• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.323-324
• /
• 2013

This paper presents a simple and cost-effective stand-alone rapid battery charging system of 30kW for electric vehicles. The proposed system mainly consists of active front-end rectifier of neutral point clamped 3-level type and non-isolated bi-directional dc-dc converter of multi-phase interleaved half-bridge topology. The charging system is designed to operate for both lithium-polymer and lithium-ion batteries. The complete charging sequence is made up of three sub-interval operating modes; pre-charge mode, constant-current mode, and constant-voltage mode. The pre-charge mode employs the stair-case shaped current profile to accomplish shorter charging time while maintaining the reliable operation of the battery. The proposed system is specified to reach the full-charge state within less than 16min for the battery capacity of 8kWh by supplying the charging current of 78A. Owing to the simple and compact power conversion scheme, the proposed solution has superior module-friendly mechanical structure which is absolutely required to realize flexible power expansion capability in a very high-current rapid charging system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.4
• /
• pp.228-235
• /
• 2007

The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.

• Journal of agricultural medicine and community health
• /
• v.34 no.1
• /
• pp.58-66
• /
• 2009

Objectives: Active participation of poultry breeder in surveillance system of Avian Influenza (AI) is very important. Therefore this study was conducted to present basis data for active report of AI that is affected by media's coverage in poultry breeder. Methods: Subjects were 88 persons, 28 who were poultry breeder at epidemic area of AI and 60 who were general person at non-epidemic area. Data were collected by the trained investigator from Jul. 1 to Aug. 31, 2008. Respondents were interviewed by means of a structured questionnaire. Results: The third-person effect among perceptions of influence in media's report on the AI was higher in breeder (32.1%) than in non-breeder (10.0%). However, Confidence to media report on the AI was lower in breeder than in non-breeder. Intention to report of the AI was 71.4% in breeder respectively, was 90.0% in non-breeder. There was statistically significant lower in breeder than non-breeder. The cause of avoidance of report was 'economic damage' for 87.5%, which acocounted for the majority of cases. Confidence to media report on the AI were positively correlated with concern on the AI and perception on seriousness of the AI, but negatively correlated with the third-person effect. Conclusions: These results showed that intention to report of the AI of breeder was susceptible to influenced by the third person effect and confidence in media's report on the AI. Therefore we should give a special attention to increase active report of poultry breeder during epidemic period of AI which is consideration of reasonable strategy of media's coverage, including mind and emotion state of poultry breeder.

• Convergence Security Journal
• /
• v.22 no.5
• /
• pp.127-134
• /
• 2022

Although the Korea National Guard(KNG) has a short history, it has a great meaning in that it is the first of the Korean reserve forces system. Research on the KNG has been passively conducted so far. Even so, the research conducted was limited to a fragmentary description from a historical point of view and did not identify the characteristics of the KNG. Therefore, in this study, after examining the background of the times when the KNG existed, we tried to identify the characteristics of the KNG from a new perspective from legal, institutional, military, and political perspectives. In summary, the KNG was born as an efficient system in preparation for war while receiving legal support. In addition, the adoption of the volunteer army system, a recruiting system of advanced countries, the fact that officers were trained through a separate military academy unique to the KNG, and that they contributed to rear area operations are highly evaluated from a military standpoint. On the other hand, it is negative that politicians and non-military groups colluded from the process of establishing the KNG. Finally, with this study as an opportunity, it is hoped that research on the reserve force that existed before the Korean War will become more active.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.25-33
• /
• 1986

In this paper, the frontal method based elastic-plastic F.E.M. program for mini-computer was developed. Since, the executable source program size was restricted by the system core memory size on the mini-computer, the active variables were memorized by the element base and the nonactive varables were memorized to the external disc file. The active variables of the finally developed program were reduced enough to execute about 1,000 freedom finite element on the mini-computer on which available variables were restricted as 32,767 integers. A modified CT fracture test specimen was examined to test the developed program. The calculated results were compared with experimental results concerning on the crack tip plastic deformation zone. Recrystallization technique was adopted to visualize the intensive plastic deformation regions. The Von-Mises criterion based calculation results were well agreed with the experimental results in the intensive plastic region which was over than 2% offset strain. The F.E.M. results using the developed program were well agreed with the theoritical plastic boundary which was calculated by the stress intensity factor as r$_{p}$=(K$_{1}$$^{2}$/2.pi..sigma.$_{y}$$^{2}$).f(.theta.).).).

