• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.224.1-224.1
• /
• 2009

• Journal of Electrical Engineering and Technology
• /
• v.1 no.3
• /
• pp.366-370
• /
• 2006

We investigated the negative differential resistance (NDR) property of self-assembled 4,4-di(ethynylphenyl)-2'-nitro-l-(thioacetyl)benzene ('nitro-benzene'), which has been well known as a conducting molecule [1], Self-assembly monolayers (SAMs) were prepared on Au (111), which had been thermally deposited onto pre-treated $(H_2SO_4: H_2O_2=3:1)$ Si, The Au substrate was exposed to a 1mM solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing of the sample, it was exposed to a $0.1{\mu}M$ solution of nitro-benzene in dimethylformamide (DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. Following the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured the electrical properties of SAMs using ultra high vacuum scanning tunneling microscopy (UHV-STM) and scanning tunneling spectroscopy (STS) [2]. As a result, we confirmed the properties of NDR in between the positive and negative region.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.622-627
• /
• 2005

In this study, electrical properties of self-assembled dipyridinium dithioacetate molecule onto the Au(111) substrate is observed using Scanning Tunneling Microscopy(STM) by vortical structure of STM probe. At first, the Au(111) substrate is cleaned by piranha solution$(H_2SO_4:H_2O_2\;=\;3:1)$. Subsequently, 1 mM/ml of dipyridinium dithioacetate molecule is self-assembled onto the Au(111) surface. Using STM, the images of dipyridinium dithioacetate molecule which is self-assembled onto the Au(111) substrate, can be observed. In addition, the electrical properties(I-V) of dipyridinium dithioacetate can also be examined by using Scanning Tunneling Spectroscopy(STS). From the results of the measurement of the current-voltage(I-V), the property of Negative Differential Resistance(NDR) that shows the decreases of current according to the increases of voltage is observed. We found the NDR voltage of the dipyridinium dithioacetate is -1.42 V(negative region) and 1.30 V(positive region), respectively.

• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.531-538
• /
• 2005

In the high performance Analog Information Processing Systems(AIPS), gain boosting or additional gain stage is required when the gain is not sufficient with one stage amplification. This work shows that high gain is neatly obtained by enhancing the gain using the negative resistance element. Compared to the conventional techniques, the proposed scheme enjoys full output swing, small circuit area and power consumption, and the applications to various configurations of amplifiers. The negative resistance element is placed between the differential output nodes when used in the Op-Amp. The HSPICE simulation indicates that enhancement of more than 40 dB is readily obtained in this simple configuration when the negative resistance element is implemented in the form of cross-coupled CMOS inverters.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.27-31
• /
• 2004

Models and simulations of gate tunneling current for thinoxide MOSFETs and Double-Gate SOIs are discussed. A guideline in design of leaky MOS capacitors is proposed and resonant gate tunneling current in DG SOI simulated based on quantum-mechanicalmodels. Gate tunneling current in fully-depleted, double-gate SOI MOSFETs is characterized based on quantum-mechanical principles. The simulated $I_G-V_G$ of double-gate SOI has negative differential resistance like that of the resonant tunnel diodes.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.34-40
• /
• 2021

For developing a switching device of a new concept that cannot be implemented with a semiconductor device, we introduce the Mott insulator-metal transition (IMT) phenomenon occurring out of the semiconductor regime, such as the temperature-driven IMT, the electric-field or voltage-driven IMT, the negative differential resistance (NDR)-IMT switching generated at constant current, and the NDR-based IMT-oscillation. Moreover, the possibilities of new concept IMT switching devices are briefly explained.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.212-214
• /
• 2004

In this study, we fabricated the organic thin film by self-assembly method by using nitro-group and methoxy-group organic molecule. Also, we selected the organic single molecule in organic thin film and measured current-voltage characteristics by using scanning tunneling microscopy. The Organic molecules that use in an experiment is 4,4'-(diethynylphenyl)-2'-nitro-1-benzen ethiol and 4-[2,5-dimethoxy-4-ph enylethynylphenyl]ethynylphenylethanthiol. 4,4'-(dimet hynylphenyl)-2'-nitro-1-benzenethiol is applied widely in molecular electronic device and 4-[2,5-dime thoxy-4-phenylethynylphenyl]ethynylphenylethanthiol composed in Korea Research Institute of Chemical Technology. To be confirmed the formation of the self-assembled monolayers, we observed the real time frequency shift of the QCM and investigated surface of the self-assembled monolayers the using STM. With this, we measured current to the organic single molecule, in condition of the air state. As a result, we confirmed in constant voltage that properties of negative differential resistance. Using properties of negative differential resistance to get from this study, application is expected to be molecular switching device, memory device and logic device.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1572-1574
• /
• 2002

In this paper, we discuss the electrical properties of self-assembled (2'-amino-4,4-di(ethynylp henyl)-5'-nitro-1-(thioacetyl)benzene), which has been well known as a conducting molecule having possible application to molecular level NDR device. The phenomenon of negative differential resi(NDR) is characterized by decreasing current th a junction at increasing voltage, also fabricatio MIM-type molecular electronic device and the Molecular Level Using Scanning Tunneling Microscopy.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.162-168
• /
• 2011

In this paper, we propose a new Verilog-A current-voltage model for multi-level-cell PCRAMs. This model can describe the PCRAM operation not only in full SET and RESET states but also in the partial resistance states. And, 3 PCRAM operating regions of SET-RESET, Negative Differential Resistance, and strong-ON are unified into one equation in this model thereby any discontinuity that may introduce a convergence problem cannot be found in the new PCRAM model. The percentage error between the measured data and this model is as small as 7.4% on average compared to 60.1% of the previous piecewise model. The parameter extraction which is embedded in the Verilog-A code can be done automatically.