• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.742-754
• /
• 2020

Zircaloy cladding oxidation is an important phenomenon for both design basis accident and severe accidents, because it results in cladding embrittlement and rapid fuel temperature escalation. For this reason during the last decade, many experts have been conducting experiments to identify the oxidation phenomena that occur under design basis accidents and to develop mathematical analysis models. However, since the study of design extension conditions (DEC) is relatively insufficient, it is essential to develop and validate a physical and mathematical model simulating the oxidation of the cladding material at high temperatures. In this study, the QUENCH-05 and -06 experiments were utilized to develop the best-fitted oxidation model and to validate the SPACE code modified with it under the design extension condition. It is found out that the cladding temperature and oxidation thickness predicted by the Cathcart-Pawel oxidation model at low temperature (T < 1853 K) and Urbanic-Heidrick at high temperature (T > 1853 K) were in excellent agreement with the data of the QUENCH experiments. For 'LOCA without SI' (Safety Injection) accidents, which should be considered in design extension conditions, it has been performed the evaluation of the operator action time to prevent core melting for the APR1400 plant using the modified SPACE. For the 'LBLOCA without SI' and 'SBLOCA without SI' accidents, it has been performed that sensitivity analysis for the operator action time in terms of the number of SIT (Safety Injection Tank), the recovery number of the SIP (Safety Injection Pump), and the break sizes for the SBLOCA. Also, with the extended acceptance criteria, it has been evaluated the available operator action time margin and the power margin. It is confirmed that the power can be enabled to uprate about 12% through best-estimate calculations.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.807-816
• /
• 2012

The Three Mile Island Unit 2 (TMI-2) accident has been studied extensively, as part of both post-accident technical assessment and follow-up computer code calculations. The models used in computer codes for severe accidents have improved significantly over the years due to better understanding. It was decided to reanalyze the severe accident scenario using current state of the art codes and methodologies. This reanalysis was adopted as a part of the joint standard problem exercise for the Atomic Energy Regulatory Board (AERB) - United States Regulatory Commission (USNRC) bilateral safety meet. The accident scenario was divided into four phases for analysis viz., Phase 1 covers from the accident initiation to the shutdown of the last Reactor Coolant Pumps (RCPs) (0 to 100 min), Phase 2 covers initial fuel heat up and core degradation (100 to 174 min), Phase 3 is the period of recovery of the core water level by operating the reactor coolant pump, and the core reheat that followed (174 to 200 min) and Phase 4 covers refilling of the core by high pressure injection (200 to 300 min). The base case analysis was carried out for all four phases. The majority of the predicted parameters are in good agreement with the observed data. However, some parameters have significant deviations compared to the observed data. These discrepancies have arisen from uncertainties in boundary conditions, such as makeup flow, flow during the RCP 2B transient (Phase 3), models used in the code, the adopted nodalisation schemes, etc. In view of this, uncertainty and sensitivity analyses are carried out using simulation based techniques. The paper deals with uncertainty and sensitivity analyses carried out for the first three phases of the accident scenario.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.3
• /
• pp.257-262
• /
• 1981

Field experiment with 0, 100, 200, 400, and 800 kg-N/ha-year application levels was carried out to study the nitrogen response in the early stage of orchardgrass pasture establishment at College Fann, SNU, in 1979 and 1980. Both the highest dry matter yield and maximum percent of N recovery were obtained at the same level of 200 kg-N/ha in the year of seeding. but those of the next year were obtained at 400 kg-N/ha level. Leaf area indices (LAI) and net assimilation rates (NAR) during each regrowth periods as well as total nitrogen contents of forage at each cutting time increased with applied N in both years. The maximum crop growth rate (CGR) over two years was estimated to be obtained when LAI reached to about 5. The accumulation of NO_3 -N in forage started from 400kgㆍN/ha application in 1980. and exceeded the safe level for ruminants at the level of 800 kg-N/ha.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.548-558
• /
• 2014

Load distribution is vital to the performance of multipath transport. The task becomes more challenging in real-time multimedia applications (RTMA), which impose stringent delay requirements. Two key issues to be addressed are: 1) How to minimize end-to-end delay and 2) how to alleviate packet reordering that incurs additional recovery time at the receiver. In this paper, we propose sub-packet based multipath load distribution (SPMLD), a new model that splits traffic at the granularity of sub-packet. Our SPMLD model aims to minimize total packet delay by effectively aggregating multiple parallel paths as a single virtual path. First, we formulate the packet splitting over multiple paths as a constrained optimization problem and derive its solution based on progressive approximation method. Second, in the solution, we analyze queuing delay by introducing D/M/1 model and obtain the expression of dynamic packet splitting ratio for each path. Third, in order to describe SPMLD's scheduling policy, we propose two distributed algorithms respectively implemented in the source and destination nodes. We evaluate the performance of SPMLD through extensive simulations in QualNet using real-time H.264 video streaming. Experimental results demonstrate that: SPMLD outperforms previous flow and packet based load distribution models in terms of video peak signal-to-noise ratio, total packet delay, end-to-end delay, and risk of packet reordering. Besides, SPMLD's extra overhead is tiny compared to the input video streaming.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.4
• /
• pp.75-86
• /
• 2018

