• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.61-65
• /
• 2010

The performance of slopes during earthquake is often accessed in terms of permanent deformation. In the assessment of permanent deformation, Newmark-type rigid block analysis is widely used. Original Newmark-type block approach, however, assumes the potential sliding mass to be rigid, and has been criticized to be potentially unconservative. The paper reviews analytically the impact of this noncompliance assumption on computed permanent deformations. The results indicate that there is a simple criterion that can be used to determine the level of conservativeness of the rigid block approach in cases of gently-sloping slip surfaces and retaining walls.

• 한국지진공학회논문집
• /
• 제18권4호
• /
• pp.161-170
• /
• 2014

Newmark-type deformation analysis has rarely been done in Korea due to the popularity of simple pseudo-static limit equilibrium analysis and detailed time-history FE/FD dynamic analysis. However, the Korean seismic dam design code updated in 2011 prescribes Newmark-type deformation analysis as a major dynamic analysis method for the seismic evaluation of fill dams. In addition, a design PGA for dynamic analysis is significantly increased in the code. This paper aims to study the seismic evaluation of four existing large fill dams through advanced FEM/Newmark-type deformation analyses for the artificial earthquake time histories with the design PGA of 0.22g. Dynamic soil properties obtained from in-situ geo-physical surveys are applied as input parameters. For the FEM/Newmark analyses, sensitivity analyses are performed to study the effects of input PGA and $G_{max}$ of shell zone on the Newmark deformation. As a result, in terms of deformation, four fill dams are proved to be reasonably safe under the PGA of 0.22g with yield coefficients of 0.136 to 0.187, which are highly resistant for extreme events. Sensitivity analysis as a function of PGA shows that $PGA_{30cm}$ (a limiting PGA to cause the 30 cm of Newmark permanent displacement on the critical slip surface) is a good indicator for seismic safety check. CFRD shows a higher seismic resistance than ECRD. Another sensitivity analysis shows that $G_{max}$ per depth does not significantly affect the site response characteristics, however lower $G_{max}$ profile causes larger Newmark deformation. Through this study, it is proved that the amplification of ground motion within the sliding mass and the location of critical slip surface are the dominant factors governing permanent displacements.

• 한국지반공학회논문집
• /
• 제23권12호
• /
• pp.117-124
• /
• 2007

지진으로 인해 사면에 발생한 영구적 변형 계산시 고려된 공간평균과 유연도의 영향을 조사하였다. 현재 변위계산에는 Newmark이 제안한 강체블럭해석기법이 이 기법의 효율적인 계산능력으로 인해 광범하게 사용되고 있다. 그러나 이 해석기법은 지진응답해석과 변위해석을 별도로 수행하는 소위 분리해석법을 채택하고 있다. 당초의 Newmark 해석기법은 활동토사를 강성체로 가정했으며 이로 인하여 비보수적 결과가 도출될 수 있다는 비판을 받아왔다. 본 논문은 Newmark-형식의 해석에서 강성체 가정의 영향을 검토하였다. 활동토사에 작용하는 지진하중의 전체 효과를 공간평균기법을 사용하여 평가하였으며 그 결과를 주파수 영역에서 분석하였다. 해석결과로부터 활동토사의 유연도 수준을 결정하는 경우 사용할 수 있는 단순한 지표를 제시하였다.

• 한국지반공학회논문집
• /
• 제33권7호
• /
• pp.29-41
• /
• 2017

지진파로 인하여 발생되는 지진하중은 발생 특성상 예측이 불가능한 불확실성이 존재한다. 또한 비탈면과 같은 지반구조물에는 지반정수의 불확실성이 존재한다. 따라서 이러한 불확실성들을 확률론적 해석으로 고려할 필요가 있다. 본 연구에서는 깎기비탈면에 대하여 확률론적 해석으로 구조물의 안전성을 평가하는 대표적인 방법인 취약도 곡선을 작성하는 방법을 제시하였다. 지반정수의 불확실성을 고려한 취약도 곡선은 Monte Carlo Simulation 기법을 이용해 유사정적 해석으로 작성하였다. 지진파의 불확실성을 고려한 취약도 곡선은 30개의 실제 발생한 지진파로 시간이력해석을 실시하여 Newmark-Type 변위 해석으로 작성하였으며, 취약도 곡선은 최대 우도 추정법을 이용하여 대수정규분포를 갖는 누적 확률분포 함수로 나타내었다.

