DOI QR코드

DOI QR Code

Evaluation on structural behaviors of prestressed composite beams using external prestressing member

  • Ahn, Jin-Hee (School of Civil and Environmental Engineering, Yonsei University) ;
  • Jung, Chi-Young (School of Civil and Environmental Engineering, Yonsei University) ;
  • Kim, Sang-Hyo (School of Civil and Environmental Engineering, Yonsei University)
  • 투고 : 2009.08.06
  • 심사 : 2009.11.20
  • 발행 : 2010.01.30

초록

In this study, experimental, numerical, and analytical approaches were carried out to evaluate the behavior and prestressing effect of prestressed composite beam by external tendon and cover plate. Behavior of prestressed composite beam, load-carrying capacity, effects of prestressing, and ultimate strength were estimated. The contribution of the section increase of the prestressing method using tendon was less than the prestressing method using cover plate. In accordance with numerical and analytical approaches, the ultimate strength of the prestressed composite beam is shown to be the same value because strength is determined according to the plastic resistance moment and the plastic neutral axis; however, both plastic resistance moment and neutral axis are not affected by prestressing force but affected by sectional stiffness of the prestressing member. Based on these approaches, we concluded that the prestressing method using tendon can be useful in applications without an increase in self-weight, and the prestressing method using high-strength cover plate can be applied to reduce the deflection of the composite beam. The prestressing method using high-strength cover plate can also be used to induce prestress of the composite beam in the case of a large deflection due to a smaller sectional stiffness of the composite beam.

키워드

참고문헌

  1. Ahn, J.H., Jung, C.Y., Kim, J.H. and Kim, S.H. (2009), "Multi-stepwise thermal prestressing using a cover-plate in steel structures", J. Constr. Steel Res., 65, 1464-1479. https://doi.org/10.1016/j.jcsr.2009.03.004
  2. Ahn, J.H., Jung, C.Y., Choi, K.T. and Kim, S.H. (2009a), "Plate girder bridge strengthened with multi-stepwise thermal prestressing method", Adv. Struct. Eng. (in review).
  3. Ahn, J.H., Jung, C.Y., Choi, K.T. and Kim, S.H. (2009b), "Load-carrying capacity evaluation of the composite beam strengthened by multi-stepwise thermal prestressing method using cover-plate", J. Korea Inst. Struct. Maint. Inspection (in press).
  4. Chen, S. and Gu, P. (2005), "Load carrying capacity of composite beams prestressed with external tendons under positive moment", J. Constr. Steel Res., 61, 515-530. https://doi.org/10.1016/j.jcsr.2004.09.004
  5. Fisher, J.W. and Wright, W.J. (2001), "High performance steel enhanced the fatigue and fracture resistance of steel bridge structures", Int. J. Steel Struct., 1(1), 1-7. https://doi.org/10.1296/SCS2001.01.01.01
  6. Korea Highway Bridge Specifications (2005), Korean Ministry of Construction and Transportation.
  7. Lorenc, W. and Kubica, E. (2006) "Behavior of composite beams prestressed with external tendons: experimental study", J. Constr. Steel Res., 62(12), 1353-1366. https://doi.org/10.1016/j.jcsr.2006.01.007
  8. Oehlers, D.J., Nguyen, N.T., Ahmed, M. and Bradford, M.A. (1997), "Partial interaction in composite steel and concrete beams with full shear connection", J. Constr. Steel Res., 41(2/3), 235-248. https://doi.org/10.1016/S0143-974X(97)80892-9
  9. Queiroz, F.D., Vellasco, P.C.G.S. and Nethercot, D.A. (2007), "Finite element modeling of composite beams with full and partial shear connection", J. Const. Steel Res., 63, 505-521. https://doi.org/10.1016/j.jcsr.2006.06.003
  10. Ranzi, G. and Bradford, M.A. (2009), "Nonlinear analysis of composite beams with partial shear interaction by means of the direct stiffness method", Steel Compos. Struct., 9(2), 131-158. https://doi.org/10.12989/scs.2009.9.2.131
  11. Sakano, M., Namiki, H., Yajima, S., Koide, Y. and Furuta, H. (2006) "Frangopol DM. Monitoring of steel railway floor beams prestressed by steel plates", J. Bridge Eng., 11(6), 681-687. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:6(681)

피인용 문헌

  1. Numerical analysis of second-order effects of externally prestressed concrete beams vol.35, pp.5, 2010, https://doi.org/10.12989/sem.2010.35.5.631
  2. Theoretical and experimental study on flexural behavior of prestressed steel plate girders vol.142, 2018, https://doi.org/10.1016/j.jcsr.2017.12.007
  3. Selection of the optimal constellation of hybrid systems for pre-stressing vol.106, 2017, https://doi.org/10.1051/matecconf/201710604021
  4. Design procedure for prestressed concrete beams vol.13, pp.2, 2014, https://doi.org/10.12989/cac.2014.13.2.235
  5. Development and Evaluation of New Connection Systems for Hybrid Truss Bridges vol.11, pp.2, 2013, https://doi.org/10.3151/jact.11.61
  6. Theoretical and experimental research of external prestressed timber beams in variable moisture conditions vol.4, pp.2, 2015, https://doi.org/10.12989/csm.2015.4.2.191
  7. Modal Test on an External Prestressed Steel Beam vol.446-449, pp.1662-8985, 2012, https://doi.org/10.4028/www.scientific.net/AMR.446-449.3123
  8. Ultimate strength of composite structure with different degrees of shear connection vol.11, pp.5, 2010, https://doi.org/10.12989/scs.2011.11.5.375
  9. Software for application of Newton-Raphson method in estimation of strains in prestressed concrete girders vol.10, pp.2, 2010, https://doi.org/10.12989/cac.2012.10.2.121
  10. Stiffness of hybrid systems with and without pre-stressing vol.9, pp.2, 2020, https://doi.org/10.12989/csm.2020.9.2.147