• Title/Summary/Keyword: Near-Field Analysis

Search Result 1,003, Processing Time 0.034 seconds

Analysis of Photovoltaic Performance Improvement of Cu2Zn1-xCdxSn(SxSe1-x)4 Thin Film Solar Cells by Controlling Cd2+ Element Alloying Time Using CBD Method (CBD 공법을 이용하여 Cd2+ 원소 Alloying 시간을 조절한 Cu2Zn1-xCdxSn(SxSe1-x)4 박막 태양전지의 광전지 성능 향상 분석)

  • Sang Woo, Park;Suyoung, Jang;Jun Sung, Jang;Jin Hyeok, Kim
    • Korean Journal of Materials Research
    • /
    • v.32 no.11
    • /
    • pp.481-488
    • /
    • 2022
  • The Cu2ZnSn(SxSe1-x)4 (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se2 (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn2+ element with a Cd2+element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd2+ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (Jsc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd2+ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd2+ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd2+ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, Jsc of 34.0 mA/cm2, and fill factor (FF) of 62.7 %, respectively.

Development of Three-dimensional Inversion Algorithm of Complex Resistivity Method (복소 전기비저항 3차원 역산 알고리듬 개발)

  • Son, Jeong-Sul;Shin, Seungwook;Park, Sam-Gyu
    • Geophysics and Geophysical Exploration
    • /
    • v.24 no.4
    • /
    • pp.180-193
    • /
    • 2021
  • The complex resistivity method is an exploration technique that can obtain various characteristic information of underground media by measuring resistivity and phase in the frequency domain, and its utilization has recently increased. In this paper, a three-dimensional inversion algorithm for the CR data was developed to increase the utilization of this method. The Poisson equation, which can be applied when the electromagnetic coupling effect is ignored, was applied to the modeling, and the inversion algorithm was developed by modifying the existing algorithm by adopting comlex variables. In order to increase the stability of the inversion, a technique was introduced to automatically adjust the Lagrangian multiplier according to the ratio of the error vector and the model update vector. Furthermore, to compensate for the loss of data due to noisy phase data, a two-step inversion method that conducts inversion iterations using only resistivity data in the beginning and both of resistivity and phase data in the second half was developed. As a result of the experiment for the synthetic data, stable inversion results were obtained, and the validity to real data was also confirmed by applying the developed 3D inversion algorithm to the analysis of field data acquired near a hydrothermal mine.

A Study of Color Scheme on Coastal Passenger Ship Seafarer's Workspace (연안여객선 선원의 작업공간 색채계획에 관한 연구)

  • Jin Park
    • Journal of Navigation and Port Research
    • /
    • v.48 no.3
    • /
    • pp.221-231
    • /
    • 2024
  • The aim of this study was to enhance the safety and care of mental health for seafarer working in passenger ship workspaces. Brightness, color values, and color distribution were investigated with issues and improvement ways identified through seafarers' interviews. Firstly, previous studies, references, current policy, regulations, and accident case studies were reviewed. Color compositions of wheelhouse and engine room of M Ship were then surveyed in the field. Color values of each space were analyzed using a colorimeter. Colormeter analysis of brightness and color measurements in the wheelhouse and engine areas indicated that ceilings, walls, and floors were generally dark, with the engine area being very dark. Regarding color, green and blue were distributed in the ceiling of the wheelhouse and engine area, while red and blue were in the walls and floors of the wheelhouse and engine area. According to interviews with seafarers currently working at engine rooms, they responded about their experience of near miss incidents due to a decrepit indoor environment, a dark working environment, slippery and bright flooring, and stairs that were not suitable for domestic users. Thus, when installing lighting in the future, the brightness of the space should be improved by distinguishing between night and day. A lighting plan considering the location of lighting, level of shadow formation and contrast, reflectance of the facility, glare, color of light, floor color plan, and material selection is needed. A facility design suitable for domestic users is also needed.