• Computational Structural Engineering : An International Journal
• /
• 제2권1호
• /
• pp.43-50
• /
• 2002

This paper presents a method to predict dynamic responses of floating bodies in the time domain. Because of the frequency-dependence of the radiation wave forces, the memory effect must be taken into account when the responses are evaluated in the time domain. Although the formulations firstly developed by Cummins (1962) have been well-known for this purpose, the effective numerical procedure has not been established yet. This study employs FFT (Fast Fourier Transform) algorithm to evaluate the memory effect function, and the equations of motion of an integro-differential type are solved by Newmark-β method. Numerical examples for a truncated circular cylinder have indicated the effectiveness of the proposed numerical procedure.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.241-253
• /
• 2017

In this paper, dynamic response of the horizontal nanofiber reinforced polymer (NFRP) strengthened concrete beam subjected to seismic ground excitation is investigated. The concrete beam is modeled using hyperbolic shear deformation beam theory (HSDBT) and the mathematical formulation is applied to determine the governing equations of the structure. Distribution type and agglomeration effects of carbon nanofibers are considered by Mori-Tanaka model. Using the nonlinear strain-displacement relations, stress-strain relations and Hamilton's principle (virtual work method), the governing equations are derived. To obtain the dynamic response of the structure, harmonic differential quadrature method (HDQM) along with Newmark method is applied. The aim of this study is to investigate the effect of NFRP layer, geometrical parameters of beam, volume fraction and agglomeration of nanofibers and boundary conditions on the dynamic response of the structure. The results indicated that applied NFRP layer decreases the maximum dynamic displacement of the structure up to 91 percent. In addition, using nanofibers as reinforcement leads a 35 percent reduction in the maximum dynamic displacement of the structure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1261-1267
• /
• 2005

At this paper Dynamic respones of bridges for the Korean high-speed railway are analyzed by a modal analysis. To control vibration of bridges, Tuned Mass Damper(TMD) that is passive type control device is used. Opimize and prove it. Newmark method is used for a numerical analysis. In case of vehicle is modeled for moving mass that considers the effects of the moving. Also this paper is assumped as the simple supported Bernoulli-Euler beam and considered two dimensional Interaction motion between vehicle and bridge.

• 한국해양공학회지
• /
• 제28권5호
• /
• pp.371-377
• /
• 2014

In this study, the hydrodynamic characteristics of various types of jack-up legs for a wind turbine installation vessel were analyzed. Using the modified Morison equation, the wave and current excitation forces on the jack-up legs were calculated. A modal analysis was performed to predict the dynamic responses for various types of jack-up legs. The Newmark-beta time integration scheme was used to solve the equation of motion in waves in the time domain. The maximum displacement and maximum bending stress were computed for four different types of legs, and their results were compared to select an optimum leg type. Finally, a six-leg jack-up rig with the selected optimal legs was modeled, and its natural period and hydrodynamic behaviors were evaluated.

• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.11-23
• /
• 1989

본 논문에서는 guyed tower의 mooring system에 관한 수치해석결과를 제시하였다. 가상일의 원리와 유한요소법을 사용하여 기본식을 유도하였으며 케이블의 기하학적 비선형성을 고려하였다. 유체의 항력과 관성력은 Morrison식을 사용하여 고려하였으며 비선형 운동방정식의 해는 Newton-Raphson방법과 Newmark-${\beta}$ 방법을 사용하여 구하였다. Tower와 mooring line의 부착점에서의 초기경사각, 인장력, clump weight를 집중하중으로 이상화 시키는 종래의 해석방법의 문제점도 아울러 고찰하였다. 수치해석 예를 통하여 본 논문에서의 해석방법의 정당성을 입증하였다.

• 대한조선학회지
• /
• 제23권2호
• /
• pp.33-45
• /
• 1986

In the present paper, the nonlinear analysis of dynamic response of the jacket type offshore structures subject to nonlinear fluid force is performed. Furthermore, several analysis methods, such as quasi-static analysis, Newmark-$\beta$ method and state vector time integration technique, and described and compared with each others in order to investigate the efficiency numerical of the schemes for this kind of nonlinear structural analysis. In the problem formulation, various environmental forces acting on the jacket type offshore structure have been studied and calculated. Particularly, hydrodynamic forces are calculated by using the Morison type formula, which contains the interaction effect between the motion of the structure and the velocity of fluid particles. Also, Stokes' 5th order wave theory and Airy's linear wave theory are used to predict the velocity distribution of the fluid particles. Finally, the nonlinear equation of motion of the structure is obtained by using three-dimensional finite element formulation. Based on the above procedures, two examples, i.e. a single pile and a typical offshore jacket platform, are studied in details.