• 한국운동역학회지
• /
• 제17권4호
• /
• pp.65-71
• /
• 2007

The purpose of this study was to investigate variability of kinematic factors affecting the record in women's javelin throwing. For this study, 8 female-javelin thrower participated in this experiment. The three digital video cameras (Sony, 120x) were used to record motions. Kwon3D 2.1 was used to process data and they were analyzed with Excell for factors. The sampling rate of a camera was 60Hz and shutter speed of a camera was 1/1000sec. The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 6Hz. The results were as follows: 1. From cross step to landing of delivery, the average velocities of CoM of non-dominant athletes were greater than dominant athletes and those of CoM of non-dominant athletes less than dominant athletes, but at release dominant athletes had a lower average velocity and a variability than non-dominant athletes. 2. From cross step to landing of delivery, the average throwing velocities and variabilities of a javelin of dominant athletes were greater than dominant athletes, but at release, dominant athletes had a higher velocity than dominant athletes and had a equal variability. 3. At every events, a forward or backward angles and variabilities of non-dominant athletes were greater than dominant athletes. 4. From cross step to landing of delivery, dominant athletes' elbow average angles were greater than non-dominant athletes and the variabilities of latter less than non-dominant athletes, but at release dominant athletes' variabilities were smaller than non-dominant athletes. 5. At landing of delivery, dominant athletes' knee average angles and variabilities of a supporting foot were a greater than non-dominant athletes, and at release, dominant athletes' knee average angles was a greater but variabilities less than non-dominant athletes. In conclusion, the dominant threw javelins fast while having stable postures and the range of elbow's angle large.

• 한국안광학회지
• /
• 제18권2호
• /
• pp.203-211
• /
• 2013

목적: 양안으로 사물을 주시할 때 우세안을 주로 사용한다. 이러한 이유로 안경과 콘택트렌즈 처방 시 우세안의 중요성이 크다. 이를 위해 본 연구는 연령대별로 구분하여 양안에 있어서 굴절력의 변화에 따른 우세안과 비우세안의 시력 차이가 있는지 알아보았다. 방법: 안질환이 없는 186명을 대상으로 Hole-in-the-card test법을 통한 우세안을 검사하였다. 검사의 일관성을 위해 동일인이 측정하였으며, 검사의 신뢰성을 높이기 위해 3회 반복 실시하였다. Spss통계를 통해 굴절력에 따른 우세안과 비우세안의 상관관계를 알아보았다. 결과: 대상자 186명 중 우안 우세안은 135명, 좌안 우세안은 51명이었다. 굴절이상 환경에 노출되기 시작하는 10세 이전(평균 $8.8{\pm}1.18$세)과 본격적으로 굴절이상이 발생하는 10세에서 20세 사이(평균 $14.1{\pm}2.58$세), 그리고 시력안정화 시기에 접근하는 20세 이후(평균 $51.8{\pm}17.51$) 모두 우세안의 시력이 비우세안보다 시력이 높았지만 통계적으로 유의하지 않았다. 근시성 난시에 있어서 우세안의 난시 굴절력 평균값이 비우세안 난시안의 평균값보다 작게 나타났으며, 통계적으로 유의한 결과를 나타내었다(p=0.017<0.05). 결론: 양안 중에서 전체적으로 난시도가 작고 균형 잡힌 눈이 우세안으로 선택될 확률이 높다고 판단된다.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.161-168
• /
• 2010

A series of fatigue tests have been performed on the non-load carrying fillet welded joints in order to quantitatively assess the fatigue characteristics due to the grindings and TIG(Tungsten Inert Gas) welding treatments. From the results of fatigue tests, it has been shown that the fatigue strengths at $2{\times}106$ load cycles were improved in the case of the grinding sand TIG welding treatments, and we could know that it is satisfying fatigue strength prescribed in fatigue design standard in general. Besides, from the results of fracture mechanics approaches, the geometric shape correction factors were the most dominant factors in the initial fatigue crack growth, but as the fatigue crack develops, the finite plate correction factor were became the most dominant factor, and the fatigue life on non-load carrying fillet welded joints could be relatively exactly estimated by using the relations between fatigue crack growth rate and stress intensity factor obtained from finite element analysis and existing proposed formulae.