Pebble flow in the HTR-PM reactor core by GPU-DEM simulation: Effect of friction

  • Zuoyi Zhang;Quan Zou;Nan Gui;Bing Xia;Zhiyong Liu;Xingtuan Yang
    • Nuclear Engineering and Technology
    • /
    • v.56 no.9
    • /
    • pp.3835-3850
    • /
    • 2024
  • The high-temperature gas-cooled reactor (HTGR) with spherical fuel elements contains complex pebble flow. The flow behavior of pebbles is influenced by various factors, such as pebble density, friction coefficient, wall structure, and discharge port size. Using a GPU-DEM numerical model, the effects of the friction coefficient on the cyclic loading and unloading of pebbles in the full-scale HTR-PM are studied. Numerical simulations with up to 420,000 spherical pebbles are conducted. Four sets of friction coefficient values are determined for comparative analysis based on experimental measurements. Discharging speed, residence time, stress, porosity, and velocity distribution are quantitatively analyzed. In addition, a comparison with the CT-PFD experiment is carried out to validate the numerical model. The results show that near-wall retention phenomena are observed in the reactor core only when using large friction coefficients. However, using friction coefficient values closer to the measured experimental values, the pebble bed in HTR-PM exhibited good flow characteristics. Furthermore, the friction coefficient also influences the porosity and velocity distribution of the pebble bed, with lower friction coefficients resulting in lower overall stress in the bed. The discharge outlet's influence varies with different friction coefficient values. In summary, this study demonstrates that the value of the friction coefficient has a complex influence on the pebble flow in HTR-PM, which provides important insights for future numerical and experimental studies in this field.

Application of Spectral Indices to Drone-based Multispectral Remote Sensing for Algal Bloom Monitoring in the River (하천 녹조 모니터링을 위한 드론 다중분광영상의 분광지수 적용성 평가)

  • Choe, Eunyoung;Jung, Kyung Mi;Yoon, Jong-Su;Jang, Jong Hee;Kim, Mi-Jung;Lee, Ho Joong
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.3
    • /
    • pp.419-430
    • /
    • 2021
  • Remote sensing techniques using drone-based multispectral image were studied for fast and two-dimensional monitoring of algal blooms in the river. Drone is anticipated to be useful for algal bloom monitoring because of easy access to the field, high spatial resolution, and lowering atmospheric light scattering. In addition, application of multispectral sensors could make image processing and analysis procedures simple, fast, and standardized. Spectral indices derived from the active spectrum of photosynthetic pigments in terrestrial plants and phytoplankton were tested for estimating chlorophyll-a concentrations (Chl-a conc.) from drone-based multispectral image. Spectral indices containing the red-edge band showed high relationships with Chl-a conc. and especially, 3-band model (3BM) and normalized difference chlorophyll index (NDCI) were performed well (R2=0.86, RMSE=7.5). NDCI uses just two spectral bands, red and red-edge, and provides normalized values, so that data processing becomes simple and rapid. The 3BM which was tuned for accurate prediction of Chl-a conc. in productive water bodies adopts originally two spectral bands in the red-edge range, 720 and 760 nm, but here, the near-infrared band replaced the longer red-edge band because the multispectral sensor in this study had only one shorter red-edge band. This index is expected to predict more accurately Chl-a conc. using the sensor specialized with the red-edge range.

Numerical Simulation of Dynamic Response of Seabed and Structure due to the Interaction among Seabed, Composite Breakwater and Irregular Waves (II) (불규칙파-해저지반-혼성방파제의 상호작용에 의한 지반과 구조물의 동적응답에 관한 수치시뮬레이션 (II))

  • Lee, Kwang-Ho;Baek, Dong-Jin;Kim, Do-Sam;Kim, Tae-Hyung;Bae, Ki-Seong
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.26 no.3
    • /
    • pp.174-183
    • /
    • 2014
  • Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (II).

Numerical Simulation of Dynamic Response of Seabed and Structure due to the Interaction among Seabed, Composite Breakwater and Irregular Waves (I) (불규칙파-해저지반-혼성방파제의 상호작용에 의한 지반과 구조물의 동적응답에 관한 수치시뮬레이션 (I))

  • Lee, Kwang-Ho;Baek, Dong-Jin;Kim, Do-Sam;Kim, Tae-Hyung;Bae, Ki-Seong
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.26 no.3
    • /
    • pp.160-173
    • /
    • 2014
  • Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (I).

