18^{\circ}C$ and a high temperature of $300^{\circ}C$ But the compared values between the computed and tested results show a little difference because of the increased temperature, which is related to the non-linear parameter of the O-ring material. Bi-polymer 0-ring shows a good contact normal stress and compression behavior for a given operation temperature and compression ratio.

• 산업기술연구
• /
• 제25권A호
• /
• pp.57-65
• /
• 2005

In this paper, for the highly plastic marine soft clay distributed in west and southern coast of Korean peninsula of Kwangyang and Busan New Port areas, correlation between compression index and other indices representing geotechnical engineering properties such as liquid limit, void ratio and natural water content were analyzed. Appropriate empirical equations of being able to estimate the compressibility of clays in the specific areas were proposed and compared with other existing empirical ones. For analyses of the data and test results, data for marine clays were used from areas of the South Container Port of the Busan New Port, East Breakwater, Passenger Quay, Jungma Reclamation and Reclamation Containment in the 3rd stage in Kwangyang. In order to find the best regression model by using the commercially available software, MS EXCEL 2000, results obtained from the simple linear regression analysis, using the values of liquid limit, initial void ratio and natural water content as independent variables, were compared with the existing empirical equations. Multiple linear regression was also performed to find the best fit regression curves for compression index and other soil properties by combining those independent variables. On the other hands, another software of SPSS for non-linear regression was used to analyze the correlations between compression index and other soil properties.

• Structural Engineering and Mechanics
• /
• 제84권4호
• /
• pp.517-530
• /
• 2022

In re-assessing the Jacket-type fixed steel structures, the current standards often allow the simplicity of corrosion sections using local buckling or equivalent section approach to applying empirical formulae of frame stress and resistance analyses. However, those approaches can lead to significant errors for non-uniform corroded frames in a specific area, including force distribution, stress, and allowable strength of the tubular section, compared to the actual cases. This paper investigates a suitable approach to determine the actual stress on non-uniform corroded tubular frames under compression through the non-linear ABAQUS model by considering the effect of large deformation on the frame axis and the frame section. There are 3 scenarios of interest. In the 1st and 2nd scenarios with simple corrosion cases, the stress ratios using the numerical model and theoretical formulae correspond to the calculation of allowable strength reduction ratios in standards. However, scenario 3, which describes non-uniform corroded sections based on survey data, provides considerable differences in results. Therefore, it proves the reliable and effective results when using this method to analyze the resistance of the actual corroded section in the Jacket platforms.

• Computers and Concrete
• /
• 제1권4호
• /
• pp.433-455
• /
• 2004

The paper presents results of FE-calculations on shear localizations in quasi-brittle materials during both an uniaxial plane strain compression and uniaxial plane strain extension. An elasto-plastic model with a linear Drucker-Prager type criterion using isotropic hardening and softening and non-associated flow rule was used. A non-local extension was applied in a softening regime to capture realistically shear localization and to obtain a well-posed boundary value problem. A characteristic length was incorporated via a weighting function. Attention was focused on the effect of mesh size, mesh alignment, non-local parameter and imperfections on the thickness and inclination of shear localization. Different methods to calculate plastic strain rates were carefully discussed.