• 물과 미래
• /
• 제25권1호
• /
• pp.101-110
• /
• 1992

유역내 공간적 및 시간적 분포특성을 가진 이동강우를 해석하기 위하여 분포형 모델을 개발하였으며 이 유역모델은 지표면 흐름과 하천망 흐름으로 나누어 유출을 해석하였다. 지표면의 흐름은 2차원의 연속방정식과 운동량 방정식을 이요하였는데 kinematic 이론을 도입하여 운동량 방정식을 간략화 하였으며 하천망 흐름은 하천망을 일체로 하여 1차원의 연속방정식과 운동량방정식들을 이용하였다. 기본방정식들의 수치해석법으로 지표면의 흐름은 유한요소법을 이용하였으며 하천망에 대한 해석은 음해법의 유한차분법을 이용하였다. 모델은 특히 이동강우에 있어서 중요한 특색인 공간적 및 시간적 특성을 효과적으로 해석할 수 있도록 개발되었다. 또한 모델은 구성된 행렬의 특징을 이용하였는데, 지표면 유출모델은 Gauss 소거법을 이용하여 그해를 구하였으며 하천망 해석은 double sweep 방법을 적용하기 위한 여러 종류의 순환계수방정식을 제안하였고 이를 이용하여 그 해를 구하였다.

• 한국시뮬레이션학회논문지
• /
• 제25권4호
• /
• pp.43-52
• /
• 2016

WSN(Wireless Sensor Network)을 구성하는 노드의 빠른 프로토타이핑을 위해서, 상용 MCU(Microcontroller) 기반의 센서 노드 보다는 하드웨어 재구성이 가능한 FPGA 기반의 구현이 적합하다. 본 논문은 FPGA 기반 센서 노드의 노드와 네트워크 레벨의 다층 분석을 위한 시뮬레이션 환경을 제안하고자 한다. 제안 환경은 FPGA 기반 노드와 네트워크 시뮬레이터인 NS3가 IEEE 연동 표준인 HLA(High-level Architecture) 기반의 연동 미들웨어 RTI에 참여하여 방식을 따른다. 본 환경은 기존의 FPGA 디자인 툴을 server-client 방식으로 설계한 어댑터, FPGA와 연결된 호스트 컴퓨터에서 회로에 신호 입출력이 가능한 디지털 블록, 연동 스크립트를 이용하여 FPGA 에뮬레이션과 연동이 되도록 지원한다. 단독으로 동작하는 NS3 또한 HLA 기반 연동을 위해 수정하였다. FPGA 제안 환경은 에뮬레이션과 이벤트 기반으로 동작하는 NS3 시뮬레이션 간 서로 다른 시간 진행 방식은 문제를 해결하기 위해 pre-simulation 기술을 적용하여 설계하였다. 제안하는 시뮬레이션 환경을 IEEE 802.15.4 저속도 무선 네트워크 통신망 분석에 적용하였다.

• 대한교통학회지
• /
• 제10권2호
• /
• pp.25-42
• /
• 1992

The purpose of this paper is to construct a model to compute a progression adjustment factor on a signalized network. In a way to construct the model, a simulation method is introduced and the TRAF-NETSIM is used as a tool of simulation. The structure of the network chooses an urban arterial network so as to measure the effect of progression and compute average stopped delay on each link. A regression model is constructed by using the results of the simulation. The stepwise variable selection in the regression model in used. The findings of this paper are as follows: i)The secondary queue and platoon ratio are sensitive to the values of the progression adjustment factor ii) The continuous model can practically reflect on various situations in the real world. The platoon adjustment factor can be computed by this model and the data required for this model can be easily obtained in the field.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.73-78
• /
• 2008

A resistor network model for the horizontal AlInGaN LED was investigated, The parameters of the proposed model are extracted from the test dies and $350{\mu}m$ LED, The center of the P-area is the optimal position of a P-electrode by the simulation using the model. Also the optimal chip size of the LED for the new target current was investigated, Comparing the simulation and fabrication result, the errors for the forward voltage and the light power are average 0,02 V, 8 % respectively, So the proposed resistor network model with the linear forward voltage approximation and the exponential light power model are useful in the simulation for the horizontal AlInGaN LED.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.203-207
• /
• 2009

WiBro(Mobile WiMAX) has gained momentum as a top candidate to deliver the dream of full mobile wireless internet. To save cost and time in WiBro network design, simulation tool has to deploy powerful and useful analysis functions. If path loss model is more accurate, the reliability of analysis result of simulation tool will be much improved. So we emphasize on the importance of pathloss model in WiBro network design in this paper. For this, we introduce to three kinds of pathloss models(SUI, SCM, SCM-E) supposed properly models in WiBro RF (Radio Frequency) environment. Also we treat from basic theory to practical substance on the pathloss model to adopt WiBro network design/optimization. Finally, we describe about wireless network analysis tool named 'CellPLAN(R)' and techniques possible to improvethe accuracy of pathloss model.

