• 생물환경조절학회지
• /
• 제3권1호
• /
• pp.52-57
• /
• 1994

방울토마토의 수경재배시 과실의 외형형질을 비파괴적으로 추정하고, 이를 검정하였다. ‘Chelseamini’와 ‘뽀뽀’에 비해 ‘Minicarol’의 외형상의 크기(과장, 과폭, 과중, 과실부피)가 특히 작았다. 토마토 과실의 외형형질 간에는 고도의 상관이 인정되어 과실의 생장은 길이생장과 부피생장과 균형있게 이루어지는 것으로 나타났다. 과실의 체적 및 무게는 다음 식으로 추정 가능하였다. 과실의 체적=0.071$\times$(과장+과폭)$^3$＋0.451, 과실의 무게 =0.072$\times$(과장+과폭)$^3$＋0.542. 1993-1994년에 수확한 과실도 이 식으로 설명되었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.334-343
• /
• 1993

In order to evaluate the quality of peaches non-destructively, the surface color and spectral reflectance of KURAKATAWASE, MIBAEKTO and OKUBO cultivar were measured. Also an attempt was made to correlate reflectance characteristics with quality evaluation parameters such as chlorophyll, anthocyanin , soluble solid , and firmness.

• 한국지반환경공학회 논문집
• /
• 제23권10호
• /
• pp.13-19
• /
• 2022

본 연구는 암석의 압축강도를 비파괴적으로 산정하기 위하여 암석시편 초기타격 및 반발에 의한 연속적인 반복타격 시 발생하는 타격력에 대한 응답신호를 모두 측정하고 이를 누적한 전체 타격력 신호에너지를 이용하고 그 결과를 제시하는 것에 관한 것이다. 본 연구에서는 이를 위해서 타격 및 측정장치를 고안 및 셋업하였고 이를 이용하여 암석시편을 회전 자유낙하에 의해 초기 타격토록하고 반발작용에 의한 반복타격이 이루어질 수 있도록 하였다. 본 연구에서는 서로 다른 세 종류의 암석시편에 대하여 타격력실험을 실시하고 발생신호를 측정하였다. 각 시편별 초기 및 반발타격으로부터 발생된 신호로부터 산정된 전체 타격력 신호에너지와 각 시편별 측정한 직접압축강도와 상호 비교하였다. 비교결과, 타격력 응답신호로 부터 산정된 전체 타격력 신호에너지는 시편의 직접압축강도와 직접적인 관계가 있다는 것을 확인하였으며, 이를 통해 암석의 압축강도는 타격 시 발생하는 타격력 응답신호로부터 산정된 전체 타격력 신호에너지를 이용하여 비파괴적으로 산정할 수 있음을 알 수 있었다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1525-1525
• /
• 2001

Non-destructive determination of soluble solids(Brix) in harvested fruits using near infrared(hereafter, NIR) spectroscopy has been reported by many researchers. We have just reported on non-destructive estimation of Brix in harvested melons using a NIR Systems Model 6500 spectrophotometer(Ito et al., 2000). There is a melon cultivar that is difficult to judge the harvest time from the external appearance. If we can determine Brix in growing fruits non-destructively in the field, immature fruits will not be harvested. A portable m spectrophotometer for field use has been just developed by Kubota Corporation. The spectral data of growing melons were measured by the portable spectrophotometer. A commercial program was used for multiple linear regression analysis. Brix in growing melons could be estimated by a multiple regression equation calibrated with harvested melons. Absorbances of 906 and 874 nm were included as the independent variables in the multiple regression equation, and these wavelengths are key wavelengths for non-destructive Brix determination.

