• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.917-926
• /
• 1999

본 논문에서는 운방전에 의해서 방사되는 자장 파형을 측정할 수 있는 루프형 자장 센서를 이용한 계측장 치를 제작하고, 뇌방전과 관측점 사이의 거리측정계를 제안하였다. 정극성과 부극성의 자장 파형에 대한 중첩 펄스의 시간 간격, 영점 교차시간과 백분율 반전답의 깊이 등의 파라미터를 뇌방전 지점과 관측 지점 사이의 거리에 따라 통계적으로 분석하였으며, 그 결과를 요약하면 다음과 같다 운방전에 의해서 발생한 자장 파형 의 파두 부분에는 수 개의 중첩 펄스가 관측되었으며, 이들 펄스 사이의 평균 시간 간격은 약 $4\mu\textrm{s}$이었다. 또 한, 양극성 특성이 명확하게 나타났으며, 백분율 반전답의 깊이는 약 57 -65 %이었다. 뇌방전 지점에서 관측 지점 사이의 거리가 증가할수록 영점 교차시간은 짧아졌다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.120-126
• /
• 2001

For the past five years, Inha University has been observing the electric fields produced by cloud-to-ground return strokes. This paper presents the summary of most recent results. Statistics on the zero-to-peak rise time, the zero-to-zero crossing time and the amplitude ratio of the second peak in the opposite polarity to the first peak were examined. The radiation electric fields produced by distant cloud-to-ground return strokes were substantially same pattern. The first return stroke field starts with a slowly increasing front and rises abruptly to peak. The rising portions of the electric fields produced by cloud-to-ground return strokes last 1 $mutextrm{s}$ to a few $mutextrm{s}$. The mean values of the zero-to-peak rise times of electric fields were 5.72 $mutextrm{s}$ and 4.12 $mutextrm{s}$ for the positive and the negative cloud-to-ground return strokes, respectively. The mean of the zero-to-zero crossing time for the positive return strokes was 29.48 $mutextrm{s}$ compared with 38.54 $mutextrm{s}$ for the negative return strokes. The depths of the dip after the peak of return stroke electric fields also have the dependence on the polarity of cloud-to-ground return stroke, and the mean values for the positive and negative cloud-to-ground return strokes were 33.55 and 28.19%, respectively.

• 자원환경지질
• /
• 제56권4호
• /
• pp.365-384
• /
• 2023

서태평양에 위치한 총 173개의 지진 관측소에서 획득한 2,026개의 지진 자료에 분할 파형 역산을 적용하여 서태평양 지역 맨틀 전이대 깊이까지 S파 등방성 속도 및 방사 이방성에 대한 연구를 수행했다. 그 결과 필리핀해판의 경우 페러스-벨라 분지(Parece-Vela basin)에서 고속도 이상이 30 km 깊이까지 나타나는 것에 비해 서필리핀 분지(West Philippine basin)에서 고속도 이상이 50 km 깊이까지 유지되었다. 페러스-벨라 분지 하부 약 80 km 깊이부터 나타나는 저속도 이상이 깊이가 깊어짐에 따라 서필리핀 분지로 확장되는 경향을 보였는데 이는 페러스-벨라 분지와 서필리핀 분지 사이의 연령차이에 의한 것으로 보인다. 또한 캐롤라인 해저 산열(Caroline seamount chain) 및 캐롤라인 판의 하부에서 강한 저속도 이상이 약 200 km 깊이까지 보인다. 방사 이방성 모델의 경우 서태평양에서 전반적으로 양의 이방성에 우세하게 나타났으며 페러스-벨라 분지에서 약 50 km 깊이까지, 마리아나 해구를 따라 섭입하는 태평양판의 약 220 km 깊이부터 음의 이방성이 관측되었다. 캐롤라인 해저산열 하부 약 200 km 깊이까지 강한 양의 이방성이 나타났는데 이는 해저산열을 형성한 플룸과 이동하는 태평양판 사이에 발생한 끌림(drag)에 의한 것으로 보인다. 온통-자바 해대(Ontong-Java plateau) 지역 하부에서는 40 ~ 180 km 깊이에서 고속도 이상이 발견되었으며, 이는 탈수된 플룸 물질의 부착으로 인한 비정상적으로 두꺼운 암석권의 존재를 나타낸다.

