• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.188-194
• /
• 2007

We propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware. We will have developed an algorithm that will design multi-hierarchy Layered networks to simulate a desired system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.142-152
• /
• 2010

When a mobile station(MS) performs a handover, in the IEEE 802.11 WLAN, MS's channel scanning for discovering new available APs is the dominating factor in handover latency, accounting 90% of overall latency. In order to reduce such a scanning latency, we focus on the method for reducing the number of channels for the MS in handover process to scan. With the help of IEEE 802.21 information server(IS), a proper order of groups of channels to be scanned is offered by the current AP depending on the information of neighbor APs in terms of the distance from serving AP, traffic load and network topology. By using this scanning order, the passive scanning of a MS in normal operation enables the MS to filter out the unavailable channels, and thus to classify the candidate channels of neighbor APs into three groups. Then, a handover-imminent MS can perform the active scanning from the most reliable group of channels. Simulation results show that the proposed scanning scheme reduce the scanning latency in comparison with the conventional scheme.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.145-150
• /
• 2007

The spacer grid set is a component in the nuclear fuel assembly. The set supports the fuel rods saftely. Therefore, the spacer gl1d set should have sufficient strength for the external impact forces. The fretting wear occurs between the spring of the fuel rod and the spacer grid due to tile flow-induced vibration. The conceptual design of the spacer grid set is performed based on the Independence Axiom of axiomatic design. Two functional requirements are defined and corresponding design parameters are selected. The overall flow of the design is defined according to the application of axiomatic design. The design for the impact load is carried out by using nonlinear dynamic analysis to determine the length of the dimple. Topology optimization is carried out to determine a new configuration of the spring. The fretting wear is reduced by shape optimization using the homology theory. In the design to reduce the fretting wear, the deformed shape of the spring should be the same as that of the fuel rod. This condition is transformed to a function and considered as a constraint in the shape optimization process. The fretting wear is expected to be reduced due to the homology constraint. The objective function is minimizing the maximum stress to allow a slight plastic deformation. Shape optimization results are confirmed through nonlinear static analysis because the contact area becomes wider.

• Journal of Digital Contents Society
• /
• v.16 no.6
• /
• pp.909-916
• /
• 2015

This paper presents a method to display the 3D vector fields by analyzing phase space. This method is based on the connections between ordinary differential equations and the topology of vector fields. The phase space analysis should be geometric interpolation of an autonomous system of equation in the form of the phase space. Every solution of it system of equations corresponds not to a curve in a space, but the motion of a point along the curve. This analysis is the basis of this paper. This new method is required to decompose the hexahedral cell into five or six tetrahedral cells for 3D vector fields. The critical points can be easily found by solving a simple linear system for each tetrahedron. The tangent curves can be integrated by finding the intersection points of an integral curve traced out by the general solution of each tetrahedron and plane containing a face of the tetrahedron.

• Spatial Information Research
• /
• v.17 no.4
• /
• pp.445-454
• /
• 2009

Beyond simple transfer of information through sensor network, this study will provide the insights about the way to embody the real context aware location based service in an ubiquitous computing environment. In this paper, a new formal approach is introduced to derive knowledge about the scope of influence for a point object. A scope of influence is defined as the conceptual area where there is a possibility of the phenomenon or event occurring because of this point object. A point object can be spatially extended by considering this scope of influence in conjunction with the point. These point objects are called Spatially Extended Point (SEP) objects. Compositions of gradual changes of topological relations between a SEP and the environment near the SEP show how to represent the qualitative spatial behaviors of a SEP objects. These qualitative spatial behaviors will be good standards for Location Based Service (LBS) to provide more subdivided and suitable information to the users.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.423-434
• /
• 2004

In this paper, we introduce a new topology of Self-Organizing Polynomial Neural Networks (SOPNN) based on genetically optimized Multi-Layer Perceptron (MLP) and discuss its comprehensive design methodology involving mechanisms of genetic optimization. Let us recall that the design of the 'conventional' SOPNN uses the extended Group Method of Data Handling (GMDH) technique to exploit polynomials as well as to consider a fixed number of input nodes at polynomial neurons (or nodes) located in each layer. However, this design process does not guarantee that the conventional SOPNN generated through learning results in optimal network architecture. The design procedure applied in the construction of each layer of the SOPNN deals with its structural optimization involving the selection of preferred nodes (or PNs) with specific local characteristics (such as the number of input variables, the order of the polynomials, and input variables) and addresses specific aspects of parametric optimization. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between the approximation and generalization (predictive) abilities of the model. To evaluate the performance of the GA-based SOPNN, the model is experimented using pH neutralization process data as well as sewage treatment process data. A comparative analysis indicates that the proposed SOPNN is the model having higher accuracy as well as more superb predictive capability than other intelligent models presented previously.reviously.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding two switcher, two lossless snubber quasi-resonance capacity, two diode to power source for general welding machine. This half bridge soft switching Is low voltage hight current output that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.181-190
• /
• 2005

In accordance with the rapid growth of digital media in 1990s, the state of indetermination that is found in digital process has been emphasized in the field of natural science and philosophy. Digitalized space design has been dramatically developed and it raised heated debate and comment on 'folded space' The purpose of this thesis is to explore how the cognitive-ecological factors constitute fold structures in space design of the late 20th century. Syntax of space structure and geometric composition were analyzed to define what types of cognitive-ecological factors are contrived in the process of visual information. In particular, I put higher theoretical emphasis on what characteristics are ensued in the process of structuring spaces than any other subjects. Through theses analyses and discussions, I raised questions on what principles are operating to create new space design that counts on non-linear structure and its formational process. And I also observed what influences these structural principles of design could fundamentally bring to human beings. First, I proposed that we could overcome reductionist space design through cognitive-ecological approach. Some key concepts such as affordance, parallel processing, and redundancy were adopted as defining elements of non-linear structures. As a result of analyses, I found that the cognitive-ecological approach could substitute the reductionist space design of the past. What is also found is that the three variables are the ultimate ecological elements. In addition, as a methodological concept of fold structures, the form of 'topology' was highlighted because it could be a supporting idea to the cognitive-ecological factors. Second, I claimed that non-linear design is more experiential than rational linear design, and it is more efficiently correspondent to human being than any other forms. What is intended and implied in non-linear structure is also indicated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1114-1122
• /
• 2018

In this paper, we propose a theoretical framework for provisioning marginal resources in wired and wireless computer networks which include Internet. In more detail, we propose a mathematical model for the upper bounds of marginal capacity in grid networks, where the resource is designed a priori by normal traffic estimation and marginal resource is prepared for unexpected events such as natural disasters and abrupt flash crowd in public affairs. To be specific, we propose a method to evaluate an upper bound for minimum marginal capacity for an arbitrary grid topology using the concept of a strong Roman domination number. To that purpose, we introduce a graph theory to model and analyze the characteristics of general grid structure networks. After that we propose a new tight upper bound for the strong Roman domination number. Via a numerical example, we show the validity of the proposition.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.1-8
• /
• 1999

In this paper, we have proposed and evaluated the performance of the routiong protocols servicing the mobile and fixed subscribers in a large e scale circuit switched telecommunication network, connected by gateways. The large scale network consists of several subnetworks, and a subnetwork is composed of $M{\times}N$ nodes in grid topology. When a call for mobile subscriber occurs, the current routing protocols search the whole large scale network to find a mobile subscriber. Therefore, it causes many redundant packets and long call setup delay. So, we have proposed a new routing protocol, in which the destination subscriber is first searched at the subnetwork where the call is proposed protocol is better than that of the current protocol.