• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.315-320
• /
• 1989

A method was presented for the analysis of trace metals in iron oxide ore. The method utilized ammonium pyrrolidinedithiocarbamate (APDC)-methyl isobutyl ketone (MIBK) extraction procedure and analysis by atomic absorption spectroscopy (AA). Citrate at pH $8{\sim}10$ for the determination of Co, Ni and Cu or tiron at pH $6{\sim}7$for the determination of Mn and Cu was added as a masking agent to prevent extraction of Fe(III) into the organic phase. Reduction of solubility of MIBK in water was achieved by addition of NaCl as a salting-out agent. Back extraction of the MIBK extracts with aqueous $HNO_3$ was also studied to increase the stability of metal extracts.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.364-370
• /
• 2019

Fe-Mn-Si-Ni-Cr-TiC alloys have a shape memory property, recovering initial shape by heating. With an aim to improve a durability and stability of building and infrastructure, this Fe-based shape memory alloy (FSMA) can be employed to reinforce concrete structure with creation of compressive residual stress. In this work, corrosion resistance of FSMA was compared with general rebar and S400 carbon steel to evaluate the stability in concrete environment. Potentiodynamic polarization test in de-ionized water, tap-water and 3.5 wt.% NaCl solution with variations of pH was used to compare the corrosion resistance. FSMA shows better corrosion resistance than rebar and S400 in tested solutions. However, Cl-containing solution is critical to significantly reduce the corrosion resistance of FSMA. Therefore, though FSMA can be a promising candidate to replace the rebar and S400 for the reinforcement of concrete structure, serious cautions are required in marine environments.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1410-1414
• /
• 2005

Neopentyl arenesulfonates reacted with primary alkylmagnesium halides in the presence of $(PPh_3)_2NiCl_2$ to produce the corresponding alkylarenes. The efficiency of this coupling reaction considerably depends on the nature of catalyst and solvent. Highest yield was obtained by using three equivalents of Grignard reagent to a mixture of $(PPh_3)_2NiCl_2$ and arenesulfonate in refluxing $Et_2O$. This reaction represents a novel method allowing the efficient and creative substitution of sulfur-containing groups in aromatic compounds. It also shows that the alkyloxysulfonyl group might be a suitable alternative to halides and triflate in some circumstances.

• Korean Journal of Crystallography
• /
• v.12 no.2
• /
• pp.88-91
• /
• 2001

The complex [NiL₃]Cl₂·3H₂O (1) (L=trans-1,2-diaminocyclohexane) has been synthesized and characterized by X-ray crystallography. The compound 1 crystallizes in the cubic space group P2₁3, with a=13.830(1) Å, V=2645.9(2) ų, Z=4, R₁(wR₂) for 1500 observed reflections of [I> 2σ(I)] was 0.0766 (0.2068).

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.281-284
• /
• 2007

Neopentyl arenesulfonates react with secondary alkylmagnesium chlorides in the presence of dppfNiCl2 to produce the corresponding arenes via the reductive cleavage of carbon-sulfur bond. Highest yield is obtained by using three equivalents of Grignard reagent to a mixture of arenesulfonate and dppfNiCl2 in Et2O at room temperature. This reaction represents a novel method allowing the efficient hydrogenolysis of sulfur-containing groups in aromatic compounds.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.217-221
• /
• 1995

Axial coordination of anions or water to the square-planar nickel(Ⅱ) complexes of the hexaaza macrocyclic ligands 1, 2, and 3, which contain two extra uncoordinated tertiary nitrogens, have been investigated in aqueous solutions containing HX (X=Cl-, Br-, NO3-, or ClO4-) and/or NaX. The nickel(Ⅱ) complexes exist in the acidic solutions as equilibrium mixtures of the square-planar [Ni(L)]2+ (L=1, 2, and 3) and octahedral species [Ni(H2L)X2]2+ (H2L=diprotonated form of L). Some octahedral complexes have been isolated and characterized. The solution behaviors of the complexes indicate that the formation of the octahedral complexes are significantly promoted by the protonation of the uncoordinated tertiary amines. The proportion of the octahedral complexes depends on the type of acid, and increases in the order of HBr < HNO3 < HCl.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.487-495
• /
• 2010