• 조명전기설비학회논문지
• /
• 제25권3호
• /
• pp.24-32
• /
• 2011

[ $SF_6$ ]gas, which has an excellent dielectric strength and interruption performance, is used in various applications such as gas insulated switchgear (GIS) in substations. However, since $SF_6$ has a high global warming potential (GWP), it is necessary to find an eco-friendly alternative insulation gas. In order to examine the possibility of using alternative insulation gases for $SF_6$ in power distribution system equipment, the dielectric strength and physical phenomena of dry air in a quasi-uniform electric field are investigated experimentally in this paper. As a result, the breakdown voltages for positive polarity are higher than those for negative polarity under impulse voltage applications. The negative 50[%] flashover voltage, $V_{50}$ of dry air under conditions above 0.4[MPa] gas pressure, is higher than 150[kV], that is the basic impulse insulation level of distribution equipment. The $V_{50}$ increases linearly with increasing the gas pressure, regardless of the waveform and polarity of the applied impulse voltages. The voltage-time curves are dependent on the rise time of the impulse voltage and gas pressure. Furthermore, streamer discharge was observed through light emission images by an ICCD camera under impulse voltage applications.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1597-1604
• /
• 2016

The speed at which the SRM (Switched Reluctance Motor) makes a transition from chopping control to single pulse operation. (i.e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on energy efficient C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.370-373
• /
• 1997

We are exposed to the various external stimuli input from the environment, which cause emotional changes based on the characteristics of the stimuli. Unfortunately there are no quantitative results on relationship between human sensibility and the characteristics of physiological signals. The objective of this study was to quantify EEG signals evoked by auditory stimulation based on the assumption that the analysis of the variability on the characteristics of the EEG waveform may provide the significant information regarding changes in psychological states of the subject. The experiment was devised with seven experimental conditions, which are control and six different types of auditory stimulation. Six subjects were used to obtain EEGs while introducing auditory stimulation. Wavelet transformation was employed to analyze the EEG signals. The results showed that the reconstructed signals at the decomposition level revealed the different energy value on the EEG signal. Also, general patterns of EEG signals in rest state compare with negative and positive stimulus were found. This study could be extended to establish an algorithm which distinguishes psychophysiological states of the subjects exposed to the auditory stimulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.28-32
• /
• 2004

In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on conventional C-dump converter topology and the proposed resonant C-dump converter topology Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.57-63
• /
• 2003

Since new types of vehicles or structures made from thin aluminum alloy are under rapid development and some products are already on the market, welding of aluminium sheet is increasing. MIG(Metal Inert Gas), MIG-Pulse, TIG(Tungsten Inert Gas) welding are the typical Ai welding. MIG welding has the advantage of high speed, but it is difficult to apply to the thin plate, because of bum-through by the high heat input and spatter. MIG-Pulse welding can weld without spatter and burn-through, but when the gap exists at the welding joint, there is quite a possibility of bum-through. TIG welding is difficult to weld at a high speed. AC Pulse welding alternates between DCEP(Direct Current Electrode Positive) and DCEN(Direct Current Electrode Negative). DCEN is higher wire melting rate than DCEP, while lower temperature of droplet than DCEP. In AC Pulse welding, far fixed welding current, wire melting rate increases as the EN ratio increases. For fixed wire feed rate, welding current decreases as the EN ratio increases. Because of these features, the temperature of droplet, the depth of penetration, the width of bead decrease and the reinforcement height increases as EN ratio increases, and these are able to weld at a high speed, lower heat input. It is the purpose of this study that design of AC pulse current waveform for MIG welding of Al sheet and estimation of output characteristic.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.72-78
• /
• 2008

The speed variation of SRM is fulfilled throughout a transition from chopping control to single pulse operation. (i,e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on conventional C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.2079-2082
• /
• 2007

Photonic crystals containing rugate structure result in a mirror with high reflectivity in a specific narrow spectral region and are prepared by applying a computer-generated pseudo-sinusoidal current waveform. Well defined 1-dimentional photonic polymer replicas showing a reflectivity at 534 nm have been successfully obtained by the removal of rugate porous silicon (PSi) template from the polystyrene composite film. XRD measurement indicates that the oxidized rugate PSi has been completely removed from the composite films. Polymer replicas exhibit a sharp resonance in the reflectivity spectrum. Optical characteristics of photonic polymer replicas indicate that the surface of polymer film has a negative structure of rugate PSi. These replicas are stable in aqueous solutions for several days without any degradation. The methods have been provided for the construction of photonic structures with polymers.