• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.65-71
• /
• 2007

The purpose of this study was to investigate variability of kinematic factors affecting the record in women's javelin throwing. For this study, 8 female-javelin thrower participated in this experiment. The three digital video cameras (Sony, 120x) were used to record motions. Kwon3D 2.1 was used to process data and they were analyzed with Excell for factors. The sampling rate of a camera was 60Hz and shutter speed of a camera was 1/1000sec. The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 6Hz. The results were as follows: 1. From cross step to landing of delivery, the average velocities of CoM of non-dominant athletes were greater than dominant athletes and those of CoM of non-dominant athletes less than dominant athletes, but at release dominant athletes had a lower average velocity and a variability than non-dominant athletes. 2. From cross step to landing of delivery, the average throwing velocities and variabilities of a javelin of dominant athletes were greater than dominant athletes, but at release, dominant athletes had a higher velocity than dominant athletes and had a equal variability. 3. At every events, a forward or backward angles and variabilities of non-dominant athletes were greater than dominant athletes. 4. From cross step to landing of delivery, dominant athletes' elbow average angles were greater than non-dominant athletes and the variabilities of latter less than non-dominant athletes, but at release dominant athletes' variabilities were smaller than non-dominant athletes. 5. At landing of delivery, dominant athletes' knee average angles and variabilities of a supporting foot were a greater than non-dominant athletes, and at release, dominant athletes' knee average angles was a greater but variabilities less than non-dominant athletes. In conclusion, the dominant threw javelins fast while having stable postures and the range of elbow's angle large.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.203-211
• /
• 2013

Purpose: When we look at the object, we used the dominant eye mainly. For this reason, a prescription of the dominant eye is an important factor for glasses and contact lenses. This study evaluated visual acuity differences between dominant and nondominant eyes through analyzing refractive power changes in both eyes by the ages. Methods: This study was performed to investigate the relationship between refractive error and dominant eye which had the superiority in the function of binocular. 186 subjects without ocular disease were examined on the dominant eye. The dominant eye was examined by the Hole-in-the-card test. For the consistency of the measurements, we tested refractive power in three times by the same person. Results: Using SPSS, the relationship between vision and the dominant eye was analyzed. 135 people of the whole subjects have the dominant eye on right. The Number of the non-dominant eye is 51. We were divided into 3 types, the group under the age of 10 that begins to expose environment factor affect on vision (the average age $8.8{\pm}1.18$) and the age group of 10 to 20 that begins to change refractive power in earnest (the average age $14.1{\pm}2.58$) and the group after the age 20 that began to stabilize vision (the average age $51.8{\pm}17.51$). The visual acuity of dominant eye was higher than non-dominant eye in all age groups. Nevertheless, these results were not statistically significant. Mean astigmatism of dominant eye was smaller than the non-dominant eye, and this is significant, statistically (p=0.017<0.05). Conclusions: It is expected that the balanced eye with a lower level of astigmatism has a more possibility become a dominant eye.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.161-168
• /
• 2010

A series of fatigue tests have been performed on the non-load carrying fillet welded joints in order to quantitatively assess the fatigue characteristics due to the grindings and TIG(Tungsten Inert Gas) welding treatments. From the results of fatigue tests, it has been shown that the fatigue strengths at $2{\times}106$ load cycles were improved in the case of the grinding sand TIG welding treatments, and we could know that it is satisfying fatigue strength prescribed in fatigue design standard in general. Besides, from the results of fracture mechanics approaches, the geometric shape correction factors were the most dominant factors in the initial fatigue crack growth, but as the fatigue crack develops, the finite plate correction factor were became the most dominant factor, and the fatigue life on non-load carrying fillet welded joints could be relatively exactly estimated by using the relations between fatigue crack growth rate and stress intensity factor obtained from finite element analysis and existing proposed formulae.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2010

The multiple regression analysis and path analysis in each dominant area of noise source are conducted to analyze the relationship between dependent variables like annoyance and independent ones such as noise and non-noise factors. The multiple regression analysis shows that impact of noise factors is the highest to annoyance in dominant areas of road traffic and railway noise. Meanwhile, impact of non-noise factors such as sensitivity and satisfaction of environment on annoyance is also high in these areas. The path analysis result for multivariate analysis between various independent and dependent variables is similar to that of the multiple regression analysis. However, noise factor is the greatest factor influent on annoyance in the dominant areas of the combined noise, and relationship between annoyance and sensitivity is the highest in combined area exposed to road traffic noise and railway noise.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.325-331
• /
• 2010

Categorical perception has been noted as characteristic properties of linguistic stimuli. In this study, Korean monosyllabic minimal pairs (consonant-vowel-consonant, CVC) were analyzed to understand perception boundaries between clinically confusing words. An efficient scheme has been developed to systematically synthesize temporal transition waveforms (11 steps) from one word to the target word for the pairs of /gom/-/gong/, /non/-/noon/, and /don/-/non/. The corresponding slopes, widths, and non-dominant factors of perception boundaries were analyzed for the total of 40 young normal subjects (20 males and 20 females). Results showed that there were relative pattern differences among confusing monosyllabic minimal pairs under categorical perception. For instance, the vowel difference within CVC pairs led to the lowest boundary performance in this experiment set. Data also indicated the potential application of the overall procedure for evaluating auditory functions and assisting rehabilitation programs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.93-98
• /
• 2008

We investigated the effect of process temperature on removal rate and non-uniformity based on single head kinematics in oxide CMP. Generally, it has been known that the temperature profile directly transfers to the non~uniformity of removal rate on the wafer, which has similar tendency with the sliding distance of wafer. Experimental results show that platen velocity is a dominant factor in removal rate as well as average temperature. However, the non-uniformity does not coincide between process temperature and removal rate, due to slurry accumulation and low deviation of temperature. Resultantly, the removal rate is strongly dependent on the rotational speed of platen, and its non -uniformity is controlled by the rotational speed of polishing head. It means lower WIWNU (With-in-wafer-non-uniformity) can be achieved in the region of higher head speed.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.591-599
• /
• 2020

This study examines how the health of the banks in ASEAN-3 countries namely Indonesia, Malaysia and Thailand respond to the change in exchange rates and foreign interest rates in four large economies. The transmissions of the two external factors through domestic factors in each ASEAN-3 countries eventually affects Non-Performing Loan (NPL) of commercial banks. This study uses the monthly time series data and the renowned Structural Vector Autoregressive (VAR) model comprising five variables, namely exchange rate, foreign interest rate, domestic interest rate, money supply, and non-performing loan (NPL). The results indicate that there are different effects between ASEAN-3 countries, which can be classified as short-run effect and long-run effect. In the long run effect, external factors have a dominant role in determining NPL in ASEAN-3 countries. Yuan has the biggest effect on Malaysia's NPL, while Indonesia is more affected by European interest rates rather than the fluctuation of the US currency and China's interest rates. Among ASEAN-3 countries, Malaysia is the one that is the most vulnerable to external factors. While Thailand's NPL is affected dominantly by domestic factors. This study shows that the Fed Funds Rate (US official interest rate) is not always the dominant factor affecting the health of domestic banks in ASEAN-3.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.235-240
• /
• 2006

In order to enhance receive sensitivity in noisy environment, the previous initial synchronization method of GPS receiver for reference stations adopts not only the coherent integration method but also the non-coherent integration method. However, the previous GPS initial synchronization method causes the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this pa-per, a GPS initial synchronization method is proposed to enhance receive sensitivity of GPS receiver for reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent integration loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much fewer than that of the previous GPS initial synchronization method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.691-695
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, MgCl$_2$are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1785-1787
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, $MgCl_2$ are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.