• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.89-94
• /
• 2009

In wireless mesh network, nodes are communicates as like as Ad-Hoc. Nodes of Wireless Mesh Network must have a good QoS and a algorithm for good path. ETX, ETT and WCETT are proposed Wireless Mesh Network routing methods. But these have Interference problem. This paper propose ETI(Expected Transmission Interference) based on ETT for good path selection. This paper show the algorithm and improved performance in simulation than other algorithms.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.26-35
• /
• 2020

The national satellite operation network, which supports multiple satellites, was designated as a Critical Information Infrastructure (CII) in 2017. The network was designed independently from the control network and the information network to enhance physical security. Planning is underway to establish a bidirectional data interface between networks. The data transmission system allows data flow only to the physical layer and the data link layer; hence, only one file can be transferred at any one time. This means that when large amounts of data are being transmitted, no other data can be sent simultaneously in urgent situations. Thus, this paper discusses the design of flexible packets for the transmission of data between networks in an environment where physical security has been enhanced through network separation and based on this, presents a method for transmitting data effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.192-201
• /
• 1993

According to technical advances of telecommunication, communication network has changed to digital transmission from analog transmission network. In the long run, current network will be altered into ISDN which makes end-to-end digital communication. This transition of communication network brings about an important questions for networking plan, administration, and speech quality in order to achieve the effective and advanced telecommunication. Speech quality criterions and degradation factors of digital communication system differ from those of existing analog system because of other characteristics like single echo. It is, therefore, necessary to design new criterions and specifications for digital communication network. This Paper describes the relation between speech communication and speech transmission quality and describes the implementation of model system for quality evaluation of digital speech communication network. In addition, some applications of model system implemented are proposed.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.241-260
• /
• 2011

In earlier days, most of the data carried on communication networks was textual data requiring limited bandwidth. With the rise of multimedia and network technologies, the bandwidth requirements of data have increased considerably. If a network link at any time is not able to meet the minimum bandwidth requirement of data, data transmission at that path becomes difficult, which leads to network congestion. This causes delay in data transmission and might also lead to packet drops in the network. The retransmission of these lost packets would aggravate the situation and jam the network. In this paper, we aim at providing a solution to the problem of network congestion in mobile ad hoc networks [1, 2] by designing a protocol that performs routing intelligently and minimizes the delay in data transmission. Our Objective is to move the traffic away from the shortest path obtained by a suitable shortest path calculation algorithm to a less congested path so as to minimize the number of packet drops during data transmission and to avoid unnecessary delay. For this we have proposed a protocol named as Congestion Aware Selection Of Path With Efficient Routing (CASPER). Here, a router runs the shortest path algorithm after pruning those links that violate a given set of constraints. The proposed protocol has been compared with two link state protocols namely, OSPF [3, 4] and OLSR [5, 6, 7, 8].The results achieved show that our protocol performs better in terms of network throughput and transmission delay in case of bulky data transmission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3904-3917
• /
• 2017

IP multimedia subsystem (IMS) is an open standardized architecture for delivering multimedia service over IP network in a route-agnostic manner. With the increasing popularity of conversational class service, the delivery of a traffic flow with a certain bandwidth demand over a single network path is either not possible or not cost-effective. Multipath transmission is considered to be a promising solution to provide high-quality delivery service. This paper proposes a software defined service overlay network (SDSON) based multipath transmission framework for IMS, which is complementary to existing network architecture. The framework transforms original two-party session negotiation into three-party session negotiation that supports participants to negotiate multipath transmission capacity and path information by signaling message. Based on existing IETF standards, SIP and SDP are scalable to support these functions. Finally, the proposed framework is fully implemented on open source platform and examined by experiments. Experimental results show that multipath-enabled IMS is an effective way to improve the delivery performance of conversational class service.

• Journal of the Korea Society for Simulation
• /
• v.18 no.1
• /
• pp.35-40
• /
• 2009

The reliability of processing the distributed application becomes more and more important issues in distributed network as the usage of distributed network increases. Because the distributed network applications are processed in the available resources of Internet. It is important factors that the user can efficiently access the available resources and processed results can be delivered to the user of job request. Therefore in this paper, we suggested the survivability factor for sending data safely whether it can be efficiently accessed between the user and available resource which processes the distributed application. And evaluated the performance of the suggested factor using the data transmission time. Also we suggested the transmission algorithm for safe transmission using the survivability factor.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.67-73
• /
• 2012

In this paper, in order to overcome the disadvantage of wireless-based sensor network, a hybrid sensor network using wired and wireless linkage is proposed. Proposed a wired and wireless linkage hybrid sensor network can compensate the defect of poor transmission at the indoor wireless environment, and can be free from interference between a wireless LAN and Bluetooth of the same frequency bandwidth due to an attribute of low-loss transmission at the CATV network. Also, proposed a wired and wireless linkage hybrid sensor network make use of CATV network which is well-built infrastructure, is more efficient to design network, assure a stability and high reliability of the sensor network as providing a stability for an inaccuracy and a predictable transmission link for the existing wireless network.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.197-203
• /
• 2004

A real-time network in a distributed control system plays an important role for the reliable data transmission. Compared to the field-buses used in the past, TCP/IP protocol on the top of Ethered provides a compatibility between applications as well as an economical method to develop softwares. This paper proposes a modified TCP/IP structure for IEEE-1394 network, with which asynchronous and isochronous data transmission is selectively used for the real-time data transmission in a distributed control system. This paper also shows the performance of the proposed protocol by experiments.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.225-227
• /
• 2006

The transmission network clustering using a fuzzy entropy function are proposed in this paper. We can define a similarity measure through a fuzzy entropy. All node in the transmission network system has its own values indicating the physical characteristics of that system and the similarity measure in this paper is defined through the system-wide characteristic values at each node. However, to tackle the geometric mis-clustering problem, that is, to avoid the clustering of geometrically distant locations with similar measures, the locational informations are properly considered and incorporated in the proposed similarity measure. In this paper, a new regional clustering measure for the transmission network system is proposed and proved. The proposed measure is verified through IEEE 39 bus system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1426-1435
• /
• 1996

In this paper. a network theory for generaltransmission systme was extended considering the direction of power flow. Also, a modified network model was suggested for a node with 4 shafts in order to verify the power flow. Based on the extended network theory, a simulation program was developed to analyze a hydro-mecaanical tranmission(HMT) system consistion of two hydrostatic pump motors, severeal planetary gear trains steer differential gear. The simulation result showed that the extendednotwork analysis program develped can predict the power circulation as well as the magnitude of torque and speed for each transmission element and can be used design tool for genaral power transmission system.