• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.418-428
• /
• 2007

In the calculation of wave propagation by Boussinesq equation model, it is very common to experience numerical noises generated from nonlinear interaction and breaking wave occurrence, and the numerical solution is rapidly diverged unless the noises are properly controlled. A comparative study was here undertaken for the characteristics of three different lowpass filters (FFT filter, Gaussian filter and Shapiro filter) which are all designed to be applied to the interim results of numerical calculation. The numerical results obtained with application of respective filter techniques were compared with the results of an existing hydraulic experiment for the aspects of noise suppression, conservation of main signal and altering time. The results show that the Shapiro filter can be best applied with optimal choices of its element number, pass number and filtering tune interval. The combination of the number of filter element off, pass number of 50 or less, and application interval of 100 to 200 time steps generally showed good performance in both accuracy and efficiency of the numerical calculation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.4
• /
• pp.274-280
• /
• 2009

In order to estimate the accurate location of a user, Global Positioning system (GPS) requires at least four satellites. Since a conventional despreader operate for an GPS signal of interest, we need multiple despreaders for detecting multiple GPS signals. In this paper, we introduce the extension of the recently proposed system consisting of a null despreader, a conventional despreader, multi-stage CM (constant modulus) array, for the multiple GPS signals, and present the mathematical expression of the signal-to-interference-and-noise ratio (SINR). The extended system does not require the exact information of the direction of arrival (DOA) to suppress the directional interferences. We present the computer simulation to demonstrate the interference suppression performance of the proposed system for multiple GPS signals.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.41-46
• /
• 2014

In this paper, we propose a novel voice activity detection (VAD) algorithm using feature vectors based on TE (teager energy). Specifically, power spectral deviation (PSD), which is used as the feature for the VAD in the IS-127 noise suppression algorithm, is obtained after the input signal is transfomed by Teager energy operator. In addition, the TE-based likelihhod ratio are derived in each frame to modifiy the PSD for further VAD. The performance of our proposed VAD algorithm are evaluated by objective testing (total error rate, receiver operating characteristics, perceptual evaluation of speech quality) under various environments, and it is found that the proposed method yields better results than conventional VAD algorithms in the non-stationary noise environments under 5 dB SNR (total error rate = 2.6% decrease, PESQ score = 0.053 improvement).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.786-795
• /
• 2010

In this paper, we propose a new EBG structure that the two unit cells are connected by the bridge line in signal transmission plane. The SSN of the power plane is reduced effectively by via holes and bridge lines connecting the unit cells. The superior signal transfer characteristic is shown between the signal lines in the signal transmission plane. The proposed EBG structure contains 1.2 GHz cut-off frequency and less than －30 dB suppression in the 8.3 GHz broad bandwidth. In addition, To improve the SI(Signal Integrity) in signal transmission plane keeping the same bandstop frequency range, the optimized location of the reference plane is proposed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.388-396
• /
• 2019

This paper describes the RF(Radio Frequency) interference on the GNSS receiver due to the S-band signals transmitted from the transmitters in the Test Launch Vehicle, and analyzes the cause of the RF interference. Due to the S-band signals that have relatively high power levels compared with GNSS signals, an LNA(Low Noise Amplifier) in the active GNSS antenna was saturated, and the intermodulation signal within GNSS in-bands was produced in the LNA whenever two S-band signals were received from the GNSS antenna. For these reasons, the C/N0 of the satellite signals in the GNSS receiver was attenuated severely. The design of the LNA was changed in order to protect the RF interference due to the S-band signals and the suppression capability of the RF interference was confirmed in the new LNA through the comparison of the old LNA.

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.847-853
• /
• 2006

In this paper, we designed VCO(voltage controlled oscillator} that is composed of a dielectric resonator and a varactor diode, and the PLDRO(phase locked dielectric resonator oscillator) that is combined with the sampling phase detector and loop filter. The results at 12.05 GHz show the output power is 13.54 dBm frequency tuning range approximately +/- 7.5 MHz, and power variation over the tuning range less than 0.2 dB, respectively. The phase noise which effects on bits error rate in digital communication is obtained with -114.5 dBc/Hz at 100 kHz offset from carrier, and The second harmonic suppression is less than -41.49 dBc. These measured results are found to be more improved than those of VCO without adopting PLL, and the phase noise and power variation performance characteristics show the better performances than those of conventional PLL.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.906-911
• /
• 2004

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator) applied to FMCW(Frequency Modulated Continuous Wave)Radar as stable source is implemented and constructed with a MESFET(Metal-semiconductor Field-Effect Transistor) for low noise, a dielectric resonate. of high frequency selectivity, and high Q varator diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated thrash harmonic balance simulation technique to provide the optimum performance. The measured result of a fabricated VCDRO shows that output is 2.22㏈m at 12.05GHz, harmonic suppression -30㏈c, phase noise -130㏈c at 100KHz offset, and sweep range of varator diode $\pm$18.7MHz, respectively. This oscillator will be available to FMCW Radar.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2380-2386
• /
• 2013

A PLL with an unipolar charge pump and a loop filter consisting of sample-hold capacitor and 2nd-order RC filter has been proposed. The goal of the proposed PLL is the suppression of reference spur which is caused by charge pump mismatch. It also improves phase noise characteristic. It has been designed with a 1.8V $0.18{\mu}m$ CMOS process and proved by HSPICE simulation.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.358-367
• /
• 2017

This paper presents a novel filtering method for speed measurements to improve the low-speed performance of the direct-drive permanent magnet traction machines for elevators. Based on the theory of nonlinear tracking differentiator (NTD), this method, which can act as a high performance filter of a raw speed signal, obtains a more accurate speed feedback signal when applying a low-resolution encoder. In addition, it can relieve the interference caused by the position derivative for speed sampling. By analyzing the frequency response of the NTD, the influence of its parameters on the performance of the speed filtering is investigated. Compared with different types of low-pass filters, the proposed method shows a shorter time delay and a stronger ability in terms of noise suppression when the parameters are selected carefully. In addition, when using the measured speed signal through a nonlinear tracking differentiator as the feedback of the system, the motor runs more steadily at low speeds. As a result, the riding comfort of a direct-drive elevator can be improved. The feasibility of the proposed strategy was verified on an 11.7kW elevator traction machine using a commercial inverter.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2002

Using Mach-Zehnder type intensity modulator, we stabilized a 10 GHz harmonically mode-locked dispersion-compensated fiber ring laser using a feedback controlling system, and we measured its stability. The laser was stabilized for more than 16 hours by controlling the cavity length to suppress the relaxation oscillation frequency component which had caused the laser output instability. The ms timing jitter and ms amplitude noise were measured to be 260-524 fsec and 4~11.5%, respectively, and BER test measurement showed a value of 10$^{-13}$ .