• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.1001-1009
• /
• 2002

본 연구는 반복 수평하중을 받는 철근 콘크리트 T형 벽체의 횡철근의 구속범위를 제안하기 위한 것이다. 횡철근의 구속범위는 압축과 인장변형율 분포에 의해 좌우되는 중립축을 기준으로 압축변형율과 콘크리트 극한 변형율의 분포에 따라 결정된다. 압축변형율은 바닥층 평면적에 대한 벽 단면비, 형상비, 단면형상, 압축력, 그리고 철근비 등에 따라 다르게 나타난다. T형 벽체의 중립축은 플랜지의 영향으로 정가력과 부가력이 다르게 나타나며, T형 벽체의 중립축이 직사각형 벽체와 다르기 때문에 압축콘크리트를 구속하여 주는 횡철근의 구속범위가 다르게 나타날 것으로 판단된다. 또한, 좌우 대칭으로 배근되는 직사각형 벽체는 반복적인 수평하중에 대해 좌우 대칭인 구조적 특성을 나타내지만, T형 벽체의 경우는 좌우 비대칭적인 구조적 특성을 보인다. 즉, 복부 단부가 압축을 받는 정가력인 경우, 중립축 깊이(c)가 직사각형 벽체보다 크게 나타나며, 복부 단부가 인장을 받는 부가력인 경우, 중립축 깊이(c)가 직사각형 벽체보다 작게 나타난다. 그러므로, T형 벽체를 직사각형 벽체로 가정하여 좌우대칭으로 횡철근을 구속할 경우, 압축을 받는 복부 단부에서 요구되는 횡철근의 구속범위가 증가할 것으로 판단된다 따라서, 본연구에서는 T형 벽체의 구조적 특성을 파악하고, 실험값과 기존분석 및 단면해석을 비교함으로써 T형 벽체의 중립축 깊이를 제시하였다.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.16-23
• /
• 2018

Postural instability can increase the likelihood of hazardous slip and fall accidents in workplaces. The present study intended to extend understanding of the effect of abnormal neck posture on postural control during quiet standing. The effect of body fatigue on the postural control was also of primary concern. Twelve healthy undergraduate students volunteered to participate in the experiment. Standing on a force platform with the neck neutral, flexed, extended, or rotated, subjects' center of pressures (COP) were measured under the two levels of body fatigue. For the fatigue condition, Subjects exercised in a treadmill to meet the predetermined level of body fatigue. Analyzing the position coordinates of COPs, the length of postural sway path was assessed in both medio-lateral (ML) axis and anterior-posterior (AP) axis. Results showed that, in AP direction, neck extension or rotation significantly increased the sway length as compared with neck neutral. Neck extension led to greater sway length compared to neck rotation. Neck flexion did not differ from neck neutral. The sway length in the AP direction also became significantly larger as the body fatigue accumulated after treadmill exercise. In ML direction, as compared to neutral posture, the neck extension, flexion, or rotation did not significantly affect the length of postural sway path. However, the sway length seemed to increase marginally with the neck extended during the fatigued condition. This study demonstrates that abnormal neck posture may interfere with postural control during standing. The ability to maintain postural stability decreases significantly with the neck extended or rotated. Body fatigue leads to postural instability further.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.967-973
• /
• 1995

A neutral particle beam(NPB) aimed at the object and receive a small number of neutron signals at the detector to estimate the mass of an object Since there is uncertainty about the location of the axis of the beam relative to the object, we could have aiming errors which may lead to incorrect information about the object. Under the two assumptions that neutral particle scattering distribution and aiming errors have a circular normal distribution respectively, we have derived an exact probability distribution of neutral particles. It becomes a Poison-power function distribution., We proved monotone likelihood ratio property of tlis distribution. This property can be used to find a criteria for the hypothesis testing problem.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.253-260
• /
• 1998

본 논문에서는 장기지속하중을 받는 철근콘크리트 보의 처짐을 계산하는 방법을 제안하였다. 균열단면에 대하여 적합조건 및 평형조건을 적용하여 크리프에 의한 중립축의 변화를 계산하는 효율적인 알고리즘을 제시하였으며, 이 값을 이용하여 임의의 시간에서의 휨강성을 유도하였다. 그리고 유사한 방법으로 비균열단면에서의 휨강성을 계산하고 균열단면과 비균열단면에서 각각 계산된 휨강성을 사용하여 ACI규준식의 유효단면 2차모멘트를 계산하는 것과 유사한 방법으로 휨강성을 계산하여 지속하중을 받는 철근콘크리트 보의 처짐을 예측하는 방법을 제시하였다. 제안된 방법과 기존의 실험결과를 비교하여 볼 때, 제안된 방법이 장기지속하중을 받는 철근콘크리트보의 처짐을 잘 예측하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.816-825
• /
• 2002

During the manufacture of a ship, longitudinal deformation is produced by fillet welding on the BuiltUp beam used to improve the longitudinal strength of a ship. This deformation needs a correcting process separate from a manufacture process and decreases productivity and quality. This deformation is caused by welding moment, which is the value multiplied the shrinking force due to welding by the distance from the neutral axis on a cross section of Built-Up beam. This deformation can be offset by generating a moment which is the same magnitude with and is located in an opposite direction to the welding moment on web plate by induction heating. Accordingly, this study clarifies the creation mechanism of the longitudinal deformation on Built-Up beam with FEM analysis and presents the preventative method of this deformation by induction heating basing the mechanism and verifies its validity through analysis and experiments. The induction heating used here is performed by deciding its location and quantity with experiments and simple equations and by applying them to areal structure.

