• 한국재료학회지
• /
• 제21권12호
• /
• pp.639-643
• /
• 2011

Zinc oxide as an optoelectronic device material was studied to utilize its wide band gap of 3.37 eV and high exciton biding energy of 60 meV. Using anti-site nitrogen to generate p-type zinc oxide has shown a deep acceptor level and low solubility. To increase the nitrogen solubility in zinc oxide, group 13 elements (aluminum, gallium, and indium) was co-added to nitrogen. The effect of aluminum on nitrogen solubility in a $3{\times}3{\times}2$ zinc oxide super cell containing 72 atoms was investigated using density functional theory with hybrid functionals of Heyd, Scuseria, and Ernzerhof (HSE). Aluminum and nitrogen were substituted for zinc and oxygen sites in the super cell, respectively. The band gap of the undoped super cell was calculated to be 3.36 eV from the density of states, and was in good agreement with the experimentally obtained value. Formation energies of a nitrogen molecule and nitric oxide in the zinc oxide super cell in zinc-rich conditions were lower than those in oxygen-rich conditions. When the number of nitrogen molecules near the aluminum increased from one to four in the super cell, their formation energies decreased to approach the valence band maximum to some degree. However, the acceptor level of nitrogen in zinc oxide with the co-incorporation of aluminum was still deep.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1029-1038
• /
• 2008

전이금속 산화물의 전구체가 들어있는 합성모액을 수열 반응시켜 전이금속 산화물이 고정된 하이드로탈사이트를 제조하여 이들에 대한 이산화질소의 흡착 성질을 조사하였다. 전이금속 산화물의 분산도, 이산화질소의 흡착량 및 흡착상태를 XRD, SEM, XPS, 질소 흡착등온선, 중량식 흡착법, FT-IR, 승온탈착법으로 조사하였다. 전이금속 산화물은 주로 하이드로탈사이트의 표면에 분산 담지되었으며, 철과 니켈 산화물이 고정된 하이드로탈사이트에 이산화질소가 많이 흡장되었다. 철 산화물이 표면에 분산되어 담지되면 이산화질소의 흡장량이 많지만, 철 산화물이 지나치게 많이 담지되면 덩어리져서 표면의 염기점을 차폐하므로 이산화질소의 흡장량이 오히려 줄어들었다. 철 산화물의 고정량이 적절하면 하이드로탈사이트에서 이산화질소의 흡장세기는 약해지지만, 흡장량은 많아지고 수열 안정성이 증진되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.792-798
• /
• 2013

In this study, we have carried out measurement for exhaust emissions such as particulate matter (PM), nitrogen oxide and carbon oxide from main engines installed on the training ships, HANBADA and HANNARA, of Korea Maritime University. In particular, we considered the two conditions; at arrivals/departures and at constant speed of about 160 rpm. The result showed that the concentration of PM at the ship arrival was 2.41mg/m3. On the other hand, when the ship is on the navigation condition, the concentration of PM was 1.34 mg/m3. The concentrations of nitrogen oxide and carbon oxide were measured in the range of 1,120~1,600 ppm and 320~1,450 ppm at the arrival and departure at the port. Under constant speed condition, the concentrations of nitrogen oxide and carbon oxide were 913~1,470 ppm and 73~460 ppm, respectively. Generally, the concentrations of exhaust emissions under the arrivals and departures were higher than that of constant speed condition. These results imply that the ship operation skill to prevent a sudden load change of main engine is needed during the arrival or departure. In addition, it means that the difference of exhaust emissions according to navigation conditions has to be considered when the reduction technologies of air pollutants from ships are developed.

