• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.1-6
• /
• 2010

Patterned optical components are widely used for optical products such as LCD and lighting. Since CCFL was used as a light source in the products, prism films having linear continuous optical patterns were widely used. However, LED which is a dot light source is popular recently, therefore, the optical products need new optical components having non-continuous optical patterns. Indentation machining method is a powerful method for machining of non-continuous pattern. When a copper mold and a brass mold were machined by this method, severe plastic deformation called pile-up was observed around the patterns. Since pile-up has negative relationship to ductility, this deformation can be eliminated by annealing treatment which makes the materials ductile. No plastic deformation occurred when machined after annealing at $600{^{\circ}C}$ and $575{^{\circ}C}$ for copper and brass, respectively. Finally, non-continuous optical patterns with high quality were machined on a copper mold and a brass mold successively.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.99-104
• /
• 2004

본 논문에서는 연속적인 데이터를 위한 새로운 에러패턴 ROM(error pattern ROM: EP-ROM) 압축 기법이 제한되었다. EP-ROM은 연속적인 데이터를 근사값과 에러로 나눈 후 에러 대신 에러패턴의 인덱스를 저장함으로써 ROM의 크기를 줄인다. 이 기법은 연속된 데이터를 양자화할 때의 많은 경우 같은 에러패턴을 가진다는 특징을 이용한 것으로 ROM의 크기를 매우 작게 줄일 수 있다. 실험결과에서는 EP-ROM은 다양한 연속적인 데이터에 대하여 ROM 크기를 60∼77% 줄였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.721-724
• /
• 1994

This paper proposes a continuous hitting by a flexible link hammer. This hammer system is used only the first mode of vibration for a desired hitting. The input of the hammer driver for a continuous hitting is obtained from numerical solutions of two sets of non-linear simultaneous equations which satisfy the hitting conditions. Being too complicated, these numerical calculations are not useful for online processing. Therefore, the multi-layered neural networks are applied to the generation of the input patterns of the hammer driver. The trained network outputs agree well to the numerical solutions.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.63-68
• /
• 2015

Micro/nano patterns for optical concentration and diffusion have been studied in the various fields such as displays, optics, and sensors. Conventional micro patterns were continuous and linear shapes due to using linear-type light sources, however, recently non-continuous patterns have been applied as point sources are used for dot-type light sources such as LEDs and OLEDs. In this study, a hybrid machining technology combining an indentation machining method and an AAO process was developed for manufacturing the non-continuous micro patterns having nano patterns. First, mirror-like surfaces ($R_a<20nm$) of pure Aluminum substrates were obtained by optimizing cutting conditions. Then, The letter of 'K' consisting of the arrays of the micro patterns was manufactured by the indentation machining method which has a similar principle to indentation hardness testing. Finally, nano patterns were machined by AAO process on the micro patterns. Conclusively, a specific letter having nano-micro hybrid patterns was manufactured in this study.

• 복식문화연구
• /
• 제23권6호
• /
• pp.929-939
• /
• 2015

Zero-waste is sustainable development for ensuring continuous interactions with the environment as well as for the next generations, while expanding across industries. Zero-waste fashion design does not necessarily mean that we should stop making clothes in order to reduce waste, but we consider the social values of sustainability regarding the environment, humans, and profit. In particular, in the pre-use stage of zero-waste fashion design, fashion designers play critical roles. The purpose of this study is to develop a methodology for the realization of zero-waste fashion design through establishing the typology of zero-waste pattern making (ZWPM) as well as exploring the practical implications of zero-waste fashion design. For the realization of zero-waste fashion design that draws from pattern-making principals, this study categorizes zero-waste fashion design into zero-waste pattern cutting (ZWPC) and non-pattern cutting (NPC). ZWPC is based on drafting patterns on a piece of fabric, which can enable the sharing of patterns and processes, while NPC requires little- or non-cutting/sewing in optimizing a piece of fabric, bringing the possibility of creating indefinite forms. ZWPC is sub-categorized into tailored and non-tailored, and NCP into draped and folded. Then, by implementing the typology in undergraduate design programs, this study tests and completes the design methodology for the realization of zero-waste fashion design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.77-78
• /
• 2012

