• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.46-55
• /
• 2013

Recently, there are growing interests on carbon emissions related in climate change which is worldwide emerging important issue. Some research works are now carrying out in order to reduce the carbon emission in pulp and paper industries by the synthesis of precipitated calcium carbonate using the exhaust carbon dioxide from combustion furnace or incinerator. However, for solving the original problems on carbon emission, we need to consider the analysis of basic methodology on $CO_2$ through the process efficiencies. There are two general tools for carbon emissions; one is the greenhouse gas inventory and the other is $LCCO_2$ method which is applied to particular items of raw materials and utilities in unit process. In this study, the carbon emissions in wood-containing printing paper production line were calculated by using $LCCO_2$ method. The general materials and utilities for paper production, such as fibrous materials, chemical additives, electric power, steam, and industrial water were analyzed. As the results, $Na_2SiO_3$ showed the highest loads in carbon emissions, and the total amount of carbon emissions was the highest in electricity. In the production line of printing paper using de-inked pulp and BTMP, as the mixing ratio of DIP was higher, the carbon emissions were decreased because of high use of electric power in TMP process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.164-169
• /
• 2015

Nowadays blending ratio of OMG (old magazine) in recovered paper used for manufacturing newspaper have been increased. When large amount of OMG is consumed in newsprint mill, brightness can be improved by inorganic pigments of coating layer. On the other hand decrease in yield of deinking process will be encountered because the pigments can be removed as reject of froth flotation process. Therefore selection of the optimal deinking agent is an important. Non-ionic surfactant have been used widely in newsprint mill. Non-ionic surfactant has amphoteric characteristics. Hydrophilic group is ethylene and propylene oxide that can induce hydrogen bonding with water molecules. In this regard, cloud point is an important parameter in order to control efficiency of deinking process because hydration of the hydrophobic group can be varied according to temperature of a system. In this study, deinking properties of ONP at high blending ratio of OMG was analyzed according to cloud points of non-ionic surfactants. $L^*$, $a^*$, $b^*$, brightness and effective residual ink concentration did not affected by the change of cloud points. Especially, flotation reject decreased significantly according to increase in cloud point of the non-ionic surfactant. Consequently, when a nonionic surfactant having a cloud point higher than the temperature of the system is used, properties of the deinked pulp can be maintained and yield of deinking process can be improved.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.432-443
• /
• 2008

Fast fashion is widely accepted in young generation who are eager to the new fashion trends. With the consumers' rapid adoption of fast fashion, fashion retailers have tried to adopt strategies to reflect current and emerging trends as quickly as possible and effectively in current merchandise assortment, raises important issues with respect to the processes of effective merchandise management. However, the concept of fast fashion has not been academically investigated and developed properly yet. Therefore, this study mainly reviewed secondary data such as leading fast fashion companies' website, newspaper articles and Zara's case study which covers fast fashion issues. Fast fashion gets widely spreading in market, current investigation showed that domestic fashion companies have adopted fast fashion concept in early stage. This study tried to examine characteristics and strategies used by fast fashion businesses to provide domestic fashion industry with valuable information of production and marketing strategies. Suggestions through the result are as follows: 1. Fast fashion requires flexible managing systems such as SCM, QRS and JIT in order to promote efficient production and assortment management from the entire supply chain. 2. Domestic fast fashion companies should build up not only quality of good design but also reasonable price and strengthen marketing strategies in order to compete with abroad fashion companies 3. Fashion companies that succeed in satisfying consumer's desire for new trend show that it has been successful their strategy to make market area wider to the world not focusing on domestic market.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.27-34
• /
• 2014

In-situ $CaCO_3$ formation onto recycled wood pulp was studied to improve optical properties and ash attachment to the fiber furnish in papermaking. We controlled initial reaction temperature of in-situ $CaCO_3$ formation method from $30^{\circ}C$ to $50^{\circ}C$. It was found that the attachment of newly formed $CaCO_3$ to recycled fibers, old newspaper (ONP) in this case, was stronger than that of ground calcium carbonate (GCC, mean dia. $2.4{\mu}m$) addition case, but was not much different among those formed at different temperature. Morphologies of newly formed $CaCO_3$ were changed according to the reaction temperature. More aragonite shape was seen at higher temperature. In-situ $CaCO_3$ formation increased brightness and lowered ERIC value of ONP sheet greatly at the same level of ash contents when compared to GCC addition method, but gave equivalent ERIC and brightness when compared to those of the precipitated calcium carbonate (PCC) addition method. However, tensile strength of the handsheets of the in-situ $CaCO_3$ formation method were much greater than those of the PCC addition method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.19-26
• /
• 2014

In-situ $CaCO_3$ formation on recycled wood pulp was studied to improve optical property and filler attachment to the fiber furnish in papermaking. We tried to attach calcium oxide (CaO) to the recycled fibers, old newspaper (ONP) in this case, by using selected polymers before in-situ $CaCO_3$ formation reaction on fibers, and then, $CO_2$ was injected to the furnish until all the CaO on fiber surfaces was consumed. It was found that the attachment of newly formed $CaCO_3$ to recycled fibers became stronger by attaching CaO to the fibers before in-situ $CaCO_3$ formation reaction. It was expected that the polymers used for the attachment of calcium source to the fiber furnishes helped to keep the newly formed $CaCO_3$ strongly attached to the fiber surface as well as to retain the impurities associated with calcium source and recycled fibers, if any. In-situ $CaCO_3$ formation gave higher brightness and much less ERIC value in ONP sheet than the case when the equivalent amount of GCC was added to the furnish.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.9-18
• /
• 2014

