• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.121-132
• /
• 1987

The estuarine tide becomes strongly distorted as it propagates into upstream reach of tidal river system common to the west and south coasts of Korea. This distortion can be represented by friction, non-linear advection, interaction with channel geometry and freshwater discharge. In the present paper, the effect of an increased river discharge on tide progressing into the Keum River is evaluated quantitatively by one-dimensional hydrodynamic model. The computed relation between the prevailing discharges and the tide reaching the upper reaches of the river, both its range and its timing has shown that there are good agreement with theoretical inferences of Godin(1985).

• International Journal of CAD/CAM
• /
• v.9 no.1
• /
• pp.37-46
• /
• 2010

Existing methods for the registration of blurred images are efficient for the artificially blurred images or a planar registration, but not suitable for the naturally blurred images existing in the real image mosaic process. In this paper, we attempt to resolve this problem and propose a method for a distortion-free stitching of naturally blurred images for image mosaic. It adopts a multi-resolution and robust feature based inter-layer mosaic together. In each layer, Harris corner detector is chosen to effectively detect features and RANSAC is used to find reliable matches for further calibration as well as an initial homography as the initial motion of next layer. Simplex and subspace trust region methods are used consequently to estimate the stable focal length and rotation matrix through the transformation property of feature matches. In order to stitch multiple images together, an iterative registration strategy is also adopted to estimate the focal length of each image. Experimental results demonstrate the performance of the proposed method.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.412-418
• /
• 2010

This paper proposes a new algorithm to generate a reference signal for an active power filter using a sliding-window FFT operation to improve the steady-state performance of the active power filter. In the proposed algorithm the sliding-window FFT operation is applied to the load current to generate the reference value for the compensating current. The magnitude and phase-angle for each order of harmonics are respectively averaged for 14 periods. Furthermore, the phase-angle delay for each order of harmonics passing through the controller is corrected in advance to improve the compensation performance. The steady-state and transient performance of the proposed algorithm was verified through computer simulations and experimental work with a hardware prototype. A single-phase active power filter with the proposed algorithm can offer a reduction in THD from 75% to 4% when it is applied to a non-linear load composed of a diode bridge and a RC circuit. The active power filter with the proposed reference generation method shows accurate harmonic compensation performance compared with previously developed methods, in which the THD of source current is higher than 5%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1589-1595
• /
• 2007

Recently many communication systems ate adapting the OFDM(Orthogonal Frequency Division Multiplexing) for multimedia data services. However, OFDM has some problems that PAPR is increased when sub-carries are summed up with same phases. This problem causes severe signal distortions while the signal is passing through non-linear system such as power amplifier resulting in performance degradation of transmission system. In this paper, we use IF-Clipping method to solve PAPR problem and the signal distortion caused by clipping is limited by use of SAW (Surface Acoustic Wave) filter and power amplifier(TWTA). And we derive the optimal parameter(PAPR, Backoff) values to meet the spectrum mask of WiBro system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.101-110
• /
• 2002

This article summarises the traditional method of soil-structure interaction based on the modulus of subgrade reaction and shows its weakness. In order to avoid these weakness, a new soil-structure interaction model is proposed. This model considers the soil as a set of connected springs which enables interaction between springs. Its use is as simple as the traditional model but allows to define the soil properties independently from the structural properties and the loading conditions. Thus, the definition of the modulus of subgrade reaction is unnecessary as each component is defined by its own modulii (Young's modulus and shear modulus). The non-linear soil behaviour for the shear stress versus distortion is also incorporated in the model. This feature allows to pinpoint the arching effect in the ground and shows how the stresses concentrate on stiff materials. Based on these principles, three dimensional program has been developed in order to solve the difficult problem of soil improvement by inclusions (stiff or soft). Also the possibility to take into account a flexible mat and/or a subgrade layer has been implemented. Equations used in the model are developed and a parametric study of the necessary data used in the program is presented. In particular, the Westergaard modulus notion and the arching effect are analysed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.434-439
• /
• 2019

This paper proposed a control algorithm to compensate the delay time to improve the signal to noise, and the proposed control algorithm estimate the target information to apply the continuous wave radar equation. The proposed control algorithm improves the output signal of each array element bv multiplying the weight of the receive signal to the signal to noise ratio. Radar radiate a signal in spatial and the target information is estimated by the echoed signal from the target. But the signal in the wireless communication environment occurs the delay time due to the multipath which appear human and natural structures. It is difficult to accurately estimate the desired information because of the degradation for the system performance due to the interference signal and the signal distortion. The target information can be improved by compensating the delay signal to apply the weight to the received signal by using the uniform linear array antenna. As a simulation result, we show that the performance of the proposed control algorithm and the non-compensated delay time are compared. The proposed control algorithm proved that the target distance estimation information is improved.