• 한국환경농학회지
• /
• 제42권4호
• /
• pp.418-426
• /
• 2023

This study focused on nitrous oxide, a major greenhouse gas produced in agricultural settings through bacterial nitrogen oxidation in aerobic soil. Nitrogen fertilizer in farmland is identified as a primary source of nitrous oxide. The importance of reducing excess nitrogen in soil to mitigate nitrous oxide production is well-known. The study investigated the use of liquefied pig manure as an alternative to urea fertilizer in conventional agriculture. Results showed a more than two-fold reduction in nitrous oxide emissions in pepper cultivation areas with liquefied pig manure compared to that with urea fertilizer. The population of Nitrosospira, a nitrous oxide-producing bacterium, decreased by over 10% with liquefied pig manure. Additionally, nirK and nosZ, which are related to the denitrification process, significantly increased in the urea fertilizer group, whereas levels in the liquefied pig manure group resembled those with no nitrogen treatment. In conclusion, the experiment confirmed that liquefied pig manure can serve as an eco-friendly nitrogen fertilizer, significantly reducing nitrous oxide production, a major contributor to the atmospheric greenhouse effect.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.20-28
• /
• 2010

According to the bipolar model, ion selectivity of some species in the passive film is important factor to control the passivation. An increase of cation selectivity of outer layer of the passive film can stabilize the film and improves the corrosion resistance. Therefore, the formation and roles of ionic species in the passive film should be elucidated. In this work, two types of solution (hydrochloric or sulfuric acid) were used to test high N and Mo-bearing stainless steels. The objective of this work was to investigate the formation of oxyanions in the passive film and the roles of oxyanions in passivation of stainless steel. Nitrogen exists as atomic nitrogen, nitric oxide, nitro-oxyanions (${NO_x}^-$), and N-H species, not nitride in the passive film. Because of its high mobility, the enriched atomic nitrogen can act as a reservoir. The formation of N-H species buffers the film pH and facilitates the formation of oxyanions in the film. ${NO_x}^-$ species improve the cation selectivity of the film, increasing the oxide content and film density. ${NO_x}^-$ acts similar to a strong inhibitor both in the passive film and at active sites. This facilitates the formation of chromium oxide. Also, ${NO_x}^-$ can make more molybdate and nitric oxide by reacting with Mo. The role of Mo addition on the passivation characteristics of stainless steel may differ with the test environment. Mo exists as metallic molybdenum, molybdenum oxide, and molybdate and the latter facilitates the oxide formation. When nitrogen and molybdenum coexist in stainless steel, corrosion resistance in chloride solutions is drastically increased. This synergistic effect of N and Mo in a chloride solution is mainly due to the formation of nitro-oxyanions and molybdate ion. Oxyanions can be formed by a 'solid state reaction' in the passive film, resulting in the formation of more molybdate and nitric oxide. These oxyanions improve the cation selectivity of the outer layer and form more oxide and increase the amount of chromium oxide and the ratio of $Cr_2O_3/Cr(OH)_3$ and make the film stable and dense.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.677-683
• /
• 2019

In this paper, nitrogen-doped reduced graphene oxide(rGO) is obtained by thermal annealing of nitrogen-containing compounds and graphene oxide (GO) manufactured by modified Hummers' method. We use melamine as a nitrogen-containing compound and treat GO thermally with melamine at over $800{\sim}1,000^{\circ}C$ and 1 ~ 3 hr under Ar atmosphere. The electrical conductivity of doped rGO is measured by 4-point probe method. As a result, nitrogen contents on rGO are found to be in the range of 2.5 to 12.5 at% depending on the doping conditions after thermal annealing. The main doping site on graphene oxide is changed from pyridinic-N and pyrrolinic N to the graphitic site as the heat treatment temperature increases. The electrical conductivity of doped rGO increases as the N doping content increases. As the thermal treatment time increases, the change of both total doping contents and doping sites is slight and the surface resistance is remarkably reduced, which is caused by healing effects of doped graphene oxide at high temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.41-41
• /
• 2011

