• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.37-41
• /
• 2020

In this paper, we propose a routing method to improve the message transmission efficiency between DTN nodes in an environment where communication infrastructure in the city is destroyed. In the situation where a certain size of communication infrastructure can not function, the message transmission process between the nodes is explained. An effective routing method for improving reliability between nodes was proposed and evaluated using DTN simulator. The routing algorithm with improved reliability in urban areas was confirmed by simulation considering the message transmission relationship between nodes on uncertain path due to the destruction of communication infrastructure. We used a routing algorithm that includes all the contact information the node has experienced in the past. In the simulation of delivering messages in a situation where the communication infrastructure was destroyed, relatively better results were obtained than the existing routing algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.63-70
• /
• 2005

Various schemes for mobility are currently studied in ITU-T, 3GPP, IETF, and so on. Mobility support in NGN for seamless service is necessarily required. Currently proposed mechanisms are MIPv6, $IP^2$, and Q.MMF. However the performance comparison of all existing schemes is not examined as yet. That is, the existing methods need to be compared according to each performance parameter. So, in this paper, we investigate and compare the performances of MIPv6, $IP^2$, Q.MMF to location registration. In addition, this paper presents the performance comparison of handover latency times. For this, we use NS-2 simulator. As a result of analysis, $IP^2$ shown the best performance as it is measured the minimum time and cost. And it has low handover latency time in comparison with other mechanisms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.25-33
• /
• 1998

In this paper, we describe a single-gate MESFET mixer at PCS(Personal Communication Service) frequency band. The PCS frequency band is 1965~2025 MHz in FR and 140 MHz in IF irrespectly. The design of the mixer was executed by microwave simulator, EEsof Libra. The matching network is consisted of rectangular inductor, MIM capacitor and open stub. The ma- nufacture work was accomplished by the micro-pen and wedge-bonder. The mixer showed $6.69\pm0.65$ dB of conversion gain, $-14.9\pm3.5$dB of RF reflection coefficient and 57.83 dB of LO/IF isolation at 10 dBm of LO power when LO frequency is 1855 MHz. When this mixer is used at PCS terminal, IF-amplifier which compensates the conversion loss of diode mixer may be omitted.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.3
• /
• pp.55-70
• /
• 2016

The most critical research issue in MANET environment is on supporting reliable communication between various devices. Various Multi-Hop Routing Protocol studies have proceeded. However, some problems you might have found when you use the existing link state routing technique are that it increases Control Message Overhead and it is unstable when node moves in CR circumstance which has transformation of using channel and MIMC circumstance which uses a number of interfaces. This essay offers a technique which is based on On-Demand Hello and the other technique which used Broadcast Interface of optimization as a solution to decrease Control Message Overhead. Also it proposes Quick Route Restoration technique which is utilized by GPS and MPR Selection technique which consider mobility as a solution of stable communication when node moves. Those offered Routing Protocol and OPNET based simulator result will be expected to be an excellent comparison in related research fields.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.5
• /
• pp.104-112
• /
• 2017

The CRE (Cell Range Expansion) that selects the small cell with more efficient uplink resources has been developed by 3GPP to relieve the problem of the traffic imbalance due to the power differences between macro and small cells in HetNet. In addition, ABS (Almost Blank Subframes) has been proposed to resolve the signal interference problem due to the operation CREs. This paper proposes an effective method to calculate the ABS ratio by considering the proportion of the number of UEs in CRE and macro cell ranges, as well as the number of small cells in a macro cell. The proposed method has been implemented on the LTESim simulator, and compared with previously proposed methods. The experimental results show that the proposed method can improve the throughput and packet loss ratio performances. In particular, it is also shown that CRE bias values affect those performances, and there exist effective CRE bias values to derive the best performances.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.34-43
• /
• 2007

Recently, in addition to the sharp increase of mobile nodes, various kinds of wireless technologies are available for mobile nodes. If IPv6 technology is applied to the network, multi-homing terminals which have several public IP addresses on one interface will be common. Accordingly, there are many research activities on mobility management for multi-interface, multi-homming nodes. In this paper we propose an extended fast handover mechanism for multi-interface MIPv6 environments that uses multi-interface FBU (MFBU) message instead of the existing FBU message. The MFBU message has the "tunnel destination" mobility option that points a specific tunnel destination other than NAR, and "T" flag that indicates the existence of tunnel destination option. The proposed mechanism can improve the TCP performance by mitigating packet reordering during FMIPv6 handover that can cause unnecessary congestion control due to 3 duplicate ACKs. In this paper, we implemented a multi-Interface MIPv6 simulator by extending a single-interface MIPv6 simulator in NS-2, and showed that the performance of TCP traffic is improved by using the proposed multi-interface fast MIPv6.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.245-256
• /
• 2009