London Convention on the prevention of marine pollution by dumping of wastes and other matter prohibits the deliberate disposal of paper mill sludges at sea. In order to explore the alternative plan on the prohibition of sludge disposal at sea, the biodegradable seedling pot was developed by mixing the sludge with old newspaper (ONP) in appropriate mixing ratios. The C/N ratio of the mixed sludge was below 20, leading to rapid deterioration of the organic matters composing the seedling pot. The increased ONP contents in the seedling pot resulted in the increase of pot thickness and thereafter in the decrease of pot density. Cellulose fibers in ONP promoted water absorption of the pot but AKD addition helped the seedling pot to repel water during raising seedling. Breaking length and burst strength of the seedling pot were improved by addition of wet strength additives but air permeability was a little diminished. Biodegradable rate of the seedling pot in a soil was accelerated by the attack of soil microbes at the beginning, and finally the pot was completely degraded in 150 days in a soil.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.5
• /
• pp.1-14
• /
• 2020

This study conducted a topic modeling and semantic network analysis of 'korean wave' and its meaning in Korean society from 2000 to 2019 by applying an agenda setting theory. For this purpose, a total of 197,992 newspaper articles which reported 'korean wave' issues were analyzed by applying topic modeling and semantic network analysis. As a result, first, the word 'korean wave' mainly appeared in korean-related regions in the korean press. culture and economy. second, a total of 9 topics related to korean wave issues appeared. This was followed by 'broadcast', 'export', 'domestic and foreign affairs', 'education', 'beauty and fashion', 'music and performance', 'tourism', 'media(platform)', and 'region'. Lastly, korean wave was mainly discussed at the cultural and economic ares. In addition, it was clustered into five characteristics: 'cultural hallyu', 'business hallyu', 'education', 'environment', and 'geography'.

• Journal of Fashion Business
• /
• v.27 no.1
• /
• pp.110-125
• /
• 2023

Virtual idol groups are a product of changes in cultural content and development of digital technology. The purpose of this study is to derive the characteristics of technical expression and fashion of virtual idol groups of Korean entertainment companies, and the significance of this study is to provide basic data for creating a new content business model for virtual idol groups. The research method of this study consisted of literature research and case analysis. Korean virtual idol groups 'K/DA', 'Aespa', and 'Eternity', which show the evolved business model of the entertainment industry through rapid advances in digital technology, were selected as the subject of case analysis for this study, and newspaper articles were searched by keywords and analyzed. As a result of the study, the technical expressions shown in Korean virtual idol groups were 'implementation of realistic content through interaction technology', 'delicate motion expression through motion capture technology', and 'convergence of information between the real world and virtual world through AR technology', 'provision of experience similar to reality by VR technology' and 'formation of cultural contents by Deep Real technology' were deriven. In addition, the characteristics of the Korean virtual guide idol group's fashion are 'marketing strategy through collaboration with fashion items', 'giving recognition as a digital fashion icon of real existence', 'creating a sensuous image as a fashion brand ambassador' and 'fashion style expression of the Z generation's sensibility'.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.131-143
• /
• 2022

Focusing on FinTech keywords, this study is analyzing newspaper articles and Twitter data by using text mining methodology in order to understand trends in the industry of domestic digital financial service. In the growth of FinTech lifecycle, the frequency analysis has been performed by four important points: Mobile Payment Service, Internet Primary Bank, Data 3 Act, MyData Businesses. Utilizing frequency analysis, which combines the keywords 'China', 'USA', and 'Future' with the 'FinTech', has been predicting the FinTech industry regarding of the current and future position. Next, sentiment analysis was conducted on Twitter to quantify consumers' expectations and concerns about FinTech services. Therefore, this study is able to share meaningful perspective in that it presented strategic directions that the government and companies can use to understanding future FinTech market by combining frequency analysis and sentiment analysis.

• Korean journal of communication and information
• /
• v.43
• /
• pp.359-384
• /
• 2008

Nowadays, newspaper industry faces a crisis in terms of two aspects: First, in this multi-channel era, it has competed with the online journalism appearing in many digital media. Second, with the decrease of numbers of readers and political participation, the roles of newspaper has to be changed accordingly. The concept of civic journalism emerged as a solution in this context. The purpose of the study is to explore the factors in how journalists perceive the civic journalism. The Q-methodology was adapted to identify the factors composing of the belief, values, attitudes, ideas, and opinions toward the civic journalism. Total of 24 Q-sample (statements) were sorted by 27 P-sample (journalists) who were selected by their gender, years of service, and the like. The Quanl program finally produced 3 factors that were interpreted and named as follows: Factor I, the Complimentary Journalism, the civic journalism would fulfill the functions that traditional journalism has neglected. Factor II, the Alternative Journalism inducing the citizen's participation in the public areas. Factor III, the Functional Journalism, emphasizing dysfunction of the civic journalism.