A study on simple nursing activities for the registered nurses and nurse aides in the hospital (단순간호활동에 관한 간호사 및 간호조무사의 태도조사연구)

  • Lee Jung-Hee
    • Journal of Korean Public Health Nursing
    • /
    • v.4 no.1
    • /
    • pp.37-55
    • /
    • 1990
  • Every country in the world has been trying to expand the basic health right for the peoples as W.H.O has established the goal 'health for AU' by the year of 2000. Related to this goal, our government authority has establish the policy 'the insurance of health for all' into effect from July 198\). Recently hospitalshave been making a ceaseless effort for the plan for the rationalization of its management the academic World is making it a subject of discussion by doing the secure of manpower at a resonable level and the increase of productivity by the manpower. As a result of the efforts the study was established to secure the numbers of nursing manpower at a resonable level and use the unskilled persons at the utilizing field and seek the possible area of their activity for more efficient service through the investigation of ablity of simple nursing activities of regiestered nurses and nurse aides for rational function according to the educational levels and talents. The method of study was established by the registered nurses and nurse and nurse aides(R.N 229, N.A 226) who are working in 15 hospitals with over 200 beds. This surrey was conducted from Mar 29, 1989 to April 8, 1989. The method to test the degree of importance, difficulties, and the abillity of performance of a simple nursing activities was classified into 35 activities on the basis of references on this field. The degree of importance was composed from point l(Not so important) to 5(Very important). the degree of difficulties. was composed as follows; very easy - Point 1 very difficult and complicated - Point 5. and the ability of performance was composed from point 1 to 5. The materials gathered through the survey were analyzed with frequency, mean standard deviation, percentage. t-test, Anova, pearson's coefficient of correlation, stepwise multiple regression. factor analysis, discriminant analysis. The obtained results are summarized as follows: 1. The recognition values of the simple nursing activities of each group of registered nurse and nurse aides show; The degree of importance; 4.04 and 4.26 The degree of difficulties; 2.72 and 2.94 The ability of performance; 2.07 and 2.38 The brief summary shows there are little differences between who two groups the simple nursing activities turned out to be easy and simple work. 2. Regardless of the degree of importance, and difficulties, the ability of performance the important in fluencing of the degree of the simple nursing activities between the registered nurses and nurse aides was the order of educational level, hospital career, working career in wards and ages of the registered nurses and ages and hospital creer of nurse aides. The result was that the simple nursing activities could easily be familiar through the training of their working environment and period of experience. 3. Among the 35 simple nursing activities the items capable of resonable entrusting to the nurse aides are 5 that is helping bed-bathing, 8itz Bath, using bed pan, care while delivering patient, accompaying patient when visitor's check. There wasn't and differences between RN and nurse aides in performing the above 5 items. In anywhere. so we can say obviosuly that this nursing activities should be performed under the nursing system of which chief of nurse are supposed to supervise nurse aides as a possible function to be entrusted. In view of the above mentioned results, therefore, this partial functional job of the simple nursing activities can able be entrusted to the nurse aides through the regular training course. In case of these functional activities could be entrusted under, the responsibility of registered nurse, we can able suggest to for that there are the following advantages: 1.. In the nursing activities-affairs, the qualified guarantee of the nursing services can be kept and increased or promotoed with accommodation of the required nursing service and roles being expanded presently. 2. In the productivity of the hospital manpower, therefore, we have comt to view and consider in favourly that when an automational administration times would be come in the near future time to hospital affairs as a reality, to utilize the existing nures aides is better rather than investing so as to develop the other source manpowers or seek its for the efficient business management in the operational strategy or its policy.

