• Composites Research
• /
• v.36 no.5
• /
• pp.297-302
• /
• 2023

There are several methods for shaping foams, but the most commonly used methods involve the use of resin mixed with a foaming agent, which is then foamed under high temperature and pressure in the case of compression foaming, or foamed under high temperature without applying pressure in the case of atmospheric foaming. The polymers used for foaming require design and analysis of optimal foaming conditions in order to achieve foaming under ambient pressure. Environmentally friendly bio-based polymers face challenges when it comes to foaming on their own, which has led to ongoing research in blending them with resins capable of traditional foam production. This study investigates changes in the characteristics of bio-based polymer-EVA blend foams based on variations in the content of bio-based polymers and explores the optimal foaming conditions according to crosslinking. The correlation between foaming characteristics and mechanical properties of the foams was examined. Through this research, we gained insights into how the content of bio-based polymers affects the properties of foams containing bio-based polymers and identified differences between ambient pressure and high-pressure foaming processes. Additionally, the feasibility of commercializing bio-based polymer-EVA composite foams was confirmed.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.195-207
• /
• 2006

The recently published and new results on design and fabrication of magnetophotonic crystals of different dimensionality are surveyed. Coupling of polarized light to 3D photonic crystals based on synthetic opals was studied in the case of low dielectric contrast. Transmissivity of opals was demonstrated to strongly depend on the propagation direction of light and its polarization. It was shown that in a vicinity of the frequency of a single Bragg resonance in a 3D photonic crystal the incident linearly polarized light excites inside the crystal the TE- and TM-eigen modes which passing through the crystal is influenced by Brags diffraction of electromagnetic field from different (hkl) sets of crystallographic planes. We also measured the faraday effect of opals immersed in a magneto-optically active liquid. It was shown that the behavior of the faraday rotation spectrum of the system of the opal sample and magneto-optically active liquid directly interrelates with transmittance anisotropy of the opal sample. The photonic band structure, transmittance and Faraday rotation of the light in three-dimensional magnetophotonic crystals of simple cubic and face centered cubic lattices formed from magneto-optically active spheres where studied by the layer Korringa-Kohn-Rostoker method. We found that a photonic band structure is most significantly altered by the magneto-optical activity of spheres for the high-symmetry directions where the degeneracies between TE and TM polarized modes for the corresponding non-magnetic photonic crystals exist. The significant enhancement of the Faraday rotation appears for these directions in the proximity of the band edges, because of the slowing down of the light. New approaches for one-dimensional magnetophotonic crystals fabrication optimized for the magneto-optical Faraday effect enhancement are proposed and realized. One-dimensional magnetophotonic crystals utilizing the second and the third photonic band gaps optimized for the Faraday effect enhancement have been successfully fabricated. Additionally, magnetophotonic crystals consist of a stack of ferrimagnetic Bi-substituted yttrium-iron garnet layers alternated with dielectric silicon oxide layers of the same optical thickness. High refractive index difference provides the strong spatial localization of the electromagnetic field with the wavelength corresponding to the long-wavelength edge of the photonic band gap.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.73-76
• /
• 2011

Purpose: Congenital midline upper lip sinus is a rare lesion. There are two postulates that can account for the formation of the upper lip sinus based on two major theories of the development of the face: the fusion theory and the merging theory. However, congenital midline lower lip sinus is very rarely reported and described. We report a case of a congenital midline sinus of the lower lip in a 6-year-old female. Methods: A 6-year-old girl presented with a nipple like swelling on the midline lower lip. Physical examination revealed about $5{\times}5$ mm protruding round mass with a just small opening that was non-tender to palpation. The mass was not associated with any skin changes. It umbilicated at the apex and contains a fistulous tract, discharging clear fluid. Only, simple radiologic finding shows bony spur on the lower one third of mandibular symphsis. Results: A small transverse ellipse is made around the opening and elevated mass with sharpe dissection. The tract is excised using the probe and dye as the guide. The tract was extended to periosteum of the lower one third of the mandible. The tract and involved periosteum were excised en bloc, and removed protrusion of the mandibular bone using diamond burr. Microscopic examination of the resected sinus revealed the fistulous tract itself, consisting of fibrous connective tissue covered with cornified stratified squamous epithelium, was observed in the center of the sample. In 6 months follow-up, This patient had a good result was obtained by the method of fistulectomy alone. Conclusion: Midline cranoifacial fistulas represent rare lesions resulting from abnormal fusion of embryologic structures. Our case report describes the excision of a congenital midline sinus of the lower lip in a 6-year-old female. This case represents the first report of a lower lip sinus presenting in a girl as a mass in the skin of the chin with extension to the midline of the mandible. However, the etiology of this rare congenital sinus remains obscure.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.108-114
• /
• 1993