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.41-50
• /
• 2008

Purpose: Bone morphogenetic protein-2(BMP-2) has been shown to possess significant osteoinducitve potential. There have been attempts to overcome a limitation of mass production, and economical efficiency of BMP. The aim of this study was to produce recombinant human BMP-2(rhBMP-2) from E. coli in a large scale and evaluate its biological activity. Materials and Methods: The E.coli strain BL21(DE3) was used as a host for rhBMP-2 production. Dimerized rhBMP-2 was purified by affinity chromatography using Heparin column. To determine the physicochemical properties of the rhBMP-2 expressed in E. coli, we examined the HPLC profile and performed Western blot analysis. The effect of the purified rhBMP-2 dimer on osteoblast differentiation was examined by alkaline phosphatase (ALP) activity and representing morphological change using C2C12 cell. Results: E. coli was genetically engineered to produce rhBMP-2 in a non-active aggregated form. We have established a method which involves refolding and purifying a folded rhBMP-2 dimer from non-active aggregates. The purified rhBMP-2 homodimer was characterized by SDS-PAGE as molecular weight of about 28kDa and eluted at 34% acetonitrile, 13.27 min(retention time) in the HPLC profile and detected at Western blot. The purified rhBMP-2 dimer stimulated ALP activity and induced the transformation from myogenic differentiation to osteogenic differentiation. Conclusion: rhBMP-2 was produced in E. coli using genetic engineering. The purified rhBMP-2 dimer stimulated ALP activity and induced the osteogenic differentiation of C2C12 cells.

• Korean journal of communication and information
• /
• v.36
• /
• pp.348-373
• /
• 2006

In the era of digital media, one of the most distinctive characteristics is the activity what audience play. This characteristic can be particularly demonstrated in the case of PPV(Pay-Per-View) use. Since this service is related with payment by audience according to each behaviour of their own media use. In doing so, this paper explores the characteristics and behavioral pattern in PPV use. In particular, the study tries to predict from the result that which trait of characteristic can explain the adoption of PPV. The analytical result shows that PPV users are much more active in gathering information as well as achieving the diversity in terms of program choice compared to non PPV users. At the same time, PPV users are prone to be unsatisfied against the other media and naturally willing to adopt the new media. PPV users are much more keen to use toward age related programme classification system in order to protect their children from inappropriate programmes. The variable of participational behaviour is the most relevant variable to predict the degree of PPV use, however, it fails to predict to distinguish the PPV users group from non PPV users group. It maybe given as a conclusion that PPV users are much more active in not only choosing their own program they like to watch but also planning ahead for maximising their pleasure from viewing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.225-234
• /
• 2019

By using the Triboelectric nanogenerators, known as TENG, we can take advantages of high conversion efficiency and continuous power output even with small vibrating energy sources. Nonlinear energy extraction techniques for Triboelectric vibration energy harvesting usually requires synchronized active electronic switches in most electronic interface circuits. This study presents a nonlinear energy harvesting with high energy conversion efficiency to harvest and save energies from human active motions. Moreover, the proposed design can harvest and store energy from sway motions around different directions on a horizontal plane efficiently. Finally, we conducted a comparative analysis of a multi-mode energy storage board developed by a silicon-based piezoelectricity and a transparent TENG cell. As a result, the experiment showed power generation of about 49.2mW/count from theses multi-fully harvesting source with provision of stable energy storages.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.531-538
• /
• 2021

In this study, the TOC in six estuarine reservoirs in the West Sea (Ganwol, Namyang, Daeho, Bunam, Sapkyo, and Asan) was estimated using optically-active water quality factors by the water environment monitoring network. First, specification data and land use maps of each estuarine reservoir were collected. Subsequently, water quality data from 2013 to 2020 were collected. The data comprised of 11 parameters: pH, dissolved oxygen, BOD, COD, suspended solids (SS), total nitrogen, total phosphorus, water temperature, electrical conductivity, total coliforms, and chlorophyll-a (Chl-a). The TOC in the estuarine reservoirs was 4.9~7.0 mg/L, with the highest TOC of 7.0 mg/L observed at the Namyang reservoir, which has a low shape coefficient and high drainage density. The correlation of TOC with water quality factors was also analyzed, and the correlation coefficients of Chl-a and SS were 0.28 and 0.19, respectively, while the correlation coefficients of these factors in the Namyang reservoir were 0.42 and 0.27, respectively. To improve the estimation of TOC using Chl-a and SS, the TOC was averaged in 5 mg/L units, and Chl-a and SS were averaged. Correlation analysis was then performed and the R² of Chl-a-TOC was 0.73. The R² of SS-TOC was 0.73 with a non-linear relationship. TOC had a significant non-linear relationship with Chl-a and SS. However, the relationship should be assessed in terms of the spatial and temporal variations to construct a reliable remote sensing system.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.114-120
• /
• 1997

For compensating the error motion of hydrostatic tables, we have introduced a way that the clearance of table is controlled corresponding to the amount of eror with the actively controlled variable capillary, named as ACC. In previous paper, through the basic test, it was confirmed that by the use of ACC, the error motion within 2.7$\mu$ m of a hydrostatic table could be compensated with the resolution of 27nm, 1/100 contollable range, and with the frequency bandwidth of 5.5Hz, structurally. In this paper, we performed practical compensation of the linear and angular motion error of hydrostatic table using ACC. For improving the compensated motion accuracy, iterative control method is put into the control system. The experimental results show that by the simultaneous compensation of error, the linear and angular motion error are improved upto 0.25$\mu$ m and 0.4arcsec, which are about 1/10 and 1/3 of the non-compensated motion errors respectively.