This research was thereby made to study and analysis ecological, landscape, and stability qualities of roadside cut Slopes in expressways and national highways that went through revegetation works. Also, evaluation items and framework for integrated assessment of plant structure and restored state for the maintenance were suggested. Following is the summary of the result. firstly, for stabilization of introduced native plant species on roadside cut slops, assessment on the post-project environmental management through long-term monitoring and maintenance works must be made. It signifies a form of authentic recovery and restoration by the native plants. second, current evaluation framework on the test beds is well managed with clear evaluation standards and table while its method of assessing the post management with only test bed results lacks conformity with this study site. Newly developed evaluation framework on the post construction sites is estimated to be used as assessment standards on any roadside construction sites. Third, after site investigation distinction was observed among different revegetating construction types in the long-term perspective. Due to the different duration time of vegetation state between seed-spray measures(degraded in time) and layer-spray measure(maintained), the use of coarse straw-mat mulching work or Coir net was suggested in long term maintenance of cut slopes. forth, segmentation of post environmental assessment is organized into three large categories of "ecological", "stabile", and "landscape" qualities regarding post restoration quality and stability of slope through native plants with which categories marks 50, 30, 20 points of rates. fifth, components of the post environmental assessment were segmented in twelve categories driving results from former experimental construction and newly focused items on site. In the future, it is possible to propose a customized assessment method considering the location and location of construction work if the research on the application of post-environment assessment methods for road construction surface recording is conducted systematically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.66-71
• /
• 1982

Field experiments of nitrogen application (0, 100, 200, 400, 800kg N/ha year) were carried out to study the nitrogen response of Sudangrass at College Farm, Seoul National Univ., in 1979 and 1980. Dry matter yield and leaf area index increased up to 400kg N/ha in 1979 and 800kg N/ha in 1980. The forage yield of 1980 was less than that of 1979, due to the extraordinarily low temperature and the decreased solar radiation during summer. Total nitrogen contents in forage increased with nitrogen application, but maximum contents were found either 400 or 800kg N levels depend on each cutting stages. Nitrate nitrogen content in forage exceded over 2000 ppm at 800kg N application. Overall percentages of N recovery were below 50% with average 34%. Net assimilation rate and nitrogen use efficiency of Sudangrass were improved in higher temperature and more sunlight condition during regrowth period.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1711-1716
• /
• 2017

Uranium tetrafluoride ($UF_4$) is the most used nuclear material for producing metallic uranium by reduction with Ca or Mg. Metallic uranium is a raw material for the manufacture of uranium silicide, $U_3Si_2$, which is the most suitable uranium compound for use as nuclear fuel for research reactors. By contrast, ammonium uranyl carbonate is a traditional uranium compound used for manufacturing uranium dioxide $UO_2$ fuel for nuclear power reactors or $U_3O_8-Al$ dispersion fuel for nuclear research reactors. This work describes a procedure for recovering uranium and ammonium fluoride ($NH_4F$) from a liquid residue generated during the production routine of ammonium uranyl carbonate, ending with $UF_4$ as a final product. The residue, consisting of a solution containing high concentrations of ammonium ($NH_4^+$), fluoride ($F^-$), and carbonate ($CO_3^{2-}$), has significant concentrations of uranium as $UO_2^{2+}$. From this residue, the proposed procedure consists of precipitating ammonium peroxide fluorouranate (APOFU) and $NH_4F$, while recovering the major part of uranium. Further, the remaining solution is concentrated by heating, and ammonium bifluoride ($NH_4HF_2$) is precipitated. As a final step, $NH_4HF_2$ is added to $UO_2$, inducing fluoridation and decomposition, resulting in $UF_4$ with adequate properties for metallic uranium manufacture.