Pastry overlay network is one of structured P2Ps using DHT(Distributed Hash Table). To reduce the number of messages among nodes, Rosary and LAR have been proposed by exploiting spatial locality and caching, respectively, in the Pastry. Rosary consists of Inter-Pastry and Intra-Pastry. A root node is assigned as a representative in each Intra-Pastry and it has the responsibility of Inter-Pastry and Intra-Pastry routing. Therefore, Rosary has several disadvantages; 1) low fault tolerance in case of root node failure 2) routing hop count increases because of the use of root nodes compared to the existing structured P2Ps, and 3) the communication load is concentrated in some specific areas. LAR has inefficient problems in that caching is not distributed among nodes in Intra-Pastry and caching is used by only nodes in the Intra-Pastry. In this paper, we propose an improved Pastry called Doughnut to overcome the above problems of Rosary and LAR. By dividing nodes with the local characteristics, the Doughnut consists of Inter-Pastry and Intra-Pastry, and all nodes have the responsibility of Inter-Pastry and Intra-Pastry routing. This results in that all nodes perform the role of the existing root node. This solves the problems of the reducing of fault-tolerance, the increasing of routing hop count, and the not-distributed communication load. Also Doughnut can use cache effectively because it guarantees the even cache distribution in local(Intra-Pastry) and the cache contents in local can be used in the other local. The proposed algorithm is implemented using simulator and the experimental results show the effectiveness of the proposed method compared to the existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.965-973
• /
• 2016

As increase of IoT services in wireless communications, the performance evaluation is required to connects massive number of devices in LTE-A system. Existing performance analysis of 3GPP TR 37.868 is shown the limited results up to the number of devices only 30,000 in a cell. So, it is required the performance analysis according to various parameter values in the greater number of devices environment. In this paper, to evaluate the performance, we developed the new modules to simulate LTE-A random access procedures because of a limit that accommodate massive number of devices in existing LTE module. The simulator was developed by OPNET and it can support up to 100,000 devices per cell. This paper also represents the performance analysis results according to the number of preambles, the maximum number of preamble transmissions, backoff indicator and msg2 window size in the same environment with 3GPP TR 37.868. This results are expected to be utilized such as the transition to 5G network and standardization activities.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.285-298
• /
• 2009

According to the development of ubiquitous technologies, sensor networks is used in various area. In particular, medical field is one of the significant application areas using sensor networks, and recently it has come to be more important according to standardization of the body sensor networks technology. There are special characteristics of their own for medical sensor networks, which are different from the one of sensor networks for general application or environment. In this paper, we propose a hierarchical medical sensor networks structure considering own properties of medical applications, and also introduce transmission mechanism based on hierarchical structure. Our mechanism uses the priority and threshold value for medical sensor nodes considering patient's needs and health condition. Through this way Cluster head can transmit emergency data to the Base station rapidly. We also present the new key establishment mechanism based on key management mechanism which is proposed by L. Eschenauer and V. Gligor for our proposed structure and transmission mechanism. We use key provisioning for emergency nodes that have high priority based on patients' health condition. This mechanism guarantees the emergency nodes to establish the key and transmit the urgent message to the new cluster head more rapidly through preparing key establishment with key provisioning. We analyze the efficiency of our mechanism through comparing the amount of traffic and energy consumption with analysis and simulation with QualNet simulator. We also implemented our key management mechanism on TmoteSKY sensor board using TinyOS 2.0 and through this experiments we proved that the new mechanism could be actually utilized in network design.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.144-150
• /
• 2008

This paper describes the design of a coplanar-stripline(CPS) antenna without via hole in microstrip patch type for 910MHz RFID tags using the HFSS simulator. In order to obtain the simplified fabrication design of the antenna, we have used only an impedance matching network to match the impedance of a RFID-tag chip to that of the antenna, not using bandpass filter(BPF). In advance of the optimized antenna design, we have obtained and shown a good agreement compared with the published antenna for 5.8GHz in order to verify the simulation parameters in the HFSS. Based on the verified simulation parameters in the HFSS, we have designed and optimized the 910MHz-CPS-type microstrip patch antenna. The designed simulation results of the antenna show that the proposed antenna is very proper for RFID tags with the 910MHz center frequency without via hole in the microstrip patch antenna.