• Journal of Korea Water Resources Association
• /
• v.45 no.9
• /
• pp.915-928
• /
• 2012

Han River estuary (HRE) is located at the middle of the western coast of Korea, and tidal currents were measured at 4 stations in this estuary during the winter season, and previously observed tide data was analyzed. The results of amplitude ratio of $M_4/M_2$ showed that increasing upward to estuary in the HRE. Tide harmonic constants of relative phase $2M_2-M_4$ represent flood dominance, with under 180 degree. But this method has a limit of analysis that typically based on the non-linear distortion of the tidal current in tidal lagoon system where freshwater discharge is assumed to be relatively small. The results of statistically tidal current data indicated that ebb current velocity would be great unlike tide data. Ebb and flood duration time is calculated by slack time of tidal current showed that ebb duration time is longer than flood. The results of correlation of analysis show high value (0.9) between tidal current stations from Incheon harbor to north entrance of Yeomha channel. We reconstructed to find the reasons for the features of ebb dominance the results of harmonic analysis. As major component ($M_2$) in combination with shallow water component ($M_4$), the tidal curve was presented flood dominance that has a flood current is stronger. However, these curve were changed to ebb dominance add up the non-harmonic components that had ebb direction flow by calculated tidally averaged current. The characteristic of enhancement on ebb is showed around the Yeomha channel in the HRE, because averaged flow which acts seaward such as long-term tidal current components due to non-linear effect and freshwater which overcome the flood current.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.845-854
• /
• 2003

In this paper, the characteristics of compensation for WDM channel signal distortion due to both chromatic dispersion and Ken effect in 1,000 km 200 Gbps(5${\times}$40 Gbps) WDM systems was investigated. The WDM system has a path-averaged intensity approximation(PAIA) mid-span spectral inversion(MSSI) as a compensation method. This system has a highly nonlinear dispersion shifted fiber(HNL-DSF) optical phase conjugator(OPC) in the mid-way of transmission line. In order to evaluate the degree of compensation, 1 dB eye opening penalty(EOP), bit error rate(BER) characteristics and power penalty of 10$\^$-9/ BER are used. It is confirmed that HNL-DSF is an useful nonlinear medium in OPC fur wideband WDM system with PAIA MSSI and that the optimal compensation for WDM channel distortion is achieved by the selection of pump light power of OPC, which equalize the conjugated light power into the second half fiber section with the input WDM signal light power depending on total transmission length, dispersion coefficient of fiber, OPC pump light wavelength, conversion efficiency of WDM channel in OPC.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.5
• /
• pp.737-746
• /
• 2004

Two-channel multiwavelet system is investigated for image compression application in this paper. Generally, multiwavelets are known for their superb capability of compressing non-stationary signals like voice. However, multivavelet system have a critical problem in processing and compressing image data due to mesh-grid visual artifacts. In our two-channel multiwavelet system we have investigated incorporation of pre and post filtering to the multiwavelet transform and compression system for alleviating those ingerent visual artifacts due to multiwavelet effect. In addition, to quantify the image data compression performance of proposed multiwavelet system, computer simulations have been performed using various image data. For bit allocation and quantization, the Lagrange multiplier technique considering data rate vs. distortion rate along with a nonlinear companding method are applied equallly to all systems considered, here. The simulation results have yielded 1 ~ 2 dB compression enhancement over the scalar savelet systems. If the more advanced compression methods like SPIHT and run-length channel coding were adopted for the proposed multiwavelet system, a much higher compression gain could be obtained.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.53-57
• /
• 2002

Recently, digital communication system becomes high speed, as communication demand dose not only increases sharply, but an image, voice various kinds data also comes multimedia. In transmitting data at a high speed, the main problem is fading by multipath. A linear or nonlinear distortion arise In multipath channel fading from ISI(Intersymbol Interference). For restoring this distorted signal, A lot of equalizer and adaptive algorithm is introduced. This paper compares and analysises, for improving communication quality in channel which is long delay spread, performance of decision feedback equalizer by RLS algorithm, a channel estimation by RLS-MLSE and viterbi equalizer Particularly, there Is exactly channel estimation of impluse response and excellent property of equalization about channel, which delay spread is long impluse response comparatively and is property of non-minimun phase.