• The Magazine of the IEIE
• /
• v.22 no.8
• /
• pp.33-43
• /
• 1995

생산시스템 분야에서의 다중로봇시스템에 대한 필요성이 증가되고 있기 때문에, 이에 대한 시스템 성능분석이 우선적으로 필요하다. 본 논문에서는 다중로봇시스템의 성능평가를 위한 컴퓨터 시뮬레이션 방법을 제시한다. 먼저 오류회복 기능만을 고려한 다중로봇시스템에 대하여 여러 가지의 모델링 방법 중에서 확장 페트리 네트 모델을 기초로 하여 컴퓨터 시뮬레이션 하는 과정을 제시하고 제시된 시뮬레이션 방법의 유효성을 입증하기 위하여 부가적으로 큐잉모델을 기초로 한 해석적 수식을 유도하여 두 가지의 결과를 비교해 본다. 그 다음, 오류회복 기능에 덧붙여서 충돌회피 기능을 고려한 다중로봇시스템은 해석적 수식을 유도하기 위해서는 강력한 가정들이 필요하며 이러한 가정들 때문에 실제 시스템을 정확히 모델에 반영하기 어려워진다. 따라서, 그 유효성이 입증된 컴퓨터 시뮬레이션을 이용하면 필요한 최적의 운용 변수를 용이하게 선택할 수 있을 것이다. Since there are Increasing demands for multirobot interconnection systems(MRIS) in Industrial manufacturing system, the performance evaluation of the MRIS is first needed. This thesis presents a computer simulation technique for the performance evaluation of the MRIS. First, we consider a error recoverable MRIS. We adopt the extended Petri net model as a computer simulation model that allows an easy evaluation of the performance. To verify the significance of the proposed computer simulation method, mathematical analysis, which is based on the given queueing model, is carried out with some design issues for the MRIS. In addition to this, it is required to analyze the MRIS considering collision avoidance as well as error recovery. In this case, methematial analysis needs hard assumptions which are the constraints for the precise description of real environment. Thus, we present a computer simulation model and its results suggest an optimal operational strategy for the MRIS under given conditions.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.16-25
• /
• 2016

In severe loss of coolant accidents (LOCA), similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconiumalloy fuel claddingmaterials are rapidlyheateddue to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident management, an accident tolerant fuel (ATF) design may extend coping and recovery time for operators to restore emergency power, and cooling, and achieve safe shutdown. An ATF is required to possess high resistance to steam oxidation to reduce hydrogen generation and sufficient mechanical strength to maintain fuel rod integrity and core coolability. The initiative undertaken by Electric Power Research Institute (EPRI) is to demonstrate the feasibility of developing an ATF cladding with capability to maintain its integrity in $1,200-1,500^{\circ}C$ steam for at least 24 hours. This ATF cladding utilizes thin-walled Mo-alloys coated with oxidation-resistant surface layers. The basic design consists of a thin-walled Mo alloy structural tube with a metallurgically bonded, oxidation-resistant outer layer. Two options are being investigated: a commercially available iron, chromium, and aluminum alloy with excellent high temperature oxidation resistance, and a Zr alloy with demonstratedcorrosionresistance.Asthese composite claddings will incorporate either no Zr, or thin Zr outer layers, hydrogen generation under severe LOCA conditions will be greatly reduced. Key technical challenges and uncertainties specific to Moalloy fuel cladding include: economic core design, industrial scale fabricability, radiation embrittlement, and corrosion and oxidation resistance during normal operation, transients, and severe accidents. Progress in each aspect has been made and key results are discussed in this document. In addition to assisting plants in meeting Light Water Reactor (LWR) challenges, accident-tolerant Mo-based cladding technologies are expected to be applicable for use in high-temperature helium and molten salt reactor designs, as well as nonnuclear high temperature applications.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.24 no.1
• /
• pp.109-131
• /
• 2011

Objectives: This study aims to search the clinical cases that treated leiomyoma through the traditional Chinese medicine, to understand the study trend on leiomyoma in China, and to clairfy the cause of leiomyoma and its treatment by the oriental medicine herbs. Methods: We searched the key word "leiomyoma" in the China National Knowledge Infrastructure (CNKI)[http://www.cnki.net], and narrowed its searching area to the papers published in the year 2010. Of 720 study papers, we chose 21 clinical papers on the leiomyoma, and studied the patient case, treating method, result of treatment, and checked the category, cause, treatment method of leiomyoma. Results: The results are shown in the Table 1-3. Conclusions: Leiomyoma is categorized in the traditional Chinese medicine as both lump occuring inside the body and stony abdominal lump. The main cause of leiomyoma is qi-stagnation and blood stasis, essence deficiency and pathogen affluence. The treatment method is used by activating blood and resolving stasis but harmonizing the spleen and stomach to prevent damaging healthy qi. The development herbal medicine of treating leiomyoma is Gyehongbyeolgaphwan, Gyejibongnyeonggyonang, Gungryusogyonang, Angonpyoen etc. In treating leiomyoma, the herbs were much used to regulate qi as Baekbokryung, Danggwi, Baekchul, Doin, Moryeo, Achul, Mokdanpi etc. Traditional Chinese Medicine(TCM) treatment of leiomyoma has efficiency of improve symptom but low ratio of complete recovery.