• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.481-505
• /
• 2013

This paper focuses on thermal post-buckling analysis of functionally graded beams with temperature dependent physical properties by using the total Lagrangian Timoshenko beam element approximation. Material properties of the beam change in the thickness direction according to a power-law function. The beam is clamped at both ends. In the case of beams with immovable ends, temperature rise causes compressible forces and therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. Also, the material properties (Young's modulus, coefficient of thermal expansion, yield stress) are temperature dependent: That is the coefficients of the governing equations are not constant in this study. This situation suggests the physical nonlinearity of the problem. Hence, the considered problem is both geometrically and physically nonlinear. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. In this study, the differences between temperature dependent and independent physical properties are investigated for functionally graded beams in detail in post-buckling case. With the effects of material gradient property and thermal load, the relationships between deflections, critical buckling temperature and maximum stresses of the beams are illustrated in detail in post-buckling case.

• 소성∙가공
• /
• 제12권8호
• /
• pp.710-717
• /
• 2003

The implicit, finite element analysis program for analyzing the springback in the warm forming process of aluminum alloy sheets was developed. For the description of planar anisotropy in warm forming temperatures, Barlat's yield function is employed, and the power law type constitutive equation is used in terms of working temperatures for the depiction of work hardening in high temperatures. Also, Jetture's 4-node shell elements are introduced for reflecting the mechanical behavior of aluminum alloy sheet and the non-steady heat balance equations are solved for considering heat gain and loss during the forming process. For the springback evaluation, Newton-Raphson iteration method is introduced for overcoming the geometric nonlinearlity problem. In order to verify the validity of the FEM program developed, the stretching bending and springback processes are simulated. Though springback analysis results are slightly bigger than experimental ones, they have the same trend of the decreasing springback as the forming temperature increases.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 제4회 박판성형 심포지엄
• /
• pp.13-20
• /
• 2003

The implicit, finite element analysis program for analyzing the springback in the warm forming process of aluminum alloy sheets was developed. For the description of planar anisotropy in warm forming temperatures, Barlat's yield function is employed, and the power law type constitutive equation is used in terms of working temperatures fur the depiction of work hardening in high temperatures. Also, Jetture's 4-node shell elements are introduced for reflecting the mechanical behavior of aluminum alloy sheet and the non-steady heat balance equations are solved for considering heat gain and loss during the forming process. For the springback evaluation, Newton-Raphson iteration method is introduced for overcoming the geometric nonlinearlity problem. In order to verify the validity of the FEM program developed, the stretching bending and springback processes are simulated. Though springback analysis results are slightly bigger than experimental ones, they have the same trend of the decreasing springback as the forming temperature increases.

• 한국유체기계학회 논문집
• /
• 제7권5호
• /
• pp.20-28
• /
• 2004

Static and dynamic structural analyses of a turbine bladed-disk for a liquid rocket turbopump are performed to investigate the safety level of strength and vibration at design point. During operation, turbopump is exposed to various external loads. Therefore, the effects of them should be carefully considered and properly modeled. First, due to the high rotational speed of the turbopump, effects of centrifugal forces are considered in the structural analysis. Thermal load caused by severe temperature differences is also considered. A three dimensional finite element method (FEM) is used for linear and nonlinear structural analyses with modified Newton-Raphson iteration method. After the nonlinear solution is obtained from the structural analysis, dynamic characteristics are obtained as a function of rotational speed from the linearized eigenvalue analysis at an equilibrium position. From the analysis results, characteristics of stress distribution and vibration were thoroughly examined and investigated.

• Advances in nano research
• /
• 제12권5호
• /
• pp.441-455
• /
• 2022

This study explores the linear and nonlinear solutions of sigmoid functionally graded material (S-FGM) nanoplate with porous effects. A size-dependent numerical solution is established using the strain gradient theory and isogeometric finite element formulation. The nonlinear nonlocal strain gradient is developed based on the Reissner-Mindlin plate theory and the Von-Karman strain assumption. The sigmoid function is utilized to modify the classical functionally graded material to ensure the constituent volume distribution. Two different patterns of porosity distribution are investigated, viz. pattern A and pattern B, in which the porosities are symmetric and asymmetric varied across the plate's thickness, respectively. The nonlinear finite element governing equations are established for bending analysis of S-FGM nanoplates, and the Newton-Raphson iteration technique is derived from the nonlinear responses. The isogeometric finite element method is the most suitable numerical method because it can satisfy a higher-order derivative requirement of the nonlocal strain gradient theory. Several numerical results are presented to investigate the influences of porosity distributions, power indexes, aspect ratios, nonlocal and strain gradient parameters on the porous S-FGM nanoplate's linear and nonlinear bending responses.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.329-337
• /
• 2000

An investigation has been performed to develop an analysis tool based on a nonlinear beam theory, which can be used to predict the long-term behavior of an artificial hip joint. The nonlinear behav ior of the femur arise from the coupled dependence of the bone density and the mechanical properties on each other. The beam theory together with its numerical algorithm is developed to take into account the nonlinear bone remodeling process of the femur that is long enough to be assumed as a beam. A piecewise linear curve for the bone remodeling rate is used in the bone remodeling theory and the surface area density of bone is modeled as the third order polynomial function of bone density. At each section of the beam, a constant curvature is assumed and the longitudinal strains are also assumed to vary linearly across the section. The Newton-Rhapson iteration method is used to solve the nonlinear equations for each cross section of the bone and a backward method is used to march along the time. The density and the remodeling signal ar, calculated along with time for the various time steps, and the developed beam theory has been verified by comparing with the results of finite element analysis of a remodeling bone with an artificial hip joint of titanium prosthesis subjected to uni-axial loads and pure bending moment. It is concluded that the developed beam theory can be used to predict the long-term behavior of the femur and thus to design the artificial hip prosthesis.

• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.100-107
• /
• 2018

초고강도 섬유보강 콘크리트 50M 합성 박스거더에 대한 재료적 비선형 및 기하학적 비선형 유한요소해석이 수행되었다. 인장과 압축구역에서 구성방정식을 실험에 근거하여 모델링하였다. 비선형 유한요소해석의 정확성은 UHPFRC 50M 합성거더의 실험 결과와 비교하여 검증하였다. 1.5% 체적대비 섬유혼입률, 135MPa 압축강도 및 18MPa 휨인장강도 특성을 가진 UHPFRC 50M 합성거더에 대한 휨실험이 수행되었다. 포스트텐션힘으로 결합된 UHPFRC 합성거더는 3개의 UHPFRC 분절 U거더와 고강도 철근콘크리트 슬래브로 구성되었다. Midas FEA를 사용하여 UHPFRC 거더 부분은 8개 절점을 가진 3차원 6면체 모델링을 하였고, 철근와 강연선은 2개 절점을 가진 선형 요소로 모델링하였다. Total strain crack 모델에 기반을 둔 압축 및 인장 다중 선형모델을 사용하여 구성방정식을 설정하였고 균열은 smeared crack model로 구성하였다. 철근과 강연선의 비선형성은 Von Mises 규준을 적용하였다. 비선형 정적해석은 Newton-Rhapson 기법의 수렴치를 사용한 점진적 반복기법을 사용하여 해를 수행하였다. 유한요소해석은 하중-변위관계, 중립축 변화관계 및 균열양상에 대하여 실험 결과와 수치 해석 결과를 비교하여 검증하였다. 하중-변위 관계는 실험 결과와 비교해볼 때 매우 정확한 결과를 보여주고 있다. 본 논문에서 수행한 비선형 유한요소해석법은 철근보강 포스트텐션닝 초고강도 섬유보강 합성 박스거더의 휨거동 해석에 만족한 결과를 보여주고 있다.

• 대한토목학회논문집
• /
• 제5권3호
• /
• pp.49-59
• /
• 1985

탄성(彈性) 이론(理論)에 의하여 트러스의 형상최적화(形狀最適化) 문제(問題)를 형성(形成)하게 되면 부재(部材)의 단면적(斷面積)과 절점(節點)의 좌표(座標)를 동시에 고려(考慮)해야 하는 복잡(複雜)한 비선형(非線型) 계획문제(計劃問題)가 된다. 이런 비선형(非線形) 계획문제(計劃問題)를 해석(解析)할 수 있도록 제시(提示)된 기법(技法)이 별로 없고 현재 사용(使用)하고 있는 기법(技法)들도 실제(實際)의 적용(適用)에 제한(制限)을 받는 경우가 많다. 그러므로 트러스의 형태(形態), 재하조건(載荷條件) 등에 구애됨이 없이 트러스의 형상(形狀)을 최적화(最適化)할 수 있는 일반(一般) 해석기법(解析技法)이 필요(必要)한 것이다. 이에 본연구(本硏究)에서는 전(全) 해석과정(解析過程) two-phases로 나누어 phase 1 에서는 단면(斷面)을 최적화(最適化)하고 phase 2 에서는 트러스의 절점좌표(節點座標)를 변수(變數)로 하여 형상(形狀)을 최적화(最適化)하는 알고리즘을 개발(開發)한 것이다. 이 알고리즘의 phase 1 에서 유도(誘導)된 비선형(非線型) 계획문제(計劃問題)를 SUMT 문제(問題)로 변환(變換)시켜 Modified Newton-Raphson Method에 의한 SUMT 법(法)을 채택(採擇)하고 phase 2 에서는 Rosenbrock Method의 일방향(一方向) 탐사기법(探査技法)에 의해 목적함수(目的凾數)만이 최소(最小)가 되도록 하는 기법(技法)을 도입(導入)하여 최적화(最適化) 알고리즘 개발(開發)하였다. 개발(開發)된 알고리즘을 트러스의 형태(形態), 설계제약조건(設計制約條件), 재하조건(載河條件) 등을 변화(變化)시켜 가면서 수종(數種)의 트러스에 적용(適用)하여 수치계산(數値計算)을 실시(實施)하고 그 결과(結果)를 다른 알고리즘의 결과(結果)와 정교(正較)하므로서 개발(開發)된 알고리즘의 타당성(妥當性) 안정성(安定性) 적용성(適用性)을 검토(檢討)하였다. 연구(硏究) 결과(結果) 개발(開發)된 이 two-phases 알고리즘은 트러스의 설계조건(設計條件)에 구애받지 않고 트러스의 형상최적화(形狀最適化)에 적용(適用)할 수 있으며 안정성(安定性)있게 빠른 속도(速度)로 최적해(最適解)에 수렴(收斂)한다는 사실(事實)이 확인(確認)되었다. 이에 본(本) 알고리즘을 트러스의 형상최적화(形狀最適化) 알고리즘으로 새로이 제안(提案)하고 본(本) 알고리즘이트러스의 경제적(經劑的)인 설계(設計)에 도움을 줄 수 있을 것으로 사료(思料)된다.