• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.1
• /
• pp.13-21
• /
• 1967

A low pass filter is synthesized with R, C and negative impedance converters(NIC). The filter has a 4-th order elliptic function, which gives best magnitude approximation with equi-ripple characteristics both in pass and stop band. And experimental investigations have been made on the effect of the anticipated deviation of the NIC conversion factor and of possible loaded operation. Through the study, it has been cocluded that: 1. For minimum pole-zero sensitivity with respect to the NIC conversion factor, the network of a parallel RC-NIC configuration is preferable and the Horowitz polynomial decomposition method is applied in the synthesis procedure. 2. A few percentage variation of the NIC conversion factor changes the frequency and amplitude characteristics of the filter by nearly negligible amount. 3. With a load resistance below the critical value, the filter turns into an oscillator.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.4
• /
• pp.19-24
• /
• 1974

An ungrounded inductance, necessary for construction of general type networks, is synthesized using two operational amplifiers and several passive elements. Through indefinite admittance matrix procedure. it is proved that the synthesized network is equivalent to an ungrounded pure inductance with a positive and a negative resistance in the parallel arms. A practical low-pass filter is made according to this synthesis method, and the resultant characteristic has been verified by means of IBM's simulation program ECAP (Electronic Circuit Analysis Program).

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.177-185
• /
• 1996

This paper describes several algorithms for technolgoy mapping of logic functions into interesting and popular FPGAs that use look-up table memories. In order to improved the technology mapping for FPGA, some existing multi-level logic synthesis, decomposition reduction and packing techniques are analyzed and compared. And then new algorithms such as merging fanin, unified reduction and multiple disjoint decomposition which are used for combinational logic design, are proposed. The cost function is used to minimize the number of CLBs and edges of the network. The cost is a linear combination of each weight that is given by user. Finally we compare our new algorithm with previous logic design technique. In an experimental comparison our algorithm requires 10% fewer CLB and nets than SIS-pga.

• International Journal of Advanced Culture Technology
• /
• v.4 no.4
• /
• pp.30-37
• /
• 2016

In this paper, the method of controlling the clock that is inputted on the hardware from the application, and the hardware design method are to be proposed. When the hardware is synthesized to the Field Programmable Gate Array(FPGA), the input clock is fixed, and when the input clock is changed, the synthesis process must be passed again to require more time. To solve this problem, the Mixed-Mode Clock Manager(MMCM) module is mounted to control the MMCM module from the application. The controlled MMCM module controls the input clock of the module. The experiment was process the Neural Network algorithm in the x86 CPU and SIMT based processor mounted the FPGA. The results of the experiment, SIMT-based processors, the time that is processed at a frequency of 50MHz was 77ms, 100MHz was 34ms. There was no additional synthesis time due to a change of the clock frequency.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.428-438
• /
• 2020

The jitter in the digital videos lowers the visibility and degrades the efficiency of image processing and image compressing. In this paper, we propose a video stabilizer architecture based on triplet CNN and a method of synthesizing training datasets based on video synthesis. Compared with a conventional deep-learning video stabilization method, the proposed video stabilizer can reduce wobbling distortion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.294-298
• /
• 1996

This paper presents an attempt to find the physical structure of dynamic systems which achieves the behavior of a given system function. The scheme pursued by te paper would be regarded as synthesizing dynamic systems, and a method to synthesize them analytically is proposed by means of bond graph prototypes. The method proposed adopts several concepts used to synthesize networks in the electrical field, but yet demonstrates its own strengths such as the freedom from the causality assignment and determination of junction types. Also, it is shown that this method has further advantages in reticulating a given specification into feedforward and feedback expansions relative to electrical network synthesis and the method introduced by Redfield. The proposed method is examined through an example to trace the outline of the analytical synthesis of dynamic systems using bond graph prototypes.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.385-388
• /
• 2012

This paper describes the synthesis and characterization of graphene by RTA process. Amorphous 3C-SiC were deposited using APCVD for carbon source and Ni layer were employed for transition layer. Various parameters of the ramping speed, the annealing time and the cooling speed are evaluated for the optimized combination allowed for the reproducible fabrication of graphene using 3C-SiC thin film. For analysis of crystalline Raman spectra was employed. Transferred graphene shows a high IG/ID ratio of 2.73. SEM and TEM images show the optical transparency and 6 carbon network, respectively. Au electrode deposited on the transferred graphene shows linear I-V curve and its resistance is 358 ${\Omega}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.125-130
• /
• 2003

TiO$_2$ nanoparticles were prepared by photochemical synthesis in the dry toluene. The shape and size of the amorphous TiO$_2$ nanoparticles were investigated by transmission electron microscope. The particle size was varied by the contents of the titanium (IV) isopropoxide in dry toluene. Especially networked TiO$_2$ particles were formed from 40% titanium (IV) isopropoxide solution. The optical absorption spectra, photoluminescence, and PL excitation spectra of TiO$_2$ in dry toluene were obtained. The were shifted to the short wavelength as the contents of TiO$_2$ were increased. PL excitation had the peak at the wavelength regions is which the absorption increased steeply.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.82-94
• /
• 2021

In this work, six voiced/unvoiced speech classifiers based on the autocorrelation function (ACF), average magnitude difference function (AMDF), cepstrum, weighted ACF (WACF), zero crossing rate and energy of the signal (ZCR-E), and neural networks (NNs) have been simulated and implemented in real time using the TMS320C6713 DSP starter kit. These speech classifiers have been integrated into a linear-predictive-coding-based speech analysis-synthesis system and their performance has been compared in terms of the percentage of the voiced/unvoiced classification accuracy, speech quality, and computation time. The results of the percentage of the voiced/unvoiced classification accuracy and speech quality show that the NN-based speech classifier performs better than the ACF-, AMDF-, cepstrum-, WACF- and ZCR-E-based speech classifiers for both clean and noisy environments. The computation time results show that the AMDF-based speech classifier is computationally simple, and thus its computation time is less than that of other speech classifiers, while that of the NN-based speech classifier is greater compared with other classifiers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.9-16
• /
• 1972

In this article it is shown that a GIC circuit with conversion "s" can be realized and a inductor is realized as a RC active two terminal network by using it instead of a gyrator. It is also shown that arbitary stable transfer functions can be realized as the open-circuit voltage ratio of 2 port networks which include GIC;s. In relizing the GIC circuit using transistors, it is made clear that the nullatornorator model of atransistor can be successfully applied at least in the frequency range below 10kHz. The synthesis method using GIC's is characterized with the followings; First, arbitrary stable transfer functions are realized systematically by repeating very simple network structure. Second, in the overall network all circuit elements except GICs are only resistors. Third, the number of condensers in the overall network necessary for realizing the transfer function of n-th order are n, which is believed to be the least number expected. expected.