  • PDF

A Study on Inhabitants Consciousness of Urban Residential Area Scenic Sites - Focused on Historical and Cultural Environment Conservation Area of Seongragwon(Scenic Sites no.35) Area - (도심지 내 명승 주변지역 거주민의 의식 연구 - 명승 제35호 성락원(城樂園) 주변 역사문화환경 보전지역을 중심으로 -)

  • Yeon, Ung;Lee, Won-Ho;Lee, Se-Mi
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.31 no.1
    • /
    • pp.38-47
    • /
    • 2013
  • This study was performed in order to preserve and protect the scenic sites and surrounding environment is located in the Urban Residential Area. After classifying the type of area surrounding parcels of Seongbuk-dong is located in Seongragwon, Satisfaction Survey, scenic sites designated areas for residents living near the analyzed. Research methods, Cadastral research, literature survey, field survey, and the survey was conducted. Cultural heritage awareness about the collected questionnaires of frequency analysis, and reliability analysis for cultural heritages around satisfaction, satisfaction analysis by parcel area, parcel area for the verification of specific differences regression analysis for the full-on relationship satisfaction, one-way ANOVA was conducted for each. Overall Cultural awareness analysis results, the residence is located close to the Seoul Seonjamdanji, Seongragwon, Simujang, Sanghoe Lee Tae-Joon's houses, Seoul Hanyang castle showed that cultural heritage were know unfulfilled cultural heritage. The purpose of cultural heritage visit was to break/walks. Preservation was usually level and there is no inconvenience caused as a cultural heritage. Regulatory intensity level was usually level and showed a positive reaction to the impact of cultural heritage in Seongbuk-dong image mostly. cultural heritage have a positive impact on the image of the town. but access to cultural heritage is not easy and doesn't affect the life is expected. Overall satisfaction for cultural heritages in the surrounding space, the larger the size of the lot, and higher satisfaction. Seongbuk-dong most of the residents satisfaction was higher. Small lots of residents showed low satisfaction for safety when walking at night, heritage value rise, private ownership of heritage use, harmony with surrounding environment, Building exterior, non-physical uniqueness like culture art mental. It can be interpreted that small lots of residential environment quality is low compared to the large lots, influx of residents in other regions due to the redevelopment of one of Seongbuk-dong, private ownership of heritage use. And generally lower satisfaction on the harmonization of the facility(street lights, signs, etc.). Therefore cultural heritage signs for facility expansion, cultural educational programs, will be needed to maintain the uniqueness village when scenic sites in the city center around the area of management strategy.

Analysis of Surface Dose Refer to Distance between Beam Spoiler and Patient in Total Body Irradiation (전신방사선조사(Total Body Irradiation) 시 Beam Spoiler와 환자 간의 거리에 관한 고찰)

  • Choi, Jong-Hwan;Kim, Jong-Sik;Choi, Ji-Min;Shin, Eun-Hyuk;Song, Ki-Won;Park, Young-Hwan
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.19 no.1
    • /
    • pp.51-54
    • /
    • 2007
  • Purpose: Total body irradiation is used to kill the total malignant cell and for immunosuppression component of preparatory regimens for bone-marrow restitution of patients. Beam spoiler is used to increase the dose to the superficial tissues. This paper finds the property of the distance between beam spoiler and patient. Materials and Methods: Set-up conditions are 6 MV-Xray, 300 MU, SAD = 400 cm, field size = $40{\times}40cm^2$. The parallel plate chamber located in surface, midpoint and exit of solid water phantom. The surface dose is measured while the distance between beam spoiler and patient is altered. Because it should be found proper distance. The solid water phantom is fixer and beam spoiler is moving. Results: Central dose of phantom is 10.7 cGy and exit dose is 6.7 cGy. In case of distance of 50 cm to 60 cm between beam spoiler and solid water phantom, incidence dose is $14.58{\sim}14.92cGy$. Therefore, The surface dose was measured $99.4{\sim}101%$ with got near most to the prescription dose. Conclusion: In clinical case, distance between beam spoiler and patient affect surface dose. If once $50{\sim}60cm$ of distance between beam spoiler and patient, surface dose of patient got near prescription dose. It would be taken distance between beam spoiler and patient into account in clinical therapy.

  • PDF