A microorganism hydrolyzing carboxymethylcellulose (CMC) was isolated from seawater, identified as Psychrobacter aquimaris by analysis of 16S rDNA sequences, and named P. aquimari LBH-10. This strain produced an acidic carboxymethylcellulase (CMCase), which hydrolyzed carboxymethylcellulose (CMC), cellobiose, curdlan, filter paper, p-nitrophenyl-$\beta$-D-glucopyranoside (pNPG), pullulan, and xylan, but there was no detectable activity on avicel and cellulose. The optimal temperature for CMCase produced by P. aquimari LBH-10 was $50^{\circ}C$ and more than 90% of its original activity was maintained at broad temperatures ranging from 20 to $50^{\circ}C$ after 24 hr. The optimal pH of the CMCase was 3.5, and more than 70% of its original activity was maintained under acidic conditions between pH 2.5 and 7.0 at $50^{\circ}C$ after 24 hr. The optimal pH of CMCase produced by P. aquimaris LBH-10 seems to be lower than those produced by any other bacterial and fungal strain. $CoCl_2$, EDTA, and $PbCl_2$ at a concentration of 0.1 M enhanced CMCase-produced P. aquimaris LBH-10, whereas $HgCl_2$, KCl, $MnCl_2$, $NiCl_2$, and $SrCl_2$ inhibited it.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2597-2603
• /
• 2013

The reactions of hydrated $CdCl_2$, $MnCl_2$, and $NiCl_2$ with 2,2'-bipyidine-3,3',6,6'-tetracarboxylic acid ($H_4bptc$) afforded the mononuclear [$Cd^{II}(H_2bptc)(H_2O)_3]{\cdot}H_2O$ (1), linear $\{[Cd(H_2bptc)(H_2O)]{\cdot}3H_2O\}_n$ (2), 3-D heterobimetallic $[NaCd(Hbptc)(H_2O)]$ (3), layer $[Mn(H_2bptc)(H_2O)]_n$ (4) and a dinuclear compound $[Ni_2(H_2bptc)-(H_2O)_2]{\cdot}6H_2O$ (5). These compounds have been characterized by elemental analysis, IR, and their structures have been determined by X-ray crystallography. The thermal stabilities of 1-3 were measured by thermogravimetric analysis (TGA) and their solid state luminescence properties together with the free ligand $H_4bptc$ were investigated at room temperature.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.183-190
• /
• 2012

Hydrogen was generated by the reaction of metal hydride with water. The variation of hydrogen generation with the kind of powders (milled $MgH_2$, and $MgH_2$ milled with various contents of MgO, $MgCl_2$ or $Ni+Nb_2O_5$) was investigated. $MgH_2$ powder with a hydrogen content of 6.05 wt% from Aldrich Company was used. Hydrogen is generated by the reaction of Mg as well as $MgH_2$ with water, resulting in the formation of byproduct $Mg(OH)_2$. For about 5 min of reaction time, milled $95%MgH_2+5%MgO$ has the highest hydrogen generation rate among milled $MgH_2+x%MgO$ (x=0, 5, 10, 15 and 20) samples. Milled $90%MgH_2+10%MgCl_2$ has the highest hydrogen generation rate among all the samples.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1884-1890
• /
• 2011

A series of Ni(II) and Pd(II) complexes bearing N4-type tetradentate ligands, [Ni($X^1X^2$-6-$Me_2bpb$) 1] and [Pd($X^1X^2$-6-$Me_2bpb$) 2]; 6-$Me_2bpb$ = N,N'-(o-phenylene)bis(6-methylpyridine-2-carboxamidate), $X^1$ = Cl, H, or $CH_3$, $X^2$ = $NO_2$, Cl, F, H, $CH_3$, or $OCH_3$) were designed, synthesized, and characterized to investigate electronic and steric effects of ligand on the norbornene polymerization catalysts. Using modified methylaluminoxanes as an activator, the complexes exhibited high catalytic activities for the polymerization of norbornene and the nickel complexes exhibited better catalytic activity the palladium complexes. Ni complex 1a with $NO_2$ group on the benzene ring showed the highest catalytic activity of $4.9{\times}10^6$ g of PNBEs/$mol_{Ni}{\cdot}h$ and molecular weight of $15.28{\times}10^5$ g/mol with PDI < 2.30. Complexes with electron-withdrawing groups are more thermally stable (> 100 $^{\circ}C$), and tend to afford higher polymerization productivities than the ones having electron-donating groups. Amorphous polynorbornenes were obtained with good solubility in halogenated aromatic solvents. A vinyl addition mechanism has been proposed for the catalytic polymerization.