Browse > Article
http://dx.doi.org/10.4334/JKCI.2002.14.6.1001

Confinement Range of Transverse Reinforcements for T-shaped Reinforced Concrete Walls  

하상수 (한양대학교 건축공학부)
오영훈 (건양대학교 건축공학과)
최창식 (대진대학교 건축공학과)
이리형 (한양대학교 건축공학부)
Publication Information
Journal of the Korea Concrete Institute / v.14, no.6, 2002 , pp. 1001-1009 More about this Journal
Abstract
The objective of this study is to determine the range of confinement (or the transverse reinforcement of the reinforced concrete structural walls with the T-shaped cross section subjected to cyclic lateral loads. The range of confinement for transverse reinforcement is related to the location of neutral axis and determined by the magnitude and distribution of compressive strain. The compressive strain depends on the ratio of wall cross sectional area to the floor-plan area, the aspect ratio, configuration, the axial load, and the reinforcement ratios. By affection of flange, the neutral axis appears different depending on positive and negative forces and because of this reason, when web and flange are subjected to compressive stress, the range of confinement for the transverse reinforcement of T-shaped walls would shows different result. Therefore this experimental research focused on the structural characteristics of T-shaped walls and suggested the neutral axis depth through comparing the results of this study with sectional analysis.
Keywords
rectangular walls; T-shaped walls; tranverse reinforcement; range of confinement; compressive strain; neutral axis;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 John W. Wallace, "Seismic Design of RC Structural Walls, Part II : Application," Journal cf Structural Eng. Div., ASCE, Jan. 1995, pp.88-101.   DOI   ScienceOn
2 하상수, 오영훈, 최창식, 이리형, "단부구속효과에 따른 RC T형 벽체의 구조성능에 관한 실험적 연구," 대한건축학회 논문집, 제18권, 제6호, 2002.6, pp.39-45.   과학기술학회마을
3 M. J. N. Priestley and M. J. Kowalsky, "Aspects of Drift and Ductility Capacity of Rectangular Cantilever Structural Walls," Bulletin of New Zealand National Society for Earthquake Engineering, Vol. 31, No.6, 1998, pp.73-85.
4 John W. Wallace, "New Methodology for Seismic Design of RC Shear Walls," Journal of Structural Eng. Div., ASCE, March. 1994, pp.863-884.   DOI   ScienceOn
5 C. Chadwel, "UCFYBER : Cross Section Analys is Software for Structural Engineers," University of California, Berkeley, 1999.
6 ACI Committee 318 , "Building Code Requirements for Structural Concrete(318-99) and Commentary (318-99)," 1999.
7 J. B. Mander and M. J. N. Priestley, "Theoretical Stress-Strain Model for Confined Concrete," Journal of Structrual Engineering, Vol. 114, No. 8, August, 1988, pp.1804-1826.   DOI   ScienceOn
8 John W. Wallace, "Seismic Design of RC Structural Walls, Part I : New Code Format," Journal of Structural Eng. Diu., ASCE, Jan. 1995, pp.75-87.   DOI   ScienceOn
9 International Conference on Building Officials, Uniform Building Code, Whittier, California, 1999.