• 한국소음진동공학회논문집
• /
• 제20권2호
• /
• pp.172-178
• /
• 2010

The multiple regression analysis and path analysis in each dominant area of noise source are conducted to analyze the relationship between dependent variables like annoyance and independent ones such as noise and non-noise factors. The multiple regression analysis shows that impact of noise factors is the highest to annoyance in dominant areas of road traffic and railway noise. Meanwhile, impact of non-noise factors such as sensitivity and satisfaction of environment on annoyance is also high in these areas. The path analysis result for multivariate analysis between various independent and dependent variables is similar to that of the multiple regression analysis. However, noise factor is the greatest factor influent on annoyance in the dominant areas of the combined noise, and relationship between annoyance and sensitivity is the highest in combined area exposed to road traffic noise and railway noise.

• 한국음향학회지
• /
• 제29권5호
• /
• pp.325-331
• /
• 2010

청각 범주지각 (categorical perception)은 언어적 자극과 관련되어 나타나는 특징적 현상이다. 본 연구에서는 임상적으로 혼돈되기 쉬운 한국어 초성, 중성, 종성 최소대랍쌍의 지각경계에 관한 분석을 하였다. 이를 위해서 단음절어 최소대립쌍(consonant-vowel-consonant, CVC)인 /곰-공/, /논-눈/, /돈-논/을 물리적 에너지 관점에서 11가지 단계 (index)로 구분하여 변환하였다. 그리고, 정상 성인 (40명)을 대상으로 하여 지각경계 패턴, 지각경계 기울기, 지각경계 폭, 비우위 지수(non-dominant factor) 분포를 분석하였다. 이 결과에서 대립쌍들은 범주지각 과정에서 대립쌍 상호간에서 상대적인 차이가 있음을 보여 주었다. 본 자료에서는 중성 최소대립쌍의 경우가 범주지각이 가장 낮게 나타났으며, 이러한 분석 과정이 청각기능 평가 등에 응용 가능성이 있음을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.93-98
• /
• 2008

We investigated the effect of process temperature on removal rate and non-uniformity based on single head kinematics in oxide CMP. Generally, it has been known that the temperature profile directly transfers to the non~uniformity of removal rate on the wafer, which has similar tendency with the sliding distance of wafer. Experimental results show that platen velocity is a dominant factor in removal rate as well as average temperature. However, the non-uniformity does not coincide between process temperature and removal rate, due to slurry accumulation and low deviation of temperature. Resultantly, the removal rate is strongly dependent on the rotational speed of platen, and its non -uniformity is controlled by the rotational speed of polishing head. It means lower WIWNU (With-in-wafer-non-uniformity) can be achieved in the region of higher head speed.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.591-599
• /
• 2020

This study examines how the health of the banks in ASEAN-3 countries namely Indonesia, Malaysia and Thailand respond to the change in exchange rates and foreign interest rates in four large economies. The transmissions of the two external factors through domestic factors in each ASEAN-3 countries eventually affects Non-Performing Loan (NPL) of commercial banks. This study uses the monthly time series data and the renowned Structural Vector Autoregressive (VAR) model comprising five variables, namely exchange rate, foreign interest rate, domestic interest rate, money supply, and non-performing loan (NPL). The results indicate that there are different effects between ASEAN-3 countries, which can be classified as short-run effect and long-run effect. In the long run effect, external factors have a dominant role in determining NPL in ASEAN-3 countries. Yuan has the biggest effect on Malaysia's NPL, while Indonesia is more affected by European interest rates rather than the fluctuation of the US currency and China's interest rates. Among ASEAN-3 countries, Malaysia is the one that is the most vulnerable to external factors. While Thailand's NPL is affected dominantly by domestic factors. This study shows that the Fed Funds Rate (US official interest rate) is not always the dominant factor affecting the health of domestic banks in ASEAN-3.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.235-240
• /
• 2006

In order to enhance receive sensitivity in noisy environment, the previous initial synchronization method of GPS receiver for reference stations adopts not only the coherent integration method but also the non-coherent integration method. However, the previous GPS initial synchronization method causes the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this pa-per, a GPS initial synchronization method is proposed to enhance receive sensitivity of GPS receiver for reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent integration loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much fewer than that of the previous GPS initial synchronization method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.691-695
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, MgCl$_2$are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1785-1787
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, $MgCl_2$ are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.