This paper presents a study on the effects of silica coating in the production of ${\gamma}-Fe_{2}O_{3}$ powders suitable for magnetic recording media. Emphasis has been put on investigating the relationship between the powder characteristics and the effects of silica coating in the heat-treatment stage of ${\gamma}-Fe_{2}O_{3}$ production. After we prepared non-coated ${\gamma}-Fe_{2}O_{3}$ and silica coated ${\gamma}-Fe_{2}O_{3}$ with coating water glass on the surface of goethite and heattreatment process, we compared and investigated powder characteristics. As silica coated layer played a role of preventing the powders from overreduction to metal iron and rapid oxidation, silica coated ${\gamma}-Fe_{2}O_{3}$ showed superior magnetization value due to inhibiting t!1e adulteration of ${\alpha}-Fe_{2}O_{3}$ into the final product. When silica coated layer acted as a sintering restrainer, silica coated ${\gamma}-Fe_{2}O_{3}$ showed high coercivity and specific sur-face area due to good acicularity.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.209-217
• /
• 2010

Recently, some mathematical models for the prediction on progress of carbonation of concrete were reported. These models take account for $CO_2$ diffusion and chemical reaction between $Ca(OH)_2$ and $CO_2$. Based on the assumption that $CO_2$ diffuses in the carbonation zone and reacts with $Ca(OH)_2$ at the outer face of carbonation zone and non-carbonation zone. In this study, a mathematical model to predict the progress of carbonation of concrete has been established based on the reducing concentration of $Ca(OH)_2$ in the carbonation progress zone, where $Ca(OH)_2$ reacts with $CO_2$ and $Ca(OH)_2$ and $CaCO_3$ coexist. Also, the prediction model of carbonation progress rate of concrete using the air permeability coefficient regarding to $CO_2$ diffusion is developed. As a result of this study, an expression, the model equation is obtained for the prediction of carbonation based on the time and interaction velocity between $CO_2$ and Ca(OH)$_2$ dependent air permeability coefficient. The prediction by the model satisfied the experimental data of the accelerated carbonation for painted concrete. Consequently, the model can predict the rate of carbonation and the potential service life of concrete structure exposed to atmosphere.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.28-35
• /
• 2012

Rainfall is widely recognized as a major landslide-triggering factor. Most of the latest landslides that occurred in South Korea were caused by short-duration heavy rainfall. However, the relationship between rainfall characteristics and landslide occurrence is poorly understood. To examine the effect of rainfall on landslide occurrence, cumulative rainfall(mm) and rainfall intensity(mm/hr) of serial rain and antecedent rainfall(mm) were analyzed for 18 landslide events that occurred in the southern and central regions of South Korea in June and July 2011. It was found that all of these landslides occurred by heavy rainfall for one or three days, with the rainfall intensity exceeding 30 mm/hr or with a cumulative rainfall of 200 mm. These plotted data are beyond the landslide warning criteria of Korea Forest Service and the critical line of landslide occurrence for Gyeongnam Province. It was also found that the time to landslide occurrence after rainfall start(T) was shortened with the increasing average rainfall intensity(ARI), showing an exponential-decay curve, and this relation can be expressed as "T = $94.569{\cdot}exp$($-0.068{\cdot}ARI$)($R^2$=0.64, p<0.001)". The findings in this study may provide important evidences for the landslide forecasting guidance service of Korea Forest Service as well as essential data for the establishment of non-structural measures such as a warning and evacuation system in the face of sediment disasters.

• 한국사회정책
• /
• v.24 no.2
• /
• pp.1-29
• /
• 2017

This study compares and analyzes precarious labor market in Korea and Japan in terms of gender and occupational class. Previous studies have analyzed precarious labor limited to the level of employment type such as non-standard workers. This study reconceptualizes precarious labor in terms of the combination of employment relations and income level. In addition. we analyzed whether there are differences in the characteristics of precarious labor between Korea and Japan. In order to analyze the labor market precariousness in Korea. we used data from the 17th Korea Labor Panel Survey (2014) and for Japan. we used the 9th (2012) data from the Keio Household Panel Survey. As a result. we could confirm the feminization of labor market precariousness and horizontal division by occupation in both Korea and Japan. Also. ordered logistic regression analysis showed that the more women. and those in their 60s or older. the less skilled service workers. or the manufacturing workers are likely to face labor market instability in both Korea and Japan. The results of this analysis reflect the fact that Korea and Japan have experienced similar changes in the labor market structure with institutionalized employment protection system based on male workers.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.139-175
• /
• 2017

