• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1902-1910
• /
• 2009

This paper presents a graphical windows-based program for the education and training for novel network reduction. The object of developed simulator is to provide users with a simple and useable tool for gaining an intuitive feel for power system analysis. The developed simulator consists of the main module (MMI,GUI), the location marginal price module (LMP), the clustering module and network reduction module. Each module has a separate graphical and interactive interfacing window. The developed simulator needs with the PSS/E input data format, generator cost function, location information. Line admittances of reduced network was determined by using the power flow method(Newton-Raphson). So line flow of reduced network is almost same to original power system. Results of reduced network are compared on the window in the tabular format. Therefore, the developed simulator can be utilized as a useful tool for effective education and training for power system analysis.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.151-153
• /
• 2006

we present a method of sequential speech enhancement, where we infer clean speech signal using a Rao-Blackwellized particle filter (RBPF), given a noise-contaminated observed signal. In contrast to Kalman filtering-based methods, we consider a non-Gaussian speech generative model that is based on the generalized auto-regressive (GAR) model. Model parameters are learned by a sequential Newton-Raphson expectation maximization (SNEM), incorporating the RBPF. Empirical comparison to Kalman filter, confirms the high performance of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.917-923
• /
• 1999

This paper proposes an efficient method of hydro-thermal scheduling in coordination with head variation and hydraulically coupled plants using Evolutionary Programing(EP). Based on the EP technique, the proposed algorithm is capable of determining the global optimal solutions. The constraints such a power balance condition, water available condition and transmission losses are embedded and satisfied throughout the proposed EP approach. The effectiveness of the proposed approach is demonstrated on the test systems and compared to those of other method. The results show that the new approach obtains a more highly optimal solutions than the conventional other methods such as newton-raphson method, Dynamic Programming(DP), LU factorization.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.753-760
• /
• 1994

This paper proposes a new method to compute the static thrust of a hybrid-type LPM by the coenergy method, which can be applied to a nonlinear programming of the optimization techniques for the optimal design. In the process of the computation, the magnetic nonlinearities of the permanent magnet, the primary and the secondary core are interpolated by the cubic spline method. And then, the equivalent magnetic circuit including the airgap reluctance which is a function of the displacement is modelled by the permeance method. The static thrust which is a derivative of the coenergy is computed by the Newton Raphson method at each displacement. To verify this proposed method, the results of the compjutation are compaction with those of the experiment obtained from the DLPM with 2 phase and 4 poles.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.130-132
• /
• 1996

The power flow calculations(PFc) are the most important and powerful tools in power systems engineering. The conventional power now problem is solved generally with numerical methods such as Newton-Raphson. The conventional numerical method generally have some convergency problem, which is sensitive to initial value, and numerical stability problem concerned with matrix inversion. This paper presents a new power flow calculation algorithm based on the genetic algorithm(GA) which can overcome the disadvantages mentioned above. Some case studies with IEEE 6 bus system also presented to show the performance of proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.134-136
• /
• 1993

This paper presents a novel and efficient method to calculate the critical point of voltage collapse. Conjugate gradient and modified Newton-Raphson methods are employed to calculate two pairs of multiple load flow solutions for two operating conditions, i.e., both +mode and -mode voltages for two loading conditions respectively. Then these four voltage magnitude-load data sets of the bus which is most susceptible to voltage collapse, are fitted to third order polynomial using Lagrangian interpolation in order to represent approximate nose curve (P-V curve). This nose curve locates first estimate of the critical point of voltage collapse. The procedure described above is repeated near the critical point and the new estimate will be very close to the critical point. The proposed method is tested for the eleven bus Klos-Kerner system, with good accuracy and fast computation time.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.324-326
• /
• 2000

A 3D magnetostatic field is analyzed considering the non-linear characteristics of the material using finite element method. In the finite element formulation, the edge element is adopted since it reduces the required computer memory and the computing time. The modified Newton-Raphson method is also used for non-linear analysis. A numerical example with the TEAM workshop problem 13 is analyzed, and the results are proved to concide well with measured ones.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.31-33
• /
• 2001

잠열축열 그린하우스 난방 시스템의 난방특성을 분석하기 위하여 이에 대한 열평형 이론을 정립하고 수치해석에 의하여 컴퓨터 시뮬레이션 모델을 개발하고자 잠열축열 그린하우스 난방 시스템의 열저항 회로망을 구성하였다. 그리고 그린하우스의 피복재, 내부 공기, 토양표면, 잠열 축열재와의 열평형 방정식을 구성하였으며, Newton-Raphson반복법을 이용하여 수치해석을 하였고, 실험 분석을 통하여 수치해의 타당성을 검증하였다. 시뮬레이션 모델을 위하여 C언어를 사용하였으며, 겨울철 (11월-2월)의 기후 조건이 유사한 여러 날을 선정하여 온도, 태양강도, 상대습도, 토양 수분함량 등을 자료로 하여 모델링을 하였다. 여기에 사용된 토양 조건은 사양토로 건조한 상태를 유지하였다. 이상과 같은 분석에 의하여 그린하우스내 경시적 공기온도 변화와 열전달 현상의 실험치와 이론분석 결과가 잘 일치하고 있음을 알 수 있었다.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.964-973
• /
• 2015

This paper presents a simple approach for the selective harmonic elimination (SHE) of multilevel inverter based on the transistor-clamped H-bridge (TCHB) family. The SHE modulation is derived from the sinusoidal voltage-angle equal criteria corresponding to the optimized switching angles. The switching angles are computed offline by solving transcendental non-linear equations characterizing the harmonic contents using the Newton-Raphson method to produce an optimum stepped output. Simulation and experimental tests are conducted for verification of the analytical solutions. An Altera DE2 field-programmable gate array (FPGA) board is used as the digital controller device in order to verify the proposed SHE modulation in real-time applications. An analysis of the voltage total harmonic distortion (THD) has been obtained for multiple output voltage cases. In terms of the THD, the results showed that the higher the number of output levels, the lower the THD due to an increase number of harmonic orders being eliminated.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.993-996
• /
• 1993

This paper presents the static thrust of a hybid-type LPM by coenergy method. First, the nonlinealities of the permanent magnet, the primary core and the secondary are interpolated by the cubic spline method. Then the equivalent magnetic circuit including airgap reluctance, which is a function of displacement, modelled by the permeance method is obtained. From the derivative of coenergy with displacement computed by Newton Raphson method, the static thrust is calculated at each displacement with certain exciting current.