• KIEAE Journal
• /
• 제11권1호
• /
• pp.9-14
• /
• 2011

Currently, the multi-residential apartments used in Korea are mostly bearing wall apartments which don't satisfy consumers for the lack of architectural plan flexibility. And due to remodelling-incompatible, bearing wall apartments have to be reconstructed. It is, thus, necessary to develop multi-residential apartments utilizing composite beam that can replace the conventional bearing wall-type apartment buildings. Composite beams proposed in this paper ensure modification of space and quality control, while the floor heights are maintained at the same floor height as in bearing wall structures. This study analyzes the experimental behavior of composite beams with proper combination of structural steel, reinforced concrete, and precast concrete. By comparing with the theoretical analysis and experimental results, the accuracy of flexural moment capacity and neutral axis was evaluated. The experiments were performed by two simply-supported specimens using loading and unloading. When the analysis results were compared with the experimental results, the flexural moment capacity of the composite beam was shown with an error of approximately -0.5 to 0.1% at the maximum load limit state.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.306-311
• /
• 1996

This paper persents the flexural behavior of high performance concrete beams having different concrete filling conditions. Three tests were conducted on full-scale beam specimens with design concrete compressive strength of 400 kg/$\textrm{cm}^2$. Different concrete filling conditions were intentionally made such that the first beam specimen was soundly cast to obtain the perfect concrete filling condition. Second beam specimen was cast in such a way that up to the longitudinal tensile reinforcement from the top, good concrete was filled while poor concrete was poured for the bottom part to simulate the poor workamanship, workability and unsatisfactory compaction. Third beam specimens was cast in such a way that up to the neutral axis of the beam section from the top, good concrete was filled while so did for the bottom part as the second beam specimen. The test results were analyzed in terms of load-displacement response, formation of crack, crack width, crack spacing and shift of neutral axis. An evaluation of the ductile response fo three different beam specimens was made in combination with the ultimate load accoding to the three different concrete filling conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.403-408
• /
• 2003

The objective of this study is to understand the variables affected the confinement for the transverse reinforcement of the reinforced concrete structural walls with the T-shaped cross section subjected to cyclic lateral loads. The structural performance of T-shaped walls was advanced by the transverse reinforcement which restrained the concrete subjected to compressive stress. If the arrangement of transverse reinforcement was not suitable for the confinement, T-shaped walls happened the brittle failure by web crushing or bucking of vertical reinforcement at the compression zone. It is necessary to confine transverse reinforcement in order to prevent the these failure. But the location of neutral axis and the magnitude of ultimate strain vary according to the section shape, a ratio of axial load, a ratio of wall cross sectional area to the floor-plan area, an aspect ratio and the reinforcement ratio. Therefore, the objective of this research is to grasp the location of neutral axis and the range which needs for the confinement of transverse reinforcement through the results of the sectional analysis which varies the ratio of axial load and the ratio of vertical reinforcement.

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.185-192
• /
• 2018

Fly ash can significantly improve concrete workability and performance, and recycling fly ash in concrete can contribute to a cleaner environment. Since fly ash influences pozzolanic reactions in concrete, mechanical behaviors of concrete containing fly ash differ from traditional concrete. Creep behaviors of fly ash concrete filled steel tube arch were experimentally investigated for 10% and 30% fly ash replacement. The axes of two arches are designed as circular arc with 2.1 m computed span, 0.24 m arch rise, and their cross-sections are all in circular section. Time dependent deflection and strain of loading and mid-span steel tube were measured, and long term deflection of the model arch with 10% fly ash replacement was significantly larger than with 30% replacement. Considering the steel tube strain, compressive zone height, cross section curvature, and internal force borne by the steel tube, the compressive zone height and structural internal forces increased gradually over time due to concrete creep. Increased fly ash content resulted in more significant neutral axis shift. Mechanisms for internal force effects on neutral axis height were analyzed and verified experimentally.

• Structural Engineering and Mechanics
• /
• 제34권2호
• /
• pp.247-275
• /
• 2010

In this study, experimental, numerical, and analytical approaches were carried out to evaluate the behavior and prestressing effect of prestressed composite beam by external tendon and cover plate. Behavior of prestressed composite beam, load-carrying capacity, effects of prestressing, and ultimate strength were estimated. The contribution of the section increase of the prestressing method using tendon was less than the prestressing method using cover plate. In accordance with numerical and analytical approaches, the ultimate strength of the prestressed composite beam is shown to be the same value because strength is determined according to the plastic resistance moment and the plastic neutral axis; however, both plastic resistance moment and neutral axis are not affected by prestressing force but affected by sectional stiffness of the prestressing member. Based on these approaches, we concluded that the prestressing method using tendon can be useful in applications without an increase in self-weight, and the prestressing method using high-strength cover plate can be applied to reduce the deflection of the composite beam. The prestressing method using high-strength cover plate can also be used to induce prestress of the composite beam in the case of a large deflection due to a smaller sectional stiffness of the composite beam.