• 한방안이비인후피부과학회지
• /
• 제27권4호
• /
• pp.110-120
• /
• 2014

Objectives : We performed a clinical study to investigate autonomic conditions in persistent allergic rhinitis depending on various pattern identifications and the availability of heart rate variability (HRV) as a pattern identification diagnostic tool. Methods : 32 patients with persistent allergic rhinitis were asked to interview with doctor of Korean Medicine and perform the four pattern questionnaires (Cold-Heat Pattern, Phlegm Pattern, Yin Deficiency pattern, bloodstasis pattern). Then, they were examined their autonomic conditions with heart rate variability test. Results : Patients were classified as three pattern groups (Lung-stomach heat, Lung qi deficiency cold, Lung-spleen qi deficiency) by doctor. In the Lung qi deficiency cold group, Total power of the HRV (TP) and the power of the low frequency component (LF) significantly higher than in the Lung-stomach heat or Lung-spleen qi deficiency group (P < 0.05). Also, Patients were classified as 8 pattern groups (Cold/Heat, Phlegm/Non-phlegm, Yin deficiency/Non-yin deficiency, Bloodstasis/Non-bloodstasis) by four pattern questionnaires. Only in the Yin deficiency group, the power of the low frequency component (LF) significantly lower than in the Non-yin deficiency group (P < 0.05). There were not any significant differences in the rest groups. Conclusions : The result may provide that HRV doesn't reflect well the differences in the various pattern groups, and the HRV's availability is low. Continuous studies are needed to develop the objective and standardized pattern identification diagnostic tool for allergic rhinitis.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.164-172
• /
• 2019

현재 배뇨 장애를 진단할 수 있는 대표적인 임상 방법들은 침습적이고 고가이며, 장시간 연속적인 모니터링을 수행하기에는 한계가 있다. EIT는 비침습적 방법으로 외부 전극을 통하여 전류를 주입하고 유기된 전압을 측정하여 내부 전기적(임피던스) 특성을 영상화 하는 기술로써, 저렴한 비용으로 방광의 상태를 모니터링 할 수 있는 유용한 기법이 될 수 있다. 전극을 통하여 주입된 전류 패턴에 따라 측정전압 데이터의 신호특성이 달라지고 영상 복원 성능에 영향을 미친다. 본 논문에서는 인체 하복부 부근에 위치한 방광의 크기 변화에 대한 민감도가 극대화될 수 있는 모델링을 위해 입력전류 패턴에 따른 영상 복원 성능을 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권11호
• /
• pp.4310-4330
• /
• 2020

With the continuous emergence of new applications and cyberattacks and their frequent updates, the need for automatic protocol reverse engineering is gaining recognition. Although several methods for automatic protocol reverse engineering have been proposed, each method still faces major limitations in extracting clear specifications and in its universal application. In order to overcome such limitations, we propose an automatic protocol reverse engineering method using a two-pathway model based on a contiguous sequential pattern (CSP) algorithm. By using this model, the method can infer both command-oriented protocols and non-command-oriented protocols clearly and in detail. The proposed method infers all the key elements of the protocol, which are syntax, semantics, and finite state machine (FSM), and extracts clear syntax by defining fine-grained field types and three types of format: field format, message format, and flow format. We evaluated the efficacy of the proposed method over two non-command-oriented protocols and three command-oriented protocols: the former are HTTP and DNS, and the latter are FTP, SMTP, and POP3. The experimental results show that this method can reverse engineer with high coverage and correctness rates, more than 98.5% and 99.1% respectively, and be general for both command-oriented and non-command-oriented protocols.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1016-1026
• /
• 1996

The purpose of this study was to extract protypes from features and concrete images of Lotus and Crane patterns. A qualitative and a quantitative methods were used. Qualitative informations were obtained from depth Interviews for pattern selection and feature extraction, and quantitative informations from a quail-experiment for pattern caregorization. The subjects were 20 female design students and non-design, students in Teajon. The results were summerized into a similarity metrix which was interpreted by the cluster analysis and the multi-dimensional scling(MDS). The patterns for the study were grouped into 8 clusters. Four dimensions were chosen for the MDS. The location of each pattern was visualized in a 2-dimesional spaces and the location of each cluster in a 3-dimensional spaces. The first dimension, "Lotus" vs "Crane" refired to pattern types, and the second dimension, "realistic" vs "transformable", the transformability. The third dimension, "simple" vs "complex", refired to the degree of simplification, and the forth dimension, "continuous" vs "discontinuous", continuity. The results of the Quantitative analysis could be summerized into 3-level prototype hiararchy In the first level, the patterns were devided clearly into two groups. Lotus and Crane by pattern types. In the second levelk, each group was devided into twosubgroups by continuity. In the third, each subgroup was divided into four subgroups by transformability and the degree of simplification. Four protypes, the final targets of the present study, were extracted from the third level. The are Stylized, Realistic, Decorative, Abstract types.d from the third level. The are Stylized, Realistic, Decorative, Abstract types.