• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2015

This paper presents the design of a low-power, low area 256-radix 16-bit crossbar switch employing a 2D Hyper-X network topology. The Hyper-X crossbar switch realizes the high radix of 256 by hierarchically combining a set of 4-radix sub-switches and applies three modifications to the basic Hyper-X topology in order to mitigate the adverse scaling of power consumption and propagation delay with the increasing radix. For instance, by restricting the directions in which signals can be routed, by restricting the ports to which signals can be connected, and by replacing the column-wise routes with diagonal routes, the fanout of each circuit node can be substantially reduced from 256 to 4~8. The proposed 256-radix, 16-bit crossbar switch is designed in a 65 nm CMOS and occupies the total area of $0.93{\times}1.25mm^2$. The simulated worst-case delay and power dissipation are 641 ps and 13.01 W when operating at a 1.2 V supply and 1 GHz frequency. In comparison with the state-of-the-art designs, the proposed crossbar switch design achieves the best energy-delay efficiency of $2.203cycle/ns{\cdot}fJ{\cdot}{\lambda}2$.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.926-937
• /
• 1996

A graph traversal technique is a certain pattern of visiting nodes of a graph. Many special traversal techniques have been applied to solve graph related problems. For example, the depth first search technique has been used for finding strongly onnected components of a directed graph or biconnected components of a general graph. The distributed protocol to implement his depth first search technique on the distributed network can be divided into a fixed topology problem where there is no topological change and a dynamic topology problem which has some topological changes. Therefore, in this paper, we present a more efficient distributed depth first search protocol with fixed topology and a resilient distributed depth first search protocol where there are topological changes for the distributed network. Also, we analysed the message and time complexity of the presented protocols and showed the improved results than the complexities of the other distributed depth first search protocols.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.160-168
• /
• 2008

We completed a new cluster system based on WDM by proposing virtual topology reconfiguration schemes. The key idea of the proposed scheme Is to construct a set with the longest chains of requests of connecting nodes which need to be assigned a wavelength. All the sets have no common factor, that is, there is no duplicated link among the requests of connecting. After making the set satisfying this condition, we could assign a wavelength to per corresponding set. We could reconfigure a virtual topology with this scheme collectively. we compared our scheme to existing approaches by the OWns simulation tool. As the results, we gained improved performances, reducing 10% of blocking rate and improving 30% of ADM utilization in terms of the blocking probability and the ADM utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1045-1054
• /
• 2006

In this paper, described a design result of bus interface modulo for multiple level MU-SID-1553 data bus network. In general, MIL-SID-1553 network is used for single level data bus topology. But, according to applied system's structure. multiple level bus architecture is required., And for his, micro processor must be involved for system be, and a additional hardware and software functions are needed. The designed data bus interface module is simply consists of communication transceivers and simple electronic circuit without micro processor. Through the hardware testing and software simulation, the functional performance of the designed interface module was successfully validated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.495-502
• /
• 2013

In the mobile Ad hoc Network(MANET), improving technique for management and control of topology is recognized as an important part of the next generation network. In this paper, we proposed an efficient node life time management of ATICC(Adaptive Time Interval Clustering Control) in Ad-hoc Networks. Ad-hoc Network is a self-configuration network or wireless multi-hop network based on inference topology. This is a method of path routing management node for increasing the network life time through the periodical route alternation. The proposed ATICC algorithm is time interval control technique depended on the use of the battery energy while node management considering the attribute of node and network routing. This can reduce the network traffic of nodes consume energy cost effectively. As a result, it could be improving the network life time by using timing control method in ad-hoc networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.155-158
• /
• 1998

다층 신경회로망의 모델의 크기는 적용분야에 따라서 임의로 선택되어지고, 최적의 네트워크 크기는 긴 시간에 걸친 시행착오를 통하여 결정된다. 본 논문에서는 은닉충의 뉴런 수를 학습 과정에서 유동적으로 결정하는 역전파 알고리즘을 제안한다. 기존의 Narendra의 모델의 동정에 대하여 제안한 알고리즘의 유용성을 비교 검토하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.51-57
• /
• 2009

Ubiquitous sensor network is the communication environment where sensor nodes move freely and construct network to get the services from the system. So, it does not need fixed infrastructure and can easily be placed in unaccessible regions like war or calamity area. Wireless sensor network protocol has self-organizing capability, need to adapt topology change flexibly and also has technique that sensor nodes work cooperatively, because network disconnection is frequently occurred due to the active mobility of sensor nodes. In this paper, we design a cluster based fault-tolerant routing protocol for the efficient topology construction and to guarantee stable data transmission in USN. The performance of the proposed protocol is evaluated by an analytic model.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2456-2467
• /
• 2018

Wireless multimedia sensor networks (WMSNs) require real-time quality-of-service (QoS) guarantees to be provided by the network. The end-to-end delay is very critical metric for QoS guarantees in WMSNs. In WMSNs, due to the transmission errors incurred over wireless channels, it is difficult to obtain reliable delivery of data in conjunction with low end-to-end delay. In order to improve the end-to-end delay performance, the system has to drop few packets during network congestion. In this article, our proposal is based on optimization of end-to end delay for WMSNs. We optimize end-to-end delay constraint by assuming that each packet is allowed fixed number of retransmissions. To optimize the end-to-end delay, first, we compute the performance measures of the system, such as end-to-end delay and reliability for different network topologies (e.g., linear topology, tree topology) and against different choices of system parameters (e.g., data rate, number of nodes, number of retransmissions). Second, we study the impact of the end-to-end delay and packet delivery ratio on indoor and outdoor environments in WMSNs. All scenarios are simulated with multiple run-times by using network simulator-2 (NS-2) and results are evaluated and discussed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.537-543
• /
• 2012

Smart home System is shirt-sleeve, the automatic control systems, computer network system and network communication technology in the integration of network intelligent home control system. Intelligent household will let users have a more convenient means to management of domestic equipment, for example, through the house, wireless remote control, touch screen phone and Internet or speech recognition control household devices, more can perform scene operation, make more equipment form linkage. In this paper, we propose the intelligent household various kinds of equipment within each other can communication, do not need to user command according to different state interactive operation, thus to bring the greatest degree of user efficient and convenient, comfortable and safe.