The Assembly plenary session on December 3, 2017 passed a Product Liability Amendment bill that introduced clauses concerning consumer burden of proof and punitive damage reimbursement. More specifically, these newly approved provisions will reduce the burden of proof placed on consumers and levy triple punitive damage on suppliers. Significant increases in the number of product-liability lawsuit and the number of related insurance contracts are expected. Since military aircraft are designed for operational purpose(seeking greater combat effectiveness over greater safety) and used in high-risk environment, it is practically impossible to obtain an affordable product-liability insurance, Without having any backup plan, military aircraft manufacturers directly face all sort of liability risks under Product Liability Act, Warrant Liability Act and Non-Performance of Contract Act. The U.S. experienced similar problems when they first implemented their product-liability law in 1970s. There had been a big dispute among legal practitioner, insurance professionals and scholars concerning military aircraft manufacturer's liability. In order to settle the issue, the U.S. Supreme Court has established a new precedent of Government Contractor Defense(GCD). The U.S. government also included an indemnity clause for military aircraft manufacturers in their FMS Contract with the Korean government. Likewise, Korean military aircraft manufacturers should 1) clearly understand their current position that they cannot afford expensive product-liability insurance and the cost is not accounted in the military procurement calculation, 2) estimate potential liability risks with the ongoing overseas export expansion in mind, 3) set up appropriate risk management measures through regulatory reform and policy development.

• Journal of Chest Surgery
• /
• v.31 no.6
• /
• pp.598-603
• /
• 1998

Excessive sweating of the palms, axillae, and face has a strong negative impact on the quality of life for many people. The existing non-operative therapeutic options seldom give sufficient relief and have a transient effect. But a definitive cure can be obtained by upper thoracic sympathectomy. From June 1997 to October 1997, 117 cases of the needle (2 mm) thoracoscopic thoracic sympathectomies were performed in the Department of Thoracic and Cardiovascular Surgery in the Respiratory Center Yong-dong Severance Hospital in Seoul, Korea. We have followed up on 94 cases which include palmar hyperhidrosis (n=85), facial hyperhidrosis(n=5) and axillary hyperhidrosis(n=4). There were 42 males and 52 females whose ages ranged from 14 to 63 years(median:23 years). The T2 ganglia and T3-4 ganglia were excised by electrocuting with a hook and endoscissors and were removed for histologic examination. There have been no mortalities or life-threatening complications. The surgical results were classified as excellent(much improvement,very dry) in 93.6%, good(some improvement, minimally wet) in 2.1%, and fair(slight improvement, still wet) in 4.2%. Five patients(5.3%) required closed thoracostomy drainage because of pneumothorax in the immediate postoperative day. Horner's syndrome occurred in one case. The compensatory sweating occurred in 67 cases(71.2%) and was embarrassing in 21 cases(22.3%) and disabling in 9 cases(9.6%) of these cases. Primary failure occurred in one case. The patient with primary failure underwent successful operation. Fifty-one patients had concomitant hyperhidrosis. Our experiences indicate needle thoracoscopic sympathectomy is a very effective, safe, and time- saving procedure for essential hyperhidrosis.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.798-802
• /
• 2011

Purpose: A wart is caused by epidermal infection with the human papilloma virus. Although wart naturally disappears in some cases, it require treatment because of pain, aesthetic problem, and the possibility of malignant change. Conventional non-surgical treatment cannot be a fundamental solution for the pain and has such disadvantages as frequent recurrence and difficulties in achieving a satisfactory outcome. A surgical procedure was performed on patients with wart and the procedure had a good outcome. Methods: We investigated the gender, age, lesion site, mean treatment duration, and presence or absence of recurrence in 21 patients with a wart within the period of January 2007 to July 2011. For local lesions, primary closure, including subcuticular suture after the excision, was performed. If the defect size was too big to do primary closure, we performed rotation flap. For wide multiple lesions, a split thickness skin graft was performed. Results: Among the 21 patients, 12 patients were male and 9 patients were female, and their mean age was 42 years (SD=17.38, range: 11~75 years). The lesion site was the foot in 10 patients, the hand in 8 patients, the face in 2 patients, and the scalp in 1 patient. The mean treatment duration was 13.5 days (SD=4.36, range: 6~15 days) for the primary closure or rotation flap, and 18.5 days (SD=2.12, range: 17~20 days) for the skin graft. 20 patients were cured without recurrence. No recurrence was observed in the patients who underwent primary closure or rotation flap. One of the two patients who underwent a skin graft of their wart that had covered their entire palm had local recurrence in part of her finger tips. Conclusion: We performed surgical procedure on recalcitrant wart. As a results, we can treat it with short treatment duration, low recurrence rate and less scarring and get high patient satisfaction.