Flash memory에서 tunnel oxide film은 electron tunnelling 현상을 이용하여 gate에 전하를 전달하는 통로로 사용되고 있다. 특히, tunnel oxide film 내부의 charge trap 현상과 불순물이 소자 특성에 직접적인 영향을 주고 있어, 후속 N2O/NO 열처리 공정에서 SiO2/Si 계면에 nitrogen을 주입하여 tunnel oxide film 특성을 개선하고 있다. 따라서 N2O/NO 열처리 공정 최적화를 위해서는 tunnel oxide film 내 N 농도와 분포에 대한 정확한 평가가 필수적이다[1]. 본 실험에서는 low energy magnetic SIMS를 이용하여 N2O로 열처리된 tunnel oxide film 내의 N농도를 보다 정확하게 평가하고자 하였다. 사용된 시료는 Si substrate에 oxidation 이후 N2O 열처리를 진행하여 tunnel oxide를 형성시켰으며, 분석 impact energy는 surface effect최소화와 최상의 depth resolution 확보를 위해 250eV를 사용하였으며, matrix effect와 mass interference를 방지하기 위해 MCs+ cluster mode[2]로 CsN signal를 검출하였다. 실험 결과, 특정 primary beam 입사각도에서 nitrogen depth resolution 저하 현상이 발생하였고, SIMS crater 표면이 매우 거칠게 나타났다. 이에, Depth resolution 저하 현상을 개선하기 위해 극한의 glancing 입사각 조건으로 secondary extraction voltage 변화를 통해 depth resolution이 개선되는 최적의 impact energy와 primary beam 입사각 조건을 확보하였다. 그 결과 nitrogen의 depth resolution은 1.6nm의 depth resolution을 확보하였으며, 보다 정확한 N 농도와 분포를 평가할 수 있게 되었다.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.493-500
• /
• 2023

본 연구에서는 전도성 재료를 혼입한 광촉매 보도블록을 제조하여 질소산화물 제거율에 미치는 영향을 살펴보고 내구성이 향상된 블록을 제조하고자 하였다. 광촉매와 전도성 재료인 활성탄소를 혼입시 광촉매 효율이 향상되었으며 전도성 광촉매 콘크리트 블록의 경우 광촉매 콘크리트 블록보다 질소산화물 제거율이 2.5배 정도 향상되었다. 전도성 광촉매 시험편의 질소산화물 제거율이 높게 나타난 것은 전도성 재료인 활성탄소의 영향으로 TiO₂ 광분해로 인한 광전류가 많이 발생한 영향으로 볼 수 있으며 광촉매 시험편과 전도성 광촉매 시험편의 질소산화물 제거율 실험결과와 광전류 시험결과를 비교 분석하였다.

• 동력기계공학회지
• /
• 제11권4호
• /
• pp.26-31
• /
• 2007

Recently, study on the improvement of combustion performance for the diesel engine by using the impinging spray in the combustion chamber has been actively studied. The purpose of this study is to examine the variation of exhaust emission between the trial engine with impinging plate and the prototype engine in accordance with change of fuel injection timing and fuel injection pressure. The concentration of nitrogen oxide of trial engine decreased more than 50% compared to prototype engine. However, smoke of trial engine indicated very high concentration compared to prototype engine. The effect of fuel injection timing on the nitrogen oxide and smoke indicated different results, that is, the concentration of nitrogen oxide decreased as the degree of fuel injection start become slower, whereas the concentration of smoke decreased as the degree of fuel injection start become faster.

• 한국진공학회지
• /
• 제10권3호
• /
• pp.328-334
• /
• 2001

초박막 게이트 유전막 및 비휘발성 기억소자의 게이트 유전막으로 연구되고 있는 NO/$N_2$O 질화산화막 및 재산화질화산화막의 특성을 D-SIMS(dynamic secondary ion mass spectrometry), ToF-SIMS(time-of-flight secondary ion mass spectrometry), XPS(x-ray Photoelectron spectroscopy)으로 조사하였다. 시료는 초기산화막 공정후에 NO 및 $N_2$O 열처리를 수행하였으며, 다시 재산화공정을 통하여 질화산화막내 질소의 재분포를 형성토록 하였다. D-SIMS 분석결과 질소의 중심은 초기산화막 계면에 존재하며 열처리 공정에서 NO에 비해서 $N_2$O의 경우 질소의 분포는 넓게 나타났다. 질화산화막내 존재하는 질소의 상태를 조사하기 위하여 ToF-SIMS 및 XPS 분석을 수행한 결과 SiON, $Si_2$NO의 결합이 주도적이며 D-SIMS에서 조사된 질소의 중심은 SiON 결합에 기인한 것으로 예상된다. 재산화막/실리콘 계면근처에 존재하는 질소는 $Si_2$NO 결합형태로 나타나며 이는 ToF-SIMS로 얻은 SiN 및 $Si_2$NO 결합종의 분포와 일치하였다.