• ETRI Journal
• /
• 제14권4호
• /
• pp.19-27
• /
• 1992

Since. as is well known, direct computation of the reliability for a large-scaled and complex net work generally requires exponential time, a variety of alternative methods to estimate the network reliability using simulation have been proposed. Monte Carlo sampling is the major approach to estimate the network reliability using simulation. In the paper, a dynamic Monte Carlo sampling method, called conditional minimal cut set (CMCS) algorithm, is suggested. The CMCS algorithm simulates a minimal cut set composed of arcs originated from the (conditional) source node until s-t connectedness is confirmed, then reduces the network on the basis of the states of simulated arcs. We develop the importance sampling estimator and the total hazard estimator and compare the performance of these simulation estimators. It is found that the CMCS algorithm is useful in reducing variance of network reliability estimator.

• 컴퓨터교육학회논문지
• /
• 제4권2호
• /
• pp.13-20
• /
• 2001

현대 사회의 여러 문제들을 극복하기 위해서 민주 시민의 자질을 향상시키는 것은 중요하다. 민주 시민의 자질에는 합리적이고 민주적인 문제 해결력, 의사결정력, 인간의 존엄성, 대화, 그리고 타협과 같은 민주적 태도 및 기능이 포함된다. 시뮬레이션과 게임 그리고 네트웍의 장점을 가진 교육용 네트웍 시뮬레이션 게임을 이용한다면 민주 시민의 자질을 향상 시키는 민주 시민 교육에 도움이 될 것이다. 본 연구는 이러한 민주 시민 교육을 위한 교육용 네트웍 시뮬레이션 게임의 구조와 절차, 시스템, DB, 인터페이스, 교수-학습용 도구 등에 대해 살펴본다.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.125-136
• /
• 1999

In the forthcoming public ATM/B-ISDN, the efficient resource management with pre-planned transit networking which public domain NNI signaling is essential to maintain high network utilization and to assure QoS to the multimedia service users. For this purpose the transit networks must be managed according to the bearer service capability which is defined by ATM Forum and ITU-T. In this paper, we introduce an implementation of ATM transit networking with ATM VP-XC(Virtual Path cross-connect) and US(Network Management System). The functions of ATM VP-XC and NMS have been simulated with OPNET 6.1 modules. We implemented the F4 OAM functions of ATM VP connection according to the ITU-T 1.610 recommendation. Also, the ATM VP transit networking is managed by the NMS according to the connection management architecture of the TWN(Telecommunications Management Network) /TINA ( Telecommunications Information Networking Architecture).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.106-108
• /
• 1997

Many new office buildings are being built as intelligent buildings equipped with building automation(HA) systems, office automation(OA) systems, and telecommunication(TC) systems in order to provide pleasant building environment and the ease of maintenance and facility management. Building control systems which are employed in intelligent buildings require varieties of advanced control systems and network systems for efficient integrated management. Design and installation of these types of advanced building control systems take a lot of efforts and also they are costly. In order to design these systems, it is necessary for the designers to have the integrated simulator including proper network system simulation. In this paper, the integrated simulator that consist of HVAC system, lighting system, elevator system, parking system based on the network system is presented. For the development of integrated simulator, AHENA which is the general-purpose software tool for a simulation with reinforced GUI is used.

• 한국시뮬레이션학회논문지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2003

Recently, various network protocols have been developed to keep step with the rapid growth of Internet users. For the education of students in the computer networks classes, there have been many attempts to allow students experiment routers setting, operations and management of networks by themselves, in addition to the classroom lectures based on textbooks. One of the attempts is to install expensive real router experiment sets in laboratories for students, and one another is using router and network simulators for virtual experiments. This paper presents the design and implementation of NetSim, a scalable, component-based simulator environment for the network experimentation. NetSim expands the existing component-based JavaSim simulation tool for the education purpose, and it allows the design and experiment of various networks and protocols. For the evaluation of NetSim, it is shown that the network design and RIP-based router setting process is possible in NetSim.