• Journal of Biosystems Engineering
• /
• 제19권1호
• /
• pp.33-41
• /
• 1994

In order to evaluate the quality of peaches non-destructively, the surface color and spectral reflectances of KURAKATAWASE, MIBAEKTO, and OKUBO cultivar were measured. Also an attempt was made to correlate reflectance characteristics and tristimulus values with quality evaluation parameters such as chlorophyll content, soluble solids, anthocyanin content, and firmness. Further analysis of the correlation coefficients showed that spectral reflectance would be effective for the quality evaluation of peaches.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.200-205
• /
• 1995

The 1st and 2nd-order grating structure for long wavelength DFB(Distributed FeedBack) laser diodes are successfully fabricated on InP substrates by using electron beam lithography and reactive ion etch techniques, and also characterized non-destructively by diffraction analysis without removal of photo-resis layer. A new composite layer made by lifted-off Cr layer on thin SiO2 film is developed and used as an etch mask, because PMMA, the e-beamresist, is unsuitable for reactive ion etch of InP. In addition, it is experimentally confiremed that diffraction analysis makes it possible to predict the grating parameters, and the analysis can be used as a non-destructive on-line test to prevent incomplete gratings from being successively processed.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.302-308
• /
• 2008

Composite materials are widely used as structural materials for aerospace engineering because of its excellent mechanical properties such as light weight, high stiffness, and low thermal expansion. In driving, impact damage is one of the common but dangerous damages, caused by internal failure of the laminas interface which is not detected by in the surface. Many techniques to detect defects or delaminate between laminates have been reported. Shearography is a kind of laser speckle pattern interferometry with the advantages of non-destructive, non-contact, high resolution and displacement slope measurement. In this paper, the shearography is used to evaluate non-destructively impact damaged surface of the composite material and a measuring method using shearography for the thermal deformation of a impact damaged composite material is discussed. The basic principles of the technique are also described briefly.

• 한국표면공학회지
• /
• 제55권4호
• /
• pp.231-235
• /
• 2022

As environmental pollution becomes more serious, the demand for electric vehicles (EVs) and lithium-ion batteries for electric vehicles is rapidly increasing worldwide. Accordingly, the amount of waste batteries is also increasing, and a technology for recycling and reusing them is required. In order to reuse a used battery, it is necessary to non-destructively diagnose the deterioration condition of the battery. Therefore, in this study, we investigate the diagnosis of degradation for parallel-connected lithium-ion battery cells through non-constructive electrochemical approach. As the number of parallel-connected cells increased, in addition to linear degradation, abrupt step-like degradation occurred, which is attributed to the predominant degradation of specific cells. In addition, it is confirmed that deteriorated cells among multiple cells can be distinguished through a simple measurement of open circuit voltage (OCV).

• Structural Engineering and Mechanics
• /
• 제2권4호
• /
• pp.403-412
• /
• 1994

The durability of concrete is related to the permeation characteristics of its near surface. An attempt was made to use the permeation characteristics namely, absorptivity, permeability and diffusivity, to predict the freeze/thaw resistance of concrete. Test results indicate that in general, there was a trend that freeze/thaw resistance of concrete was enhanced with improved absorptivity and diffusivity whilst the freeze/thaw resistance of normal concrete was found to have the best relationship with its intrinsic permeability. The latter method is therefore proposed to be adopted to predict freeze/thaw resistance of normal concrete. Since Figg air test is an inexpensive and simple test method that measures indirectly the intrinsic permeability of concrete, it is further proposed that it could be used as a quality control tool to assess, non-destructively, the freeze/thaw durability potential of in-situ concrete.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.129-129
• /
• 1998

Most of the surface/interface analysis tools have limited depth profiling c capability in terms of the profiling range and the depth resolution. However, M MEIS can profile the surface and subsurface composition and structure q quantitatively and non-destructively with atomic layer depth resolution. I In this presentation, the MEIS system developed at KRISS will be briefly d described with an introduction on the principle of MEIS. Recent MEIS r results on the surface and interface composition and structural change due to i ion bombardment will be presented for preferential sputtering of T:없Os and d damage depth profiles of SHooD, Pt(l11), and Cu(l1D due to Ar+ ion b bombardment. Direct observation of strained Si lattices and its distribution i in the SHool)-SiCh interface and the initial stage of Co growth on Pt(l11) w will be reported. H surfactant effects on epitaxial growth of Ge on Si(ooD w will be